Find trusted local electricians in Glen Waverley

Replace 2 faulty transformers for 2 LED downlights.The LED downlights are working fine just the faulty transformers.

I have 10 year old double storey house with ducted gas heating, I need to change heating and cooling to ducted reverse cycle air-condition system under the government rebate, house is located in Glen Waverley VIC 3150. I am writing to you to get someone come in and give a quote Coming to property is must, and also it is required person to go to the roof and check zoning possibilities. Based on the advised I received from my house builder, followings are possible the way they have done ducting works, current ducts are R1.5 and in very good condition. I m looking for a system with 8 zone (Airtouch 5 - 8 zones with each zone having ITS to control the temperature) If you are interested, please send me an email for me to give you a call to arrange the time to come and see the job. Two systems I m currently interest about are Midea (MDV-V230WN1(AU)) and Panasonic (U-8LZ2E8)

electrician required. whole house renovation, would like to change light to downlight and add extra downlight for the house.

I’m looking for a licensed plumber to help with my pool setup in Glen Waverley. The job involves disconnecting the existing pool water pump so the new 24 kW pool heat pump can be installed, and then reconnecting the pump through the heat pump once the heat pump is mounted—adjusting the plumbing so it sits closer to the new unit. What’s needed: Safely disconnect the current pool water pump. Return after the heat pump is installed to reconnect and realign the plumbing. Extend/adjust PVC pipes or fittings if needed. Check for leaks and ensure proper water flow once reconnected. Details: The heat pump will be wall-mounted beside the existing pool equipment area. Easy access, with power and plumbing already nearby. Prefer a fixed quote over hourly pricing. Ideal for someone experienced with pool equipment or heat pump setups. Please include your availability, because then electrician has to work around it for connecting and mounting of the pump.

I am looking for getting around 50 downlights installed to a single story home in glen waverly with the 7 dimmers and couple of power point and switch upgrades.

Need electricians come on Monday morning to run the wires for new 4 down lights befor why new plaster install in the car garage. Quote for 4 new down lights

Please supply and fit a light fitting to replace our existing unit. The current unit was fine but the started for the fluorescent tube has stopped working and we need to replace the fitting as it is built in. The light is in a laundry so does not need to be fancy. Open to having the current light fixed if that is possible, we have new tubes. I believe the current light fits the T4 size globe.

Need to replace damaged light fitting to external brick wall.

Install additional down lights: 10 No. (Downlight will be supplied ny owner) Install additional GPO in new double storey house: 10 No. Install pendant light: 1 No. (light will be supplied by owner) Replace existing wall light: 4 No. (light will be supplied by owner) Install strip LED under overhead kitchen cupboard: 2m long.

We are looking for a licensed electrician to help us assemble and install a light fixture. • The light requires assembly first, then installation • A Chinese instruction manual is provided (we can assist with translation if needed) • Ceiling height is approximately 5–6 meters, so scaffolding will be required • Must be a licensed electrician with experience in similar high-ceiling installations The weights of the lights is around 35kg and should have access to the roof.

The roller shutter is not rolling back and it is on second floor

The roller shutter is not rolling back, but the motor is working. It is on second floor.

Task: Supply & Install 9 Battery-Operated Smoke Alarms When: Flexible – ideally within the next few days Where: [Insert your suburb], Victoria Job Details: Looking for someone to supply and install 9 battery-operated smoke alarms in my home. These are not hardwired, just standard battery-operated alarms that need to be securely mounted. Smoke Alarm Locations: 7 bedrooms (1 in each room) 1 hallway upstairs (next to the washroom) 1 in the open-plan kitchen/dining area downstairs Requirements: Supply 9 battery-operated smoke alarms (must be compliant with Australian Standards) Supply batteries Install all 9 alarms correctly according to fire safety guidelines Bring your own tools (e.g. ladder, drill) Must have WhatsApp for easy and seamless communication After the job is completed, you must send a video showing all 9 installed smoke alarms as proof of completion Please include in your offer: Total quote (including labour, alarms, batteries, and any call-out/materials fees) Confirmation that you can provide a completion video Confirmation that you use WhatsApp Looking forward to your offers. Thanks!

I need a certified installer to install my electric hot water unit heat pump. That person should be able to apply for rebates for me as well and remove existing gas unit.

I’m looking for a licensed plumber and a licensed electrician in Victoria to carry out the mandatory Gas Safety Check and Electrical Safety Check for a rental property (singlez-storey house), as required under the Residential Tenancies Regulations (VIC). Requirements: • Must hold current VIC plumbing/electrical licences. • Must be able to issue compliant safety reports valid for rental compliance. • Reports should include all checks required under the Victorian rental regulations. • Work to be completed on-site at [your suburb]. Please provide: • Your licence number. • Availability. • Your quote for both reports (combined or separate).

Replace existing 8 down lights with LED lights and provision 2 new LED lights. Lights and conversion plates will be provisioned.

Switchboard upgrade for the compliance test

I need one data cable running from front of the house to the back (mostly through the roof cavity)single storey and a new switch to a batten light in a bedroom (light already exists)

Wall Mount 55" TV + Provide Electrical Point (Licensed Electrician Required) I need assistance with wall mounting a 55-inch TV and installing a new power point behind it. Single Storey House Scope of Work: Wall mount a 55” TV in the middle section of the wall (area marked in the attached image). Slim wall mount bracket is preferred – please mention if included in the quote. Otherwise, I’m happy to supply one from Bunnings. A licensed electrician is required to: Run power from the TV location to the point highlighted in the bottom-right corner of the image, where there is an existing powerpoint located behind the wall. Internally route the power cable through the wall cavity. Finish with a blank wall plate for a neat look. Additional Notes: No antenna or set-top box connections are needed. All wires must be completely hidden. The finish must be neat and professional. All work must comply with local electrical standards and safety codes. A tax invoice must be provided upon completion. Looking forward to receiving your quote.

I need to get 2 new power points in my garage to install rolling doors. It needs to be in between the doors as shown in the picture. I have given photos of other power points in the garage to make the job easier.