Find trusted local electricians in South East Perth

Outdoor front 3 light to be replaced Door bell change 2 Bathroom mirror plug 🔌 installation Alfresco lights installation need connections Diwali lights

We have an 85” Samsung Frame mounted on our wall and wired into the wall. We are wanting this moved to centre the wall. We want the wiring to still remain inside the wall but new holes will need to be drilled and the existing bracket will need to be moved. Please send an offer, we would like to hire someone who has done this before with a Samsung frame.

Connect an automated gate to the meter box which is roughly four metres away. Will need trench for cabling. Connect power to a sea container from workshop power about four metres away.

I need a licensed electrician to remove & install a new fluorescent light fitting in my wardrobe. The existing one has stopped working. Also wanting to run a new PowerPoint in the wardrobe

install a new double power point and change an existing single power point to a double

I have down lights that have come out of their plugs and we need them reconnected in the roof! Would mean climbing in to the roof and connecting them back up as well as putting in new ones that have blown we have the new ones ready to go

Need to install a pendant light in kitchen. The JP is already installed in roof with light button. Also need to install a 86” TV on wall

Toilet light & exhaust fan is not working Budgeted amount is for labour. Material extra on actual.

I’m looking for a electrician/HVAC technician to inspect two issues at our café. 1. Kitchen exhaust / canopy fan The VACON HVAC controller recently showed an “Overvoltage – Fault Code 2” and the exhaust fan stopped working. After resetting the controller, it started working again, but I would like the cause properly checked before it happens again. 2. Hot water system The hot water unit is also tripping when in use and needs to be inspected. Budget: $100 for initial inspection and fault diagnosis only. As we don’t know the exact faults yet, any repair work can be quoted separately after inspection Location: Armadale

Looking for a licensed electrician to install 2 powerpoints in our existing home in Rivervale. They’re needed for an HP Latex 335 printer. HP has advised that the printer can use either 2 x 20A or 2 x 15A power connections. I’m looking for someone to have a look at the existing electrical setup and install the appropriate outlets/circuits for the printer. Happy to discuss the best option with you and provide any details about the printer if needed. Please quote for labour and materials. Licensed electricians only 😊

replacement of current unit (has broken down), - I have measured out that i need additional 4-5m of tubing to be run vs back-to-back install. - may need new wall brackets (approx 60cm above ground) - power requirements are same as existing system once ive got an arranged installer via this platform, i'll place order for the unit to be shipped. happy to also get an additional quote if the installer wants to include the system (daikin alira x 7.1kw)

I’m looking for a WA licensed electrician/electrical contractor with EV charger installation experience to install a MG 7kW Charge Hub Pro at my home in Willetton. Charger supplied by me - MG 7kW Charge Hub Pro - 7kW single-phase - Type 2 - 5m cable Existing setup - Existing residential switchboard as shown in attached photo - Property has solar installed - Existing main switch appears to be around 40A, but this must be verified onsite Scope of work - Inspect the existing switchboard and confirm whether it is suitable for a dedicated 7kW EV charger circuit - Confirm available supply capacity and phase loading - Supply and install a dedicated 32A circuit for the charger - Supply and install all required cable, conduit, breaker/RCBO, isolation and protection devices - Carry out any minor switchboard modifications reasonably required to make the installation compliant - Mount and connect the MG Charge Hub Pro - Test and commission the charger - Provide all required WA electrical compliance/certification documentation Important Please base your offer on a complete, compliant installation, including labour and standard materials. If inspection shows that a major switchboard upgrade, consumer mains upgrade, or other substantial additional work is required beyond a normal EV charger installation, please discuss this with me before carrying out that additional work. Please include with your offer - WA electrical licence / contractor details - EV charger installation experience - Confirmation that your price includes standard cable, conduit, breaker/RCBO, installation, testing and certification - Installation warranty - Earliest availability I can provide photos of the switchboard, proposed charger position and likely cable route before the job. Only licensed electricians able to certify the complete installation, please.

Installation of one pendant light in dining area. IKEA PS 2026. Quick installation. All parts ready

looking for a plumber who wants to take on extra jobs.

There is an electrical plug near to the toilet floor. Need this to be moved up and connected to a RCD plug. Not sure of the price. If they can be a team to fix the tile it will be perfect and extra will be paid.

Dryer cord got very hot and damaged outlet, needs replaced or at least checked. Dryer also needs tested to see if that was the issue. I work during business hours, can only meet after 5pm or weekends

I need 2 new plug point for my patio area. Replacement of 3 lights above my kitchen bench ( existing wiring and switch is there, just to remove 3 old lights and fix new lights, all 3 lights run from the same circuit and switch. I need a new power connection for my ceiling of the patio to install my ceiling mounted space heater.

Needing someone to complete: 3x Ceiling Fan Installations - will be fitted to replace existing light. Fan is remote controlled. Will be installed to 3 bedrooms upstairs - gyprock ceiling. 2x Ceiling Downlight Replacements - will be fitted to replace existing light panel - concrete ceiling in living area. I’ve already purchased the ceiling fans and downlights. Happy to answer and questions you may have. Open to all quotes.

Hi, We need help installing a new solar panel on the wall shown in the attached photo. The previous panel has already been removed, this job involves drilling 8 holes and securely mounting the new panel in its place. Details: Height: around 4–5 metres Location: Burswood Surface: driveway is on a slope, not flat (as visible in the photo) I can assist on-site, but only limited help available Looking for someone with the right tools and experience. Need this asap.