Find trusted local electricians in West Melbourne

Iv been told the fan needs to be first placed on a piece of wood then go on wall , no electrical work required as the lead just goes into a power point .

I hear a noice from the (around) hot water solar panel I heard the water kept draining through the down pipes. Possibly the faulty thermostat

Licensed electrician to replace 2 outdoor floodlights with Eufy floodlight cameras (1 simple swap + 1 fault-find & repair) — Williams Landing 3027 I need a licensed electrician in Williams Landing (VIC 3027) to replace two existing hardwired outdoor floodlights with new Eufy floodlight security cameras. I will supply both Eufy cameras myself. I just need labour, installation, and supply of any minor electrical parts if needed (e.g. a replacement switch or terminals). Both Eufy units are 240V hardwired floodlight cameras (AC 100 to 240V), and both go in the same spots as the existing floodlights, so the mains wiring is already in place. Both lights are at single-storey height, so a ladder is enough (no scaffolding or elevated work platform needed). Light 1: Front (straightforward swap) The existing front floodlight works perfectly. This is a simple like-for-like replacement: remove the old floodlight, then mount and wire the new Eufy in its place and test it. Light 2: Rear (troubleshoot, repair, then replace) The rear floodlight currently does not work and needs fault-finding before the new camera goes up. What I already know: * It has its own wall switch (one of two switches on the same plate; the other switch works fine). * No circuit breaker or RCD has tripped, and the rest of that circuit has power. * So the fault is most likely in the switch contact, the switch-to-light wiring, or the old fixture itself. I need you to diagnose the fault, repair it (e.g. replace the switch or re-terminate the wiring), and then install the new Eufy floodlight camera in that location. What I need from you: * The license required for this work. * A Certificate of Electrical Safety (CoES) on completion. * A fixed quote covering: front swap, rear fault-find, rear repair, and installation of both cameras. Please state clearly if anything like a full re-wire would be charged separately. * Please bring standard parts in case the rear fault needs them.

I have a light that need to be put back in the socket in the roof. The cable that plugs into the light switch has fallen into the wall behind the plug and is not reachable from the roof socket. I need someone to feed the cable back into the roof and plug the light back in.

My house aircon machine (outdoor unit) is having loud buzzing sound. Need someone to have a look and fix it

Install three outdoor light fittings

Dear Tasker, I am looking for a licenced Electrician who has experience installing screens please, you will also need an apprentice due to the size of the screen to assist with lifting. Scope: 1. Remove existing 86" LCD screen from floor standing bracket 2. Mount new supplied bracket into new wall location 3. Install the existing screen on to bracket 4. Start at 6pm, with an estimate of 2 hours max. 5. You will be assist remotly be a Senior Tech to setup the new screen (takes around 20 mins using remote) 6. GPO will already be in place you just need to plug it in! Feel free to reach out with any questions! Thank you.

Hi, I need help with someone supplying and installing 2x Clipsal Iconic double power points. You’ll be supplying all parts/materials required. Please quote accordingly.

Have a vintage light that has been professionally wired by an electrician to be bolted into a ceiling beam and hung over the dining room table. Have the correct bolt to secure it and separate wall switch if required. Need two hardwired halogens swapped over to led plug in lights. The vintage light fitting works perfectly with the new transformer. I just need a sparky that appreciates the effort I’ve gone to in bringing this beautiful old fitting back to life so it can be hung and enjoyed. Halogens an easy no fuss switch. Have costed the job on 2 hours at $100 per hour for the light fitting and 30 mins for the halogens. Would like done tomorrow or early Sunday morning. Located Yarraville Any questions just ask. Thanks

Downlights to be purchased and installed at Wyndham vale property

Licensed Electrician Required – Tesla Charger Installation & Minor Electrical Work Single-storey home with three-phase power. Looking for a licensed electrician to complete a Tesla wall charger installation and a small number of electrical maintenance items around the home. Please provide a fixed-price quote after reviewing the photos and job details. Preference for electricians experienced with EV charger installations and able to provide all required compliance certificates. Location: Tarneit Please quote your total price and earliest availability.

I require a licensed electrician to complete the following electrical work: 1. Install Bathroom Heat/Fan/Light Unit: Supply not required – I will provide the unit. Install and connect the IXL Tastic Original 3-in-1 Bathroom Heat, Fan & Light. Replace the existing Clipsal wall switch with the appropriate wall switch that came with the unit. Existing bathroom downlights and exhaust fan functionality must be retained and continue to operate correctly after installation. No bathroom wall tiles are to be damaged, removed or broken during installation. Photos of the existing setup is attached. 2. Supply and Install Two External Downlights: Supply and install 2 new LED downlights outside the house near the left-side gate. There is an existing downlight in the area which can be used as a reference point for installation. Electrician to supply all fittings and materials required. 3. Replace Toilet Light Bulbs with Downlights: Supply and install 2 LED downlights (one in each toilet) to replace the existing light bulb fittings. Existing Clipsal wall switches are to remain in use and continue functioning normally. Electrician to supply all fittings and materials required. 4. Wiring and Electrical Work: Electrician to supply and install all wiring, connectors, cabling, mounting hardware and any other materials required to complete the works. 5. Electrical Certificate: Provide the required Electrical Safety Certificate / Certificate of Electrical Compliance upon completion of the works.

I just need a power point moved by a qualified contractor from its current location so we can install a set of wardrobes

3x white downlights and 2x three spotlight black ceiling lights need to be installed.

Electrical compliance inspector reported they cannot service the smoke alarms since they are connected to a non functional/problematic security system. I need someone to either fix the security system or disconnect it. Can't get hold of the original installer

Need to install 4 ceiling fans 2 with chandlier in single story tiled roof house and need 3 power points on different walls.

I need an electrician to create a power point on that wall.

Seeking professionally licensed electrician to install 4 standard power points in our single storey house (built 2018), in Fraser Rise. Interior walls with standard timber and plasterboard walls; standard / high pitch roof with access to wall studs. Certifications required: A-Grade Electricians License and registered as a Registered Electrical Contractor (REC).

One standard light switch to be replaced as one of the buttons has loosened, sunken into the cavity.

Sliding gate motor is working but very slow. We think the bearers inside are worn? Requires assessment and repair. Job location: Maidstone