Find trusted local electricians in Croydon VIC

Qualified technician needed to replace 5 pieces smoke alarm, ceiling mounted. To issue certification after job is done. We have the smoke alarm already .

Some power points can't be used and will trigger outage if been used. including light switch and power socket

(updated) I need a licensed electrician to install seven (7) power sockets and two (2) switches, 2 or 5 ceiling lamps, and connect all the existing wiring in my workspace shed. All materials (sockets, switches, cables if needed) will be provided separately. The insulation and framework are already in place. The wiring is pre-installed but needs proper connection and safety checks. A standard 2.5mm wire has been installed for power sockets and 1.0mm for lights, both fully visible in the shed. Additionally, the job requires digging the ground and laying underground wire from the garage switchboard (Switchboard No. 3) to the shed. Based on the attached ground plan, Path No. 2 is most likely the correct route to follow. The estimated cable length required is approximately 29 metres. Please include in your quote the labour for trenching, running the cable, and installing the most appropriate switchboard in the shed. Must ensure the entire installation is compliant with Australian electrical standards. I’d like a quote upfront for the labour cost before proceeding. Attachments: - Shed and property ground plan with proposed trench path (Path No. 2) - Image of garage switchboard (Switchboard No. 3) Please note: I only require a quote for the labour cost. You are welcome to provide an estimate for the materials if needed, but I will cover all material costs separately. Materials will either be supplied by me directly or purchased based on your advice, with a separate receipt provided for any reimbursed items.

Split system in upstairs bedroom frequently showing “F0” error and ceasing to blow cold air.

All light fittings supplied. 3 x ceiling fan replacement (with built-in LED light). Current ceiling fans are old and noisy. 5 X Replace existing oyster ceiling light fittings with new LED ceiling light fittings. 2 X Relocate existing DGPO and TV point from floor level to behind TV at approx 1800mm height.

Light switch cable has break somewhere in line so looking to re wire down lights through to new light switch and make current switch a double switch. Worth it only for someone already in the area

Looking for a professional to install a brand-new AC system for a bedroom (2.5m x 2.5m). Details: Type of Installation: Wall-mounted (Back-to-Back) AC Specifications: 2.5kW unit Building: Single-story, brick wall, tile roof Distance: Approx. 20m between the switchboard and installation point The price must include all costs, including certification.

electrician needed for one room located in garage. its a new room with studs exposed. roughly 6-8 power points, 4 downlight, a fan switch then connect to power. materials supplied.

Change two downlights in at house in croydon

Each time AC is switched on, the power in one part of the house gets tripped. This keeps happening every time, we try to turn on the AC. Need an experienced electrician to troubleshoot and fix the issue.

Looking for a licensed electrician to swap out the old ceiling spotlights in the kitchen with the new ones we've got, like in the pics. They should be insured too!

1. One of my down light in living area has stopped working, Looking for some one who can bring matching downlight and replace it. 2. I also need one 70 watt halogen bulb preferably Brilliant but other brand with matching color temperature is also ok , if you have it you can bring it too to replace it. Pic attached Attaching picture of downlight here

I need to have 3 x ceiling light fittings changed over to new ones we have purchased, I want this work done by a qualified electrician. I will provide photos tomorrow. We are removing the old gold ones and replacing with the white fittings

Unwire all 5 cctv cameras in home and any hard drive and monitors and help with all electrical cords to be relocated. Some run through an external Wall but this needs to be done asap today before 4pm! Quick and easy job! Need to provide invoice for payment !

Assess if light fittings are broken and if wiring for light fitting is safe in our bathroom,dining room and front porch.

4 new points 2 on 1st floor 2 on ground floor (double storey) and 4 replacement points I have the power points, checking my garage sensor lights and fitting few ceiling lights.

I need to install few power point and shades for lights at my residence.

I have rebuilt a brick garage opening which was damaged. The old light fixture which is still working but cables look like they've come slightly undone. Need an electrician to cut back the cables and connect light fixture to the brickwork. If this cannot be done, then supply and connect a new light which is similar to the old.

Require x6 slimline warm light downlights to be installed in carport. There is a 45mm cavity to attach to cement sheeting. Wires from lighting on existing carport still connected to light switch inside. To also include sensor. Price to include all costs (air tasker fee, labour, lights and materials).

To install the existing heater exhaust fan (supplied by me) and connect to the existing switch; the current one is broken and has been taken off; to replace existing 4 power points and existing 4 switches need to be replaced too