Find local power point installers in Sydney Northern Beaches

Hi, I need a quote to complete some bathroom electrical work. I have attached photos showing that 25mm conduit is already installed in the wall from the existing switch box to both new locations. ​Mirror: Hardwire a new LED mirror. ​Vanity: Install a surface socket behind the vanity to plug in a pre-wired drawer power board. ​Switch: Replace the existing double GPO/switch combo plate with a single light switch (I will supply the new plate). ​Please let me know your estimated cost and availability. Obviously must have licence and provide certificate.

Install two new ceiling fans (and remove current ones), add two new plug points in bedrooms, reinstall bathroom light / heating lamp

I Need a licensed electrician to fit two double GPOs inside an existing wall mounted shaving cabinet in a bathroom. All the prep is done: - Cabinet is installed and fixed to the wall - Cut-outs already made in the cabinet back panel - Cables (TPS) already run and pulled through, ready to terminate - Outlets and mounting brackets are on site no materials needed Scope is purely termination and fit off: mount the brackets, terminate the outlets, secure them neatly, test and make good. Should be well under an hour for someone with the right gear. Requirements: - Current NSW electrical licence (please include your licence number when quoting) - Certificate of Compliance for Electrical Work (CCEW) provided on completion Location: Dee Why.

Looking for a licensed electrician to update around 50 switches/power points in our home. We’d like to replace the existing switches with new ones that we have already purchased. All replacement switches, outlets, dimmers and fan controls have already been purchased and will be supplied. The job consists of: 27 switches / controls Narrow switches: * 5 × single * 9 × double Standard switches: * 1 × five-gang * 3 × double * 1 × triple * 1 × single Components: * 2 × fan controls * 5 × dimmers 23 power outlets * 23 × double power points In addition to replacing the existing switches, We’d also like to: * Add 3 new power points/switches * Install 1 new ceiling light Looking for someone experienced, reliable and reasonably priced. Please send through your availability and an approximate quote. Thank you!

Need the power points and data/antenna points on my fireplace feature wall recessed into the plasterboard so a Samsung Frame TV can mount completely flush against the wall. The job: Cut recessed box into gyprock for existing power point (left socket) Cut recessed box into existing data/antenna point (right socket) Install recessed wall plates so plugs sit inside the wall cavity, not protruding Wall is standard gyprock on the fireplace feature wall (single storey height section) One Connect cable conduit already runs through the wall — just the sockets need recessing Notes: This is for a Samsung Frame TV which needs to sit completely flat/flush against the wall The existing sockets are standard surface-mount plates Need a licensed electrician (electrical work requires licence in NSW) Location: Manly Vale 2093 When: This week if possible

Looking for a licensed electrician for a few small jobs in one visit: 1. Replace 2 existing wall sconces with new light fittings (new fittings will be supplied) 2. Install a new backlit mirror (power connection required) 3. Fix a double power point – one socket isn’t switching on All fittings/fixtures will be on-site and ready to go. Looking for someone with the right licence/certification who can provide a compliance certificate if needed. Category: Electrical Location: Allambie Heights, NSW 2100 When: Flexible – within the next week Budget: $300

We're looking for a licensed electrician to install a new power point above our shelving. The cable can be run down from the ceiling cavity directly above, so it should be a straightforward installation. We expect the job to take around an hour, and our budget is approximately $500. Please send through your offers. **Licensed electricians only, please** Thanks!

Power point has come away from the wall and needs re-fixing. The screws are still in place but looks like they are not gripping into anything

I need a certified electrician to install a double power point inside a small overhead hallway cupboard, ready for an NBN installation happening this Monday afternoon. Details: • Location: Overhead cupboard in the hallway, above the bathroom door (about 2m up, easy ladder access) • The cupboard sits directly below the ceiling, and there’s roof cavity access above, so the cable run should be straightforward • I need a DOUBLE power point installed inside the cupboard (one outlet for the NBN connection box, one for the WiFi router) • Must be completed before NBN technician comes in which is Monday (1-5 PM time slot) • A certificate of electrical safety must be provided on completion Please only apply if you are a licensed electrician and can complete the job either this weekend or Monday morning.

Looking for an electrician to complete a small residential job in my apartment. The apartment was built around 2000, so the wiring is relatively modern and I don’t anticipate any major issues. Work required: Light switches and power points + two LED lights replaced, includes - * Replace 11 × double power points * Replace 1 × quad power point * Replace 6 × single light switches * Replace 1 × two gang light switch * Install 2 × two gang LED dimmer/switch combinations * Might need 1 × surface mounting block (bathroom) * Install 2 × new Martec Fino LED ceiling lights, replacing two existing LED ceiling lights (same locations, pretty much the same lights just a bit bigger, no new wiring required ect) I will supply everything, it’s Clipsal Iconic and I think the old ones are HMP: * Clipsal Iconic switches and power points * Martec Fino LED lights * Dimmers * Mounting block I’m looking for: * Licensed and insured electrician * Neat, professional installation * Experience installing Clipsal Iconic products and LED dimmers Preferred, not necessary though Photos of the existing switches, power points and lights can be provided if needed

I need a new power point installed in bedroom, a replacement power point in the lounge room and a security light installed on the front porch

Hi! Looking for a licensed electrician to help with a few electrical jobs around the house: Tasks: Fix/replace outside balcony light The top and bottom covers screw off Uses 240V GU10 bulbs (can get replacements from Bunnings if needed) Fix broken outdoor power point Fix broken indoor light Install new power points: One near coffee machine (kitchen area) One in bedroom near cabinet Notes: Please quote for parts + labour Happy to get advice on best placement for new power points Prefer licensed electrician for safety/compliance Flexible with timing Let me know your experience and if you need any more details or photos. Thanks!

I need someone to supply and install a proper weatherproof “in-use” outdoor power point cover for an existing outdoor outlet near my pool. There is a pool light and a Philips Hue smart plug connected, and the outlet is currently exposed to the weather. I want it made rain-safe and suitable for outdoor use while a plug is connected. Task includes: Supplying a suitable IP-rated in-use cover Installing and sealing it properly Checking the setup is safe Please include in your offer whether you are a licensed electrician and an estimate for parts + labour.

Looking for an electrician that can install 4 x power points

I need to install a 20amp power point about 5 meters away from a 20amp switch (see pictures). I also need to install a regular power point

I need to install outdoor power point. The closest power point is on internal side of the wall so would need to have conduit (2m) on the external wall to the new power point.

Need an electrician to help move a powerpoint from behind the freezer to above it

We are renovating a laundry and need to move a power point from the side wall to back wall and install a new one above where the sink is going (see images)

Electrican to connect 2 x brand new ceiling fan and also exterior power point

Investigate burn mark on laundry plug point and repair or replace as required. Licensed electrician only please. Preferable for new plug point to be included/supplier please.