Find trusted local electricians in West Melbourne

I will supply the Heat Pump unit and need a Licensed Plumber to install it. To replace an old solar+gas boosted system (still working), thank you.

Removal of redundant electrical items and plaster touch up: - fan control switch located on bedroom wall. - old security sensors & wall control unit - old smoke alarm

Replace bulbs to down light and ceiling lights 1. Existing down light to led down lights - 12 2. Bulbs to down light - 5 3. Bulbs to ceiling lights bedroom - 4 4. Bulbs to heater light bathroom - 3

Looking for an experienced licenced electrician to Instal a new power point (2 points) - See the photo for a reference.

Replace 3-4 light switches that are missing switches or damaged.

The Element of our oven is not working and needs to be replaced. Hence seeking a qualified electrician who can complete the job & provide a certificate on completion.

2 x pendant lights to be installed above kitchen island (current there are no lights directly above kitchen island so will require new switches) 1 x pendant light above dinning table [current there is a light here, but want separate switch]. Photos attached. I have already bought the pendant lights and bulbs.

exhaust fan in toilet, 1 pendant light and some downlights in all rooms

Need to get my existing internet cable replaced from CAT 5e to CAT6/7 and also need 2 extra data points in my home

Hello, We are looking for a licensed A-Grade Electrician to attend our retail store, at Watergardens Town Centre, to replace a faulty ceiling downlight. The Issue: One of the recessed ceiling downlights on our main sales floor is out. This has created a dim spot in the store and affects the overall professional presentation. The Job: The task is to replace the faulty LED downlight to restore full lighting. The scope of work includes: 1. Safely accessing the light fitting in the high ceiling (a suitable ladder is required). Approximate ceiling height 4.5 Meters. 2. Diagnosing the fault (e.g., failed LED unit or a faulty driver). 3. Supplying and installing a new, suitable replacement LED downlight and/or driver. 4. Ensuring the new light's colour temperature and brightness matches the other existing lights in the store. 5. Testing the new light to confirm it is fully operational. Please note: The successful contractor must be able to source and supply the correct replacement light as part of their service. The cost of the new light should be included in your offer. Requirements: - MUST be a fully licensed and insured A-Grade Electrician in Victoria. - You must have your own tools, including an A-frame ladder appropriate for a high commercial ceiling (ceiling height 4.5 meters). - Experience with commercial lighting, particularly recessed LEDs, is essential. Location & Timing: Location: Watergardens Shopping Centre 399 Melton Hwy, Taylors Lakes VIC 3038 (exact location will be provided once the task is assigned). When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying one new standard LED downlight fitting. Thank you.

Replace 2 ceiling light fittings with new provided light fittings, and install 2 wireless switch adapters (provided) into existing shutter switches

Power point stopped working and needs fixing.

Electrical Works Job: Single Phase Mains Upgrade Scope of Works: • Supply & install 16mm² SDI (red & black) • Supply & install single phase fuse box • Supply & install smart hinge meter panel • Supply & install earth electrode with 6mm² earth cable • Complete switchboard upgrade (including surge protector) • Engage electrical inspector & provide prescribed certification of electrical safety

Need someone to install 3 battery based smoke alarms which I already have in my home.

I need electrician to put a powerpoint in my attic. 2 slot powerpoint each. Please give me a quote. Melton West, 3337

PLEASE READ TASK DESCRIPTION. I WILL NOT HIRE ANY STOCK RESPONSES. Sensor light installation with light switch wired to enable manual mode (always on). Install three pos light switch (see pic). I currently have a sensor light installed, however not sure if it has a manual mode option, therefore have purchased ‘Brilliant Black Raptor III Twin Security Light with Sensor’ (see pic and manual). - 3 pos light switch supplied - Sensor light supplied You’ll need to run an additional wire from new 3 pos switch to sensor light. There are currently three wires running from light switch to current sensor light. Inside light switch is approx 3 metres from sensor light. Roof is tiled.

I have a switchboard that looks like the B&R horizon T22 switchboard (long). The 2 hinge parts on the right (that allows the door to open l) has broken due to wind action and an ajar door. The broken hinge part looks like the attached photo. Can someone provide 2 of the hinge parts and install/fix the door such that the switchboard can be closed again?

I have several power outlets in my home (living room and kitchen) that are not holding plugs properly. Whenever I try to plug in multiple devices in the kitchen they pop out, and the living room plugs won’t stay in at all anymore. I want a licensed electrician to: 1. Inspect the affected outlets. 2. Replace any worn or faulty outlets. 3. Ensure all outlets are safe and functioning correctly. Must be a licensed and insured electrician. Requirements: Provide a quote including labor, materials, and any call-out fees as well as estimated job time/availability Thank you 😊

I have an island kitchen bench, and I would like to instal a PowerPoint for my devices. There is power to the island bench for the dishwasher, The PowerPoint is to be installed on the wood grain veneer surface of the kick panel shown in the picture. I’ll supply the PowerPoint as per the attached pic.

1. Install a new double power point behind fireplace. Location: Ground floor of a double-storey house There are existing power points on both sides of the target wall (easy access). Already have power point purchased to use. Wall is plaster, not brick. 2. Install an outdoor sensor light I have the light just need it installed. Wiring already in place (just needs mounting + connection). Located near back door, reachable with a standard ladder which I have. 🛠️ Bonus Task (Optional): Trim skirting board. I’m installing a freestanding electric fireplace and want it flush against the wall. Skirting board is blocking it from sitting flat. If you're handy and can cut/trim a section of the skirting, happy to pay extra for that too. Please send through your quotes, thanks 😁 (quote for labour only, I have the power point and sensor light) *Please add quote including ALL fee's, thank you