A close-up of a person installing a new light bulb.
A close-up of a person installing a new light bulb.

Find a trusted local light installation service in South East Perth

Fill in a short form and get free quotes for local light installation services

4.2

Great rating - 4.2/5 (11114+ reviews)

Get help from a local light installer

  • Recessed lighting installation near me
  • Fluorescent light installation
  • Emergency light installation
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated light installation experts near me

Recent Light Installation reviews in South East Perth

Excellent job and excellent services Really will recommend him For any kind of electrical and comms works

Downlight installation, power plug install and wall TV Mounting

$1,000

Rhys was great, just had a delay which wasn’t his fault!

Stereo Head unit installation and spotlight install Fiat Ducato

$200

Great job. On time . Friendly. Will definitely use again

2 X Ceiling fans and 5 X led downlight install

$250

really good service

Down light install

$100

Brent was very communicative both prior to the work and during the task completion. His work standard was very high and he completed the task very efficiently

Security light installation

$1,000

super helpful, got my lights installed perfectly and was even able to help with some small issues along the way!

Smart light installation

$300

What's the average cost of a light installation expert in South East Perth

$225 - $495

low

$225

median

$450

high

$495

Low, median and high bar chart distribuiton

Average reviews for Light Installation Services in South East Perth

based on 10 reviews

4.9

9
1
0
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

12+

Tasks successfully completed

2

Average amount of offers per task

1

 hr

Average time to receive offers

What do light installation services include?

Your light installation service includes planning the wiring route, cutting a hole in the ceiling or wall for mounting the light fixture if necessary, installing a new or replacement fixture, wiring the light, wiring a dimmer switch if required and testing the replacement light installation. Note that before the installation step, your light installation expert cuts off the power to the lights. 

Planning the wiring route

Your electrician begins by planning how to wire the new light fixture if necessary. Wiring a light fixture involves measuring and cutting a sufficient length of wire that leads from the junction box or power source to the light fixture.  

They may make the wiring a little longer than required to give the wires slack and provide extra material to cut and splice in case the wire becomes frayed later on. Your light installation expert should plan and install the wiring following established safety codes and standards set forth by your state.  

Cutting a hole into the wall or ceiling

For a new light installation, your hired light installation expert proceeds to cut a hole into the wall or ceiling where you want the new light fixture. They can do the appropriate measurements for mounting the light fixtures, light switch and dimmer switch installation if necessary.  

Your light installation expert can cut the right-sized hole for your new lights and install them, whether it be LED lights, sensor lights, ceiling lamps, bathroom lights, or chandelier. Note that they may have to do some simple carpentry if no mounting holes exist and if some holes aren't the right size or aren't cut according to building codes.   

Installing the light fixture

Your light installation expert proceeds to install the light fixture. They mount these on the holes cut into a wall or ceiling, then secure them with the included screws. If necessary, some experts may drill additional holes to allow for screws or securing brackets. 

Connecting the wiring 

Next, your light installation expert proceeds with installing and connecting the wiring that comes from your junction box and links these to the new light fixture. Your light installation expert may attach mounting brackets to secure the wiring and ensure that it doesn't sag or come loose. They can also make sure to connect the wires of the right colours to their appropriate terminals.  

Testing the light installation

After finishing the job, your light installation specialist puts the power back on and tests the light. They can switch the light on and off several times, then leave it on for a few minutes to watch for any unusual behaviour. Should the newly installed lights flicker, go out or not work as intended, your light installation expert shuts off the power and checks each component of the lighting to find the source of the problem. They repeat this process until the light works without any issues. 

Recent Light Installation tasks in South East Perth

Nudge bar and Light Installation

$100

Wattle Grove WA 6107, Australia

2nd Sep 2026

I want someone to fit my nudge bar and light on my tank 300 Ultra Diesel.

Light install

$150

Byford WA 6122, Australia

31st Aug 2026

Install a pendant light above island bench

Very happy with the service and I would recommend John for any electrical work. Thankyou

Stedi light installation

$100

Thornlie WA 6108, Australia

24th Aug 2026

The lights are already on the bull bar. I just need to run the wiring and fit the switch inside the cab.”

Ceiling Fans and Light Installation

$500

Como WA 6152, Australia

21st Aug 2026

Needing someone to complete: 3x Ceiling Fan Installations - will be fitted to replace existing light. Fan is remote controlled. Will be installed to 3 bedrooms upstairs - gyprock ceiling. 2x Ceiling Downlight Replacements - will be fitted to replace existing light panel - concrete ceiling in living area. I’ve already purchased the ceiling fans and downlights. Happy to answer and questions you may have. Open to all quotes.

Great service and timing!

Pendant light installation

$100

Whitby WA 6123, Australia

10th Aug 2026

I need to replace my standard dining table light to a pendant (supplied).

Good block....awesome work.

Downlight Installation

$55

High Wycombe WA, Australia

20th Mar 2026

Installation of downlights across the house (3x2 and single storey) Budget is $55 per light. 25-30 lights

New light install

$200

Como WA, Australia

12th Feb 2026

We need a new light fixture installed in a bedroom in Como. It’s a ceiling mounted light and there’s existing power to the location

2 Power point plugs and one light installation

$300

Wilson WA, Australia

7th Dec 2025

I need to put 2 power points in kitchen and theatre and also one light . It’s 4+2 single story home. Based in Wilson suburb

Skylight installation in raked ceiling

$300

Bedfordale WA 6112, Australia

29th Nov 2025

I need 2 skylights installed in a raked ceiling, fairly simple job

Tube light installation

$70

Gosnells WA 6110, Australia

15th Nov 2025

Hi guys, Just looking to get one Tube light installed. Only registered electrician. Attached is the photo. Thank you

Fan and light installation

$40

Lynwood WA, Australia

12th Oct 2025

To install pendulum light

Downlight Installation

$650

East Victoria Park WA, Australia

6th Sep 2025

Remove existing fittings • Remove 5 x light battens. Install new downlights • Install 15 x supplied 90 mm LED downlights (cut-out size: 92 mm). • Position lights in nominated locations. • Ensure all downlights are square to the room and aligned with each other. • Of the 15: • - 4 downlights will replace each of 3 existing battens. • - 3 downlights will replace 2 existing battens. Testing & setup • Test each light to confirm correct operation. • Work with the owner to connect lights to the app (the owner will have pre-tested and pre-connected them). Clean-up • Remove and dispose of all waste and packaging from the work area. • Leave the site tidy on completion. Site details • Property is a single-storey home with no ceiling insulation. • Work can be completed on any day of the week, including weekends. Supply of electrical safety certificate is required

Light installation

$150

Cannington WA, Australia

28th Jun 2025

I want to change my light fixture. The new fixture is about the same size as the current one.

Down light install

$100

Beckenham WA 6107, Australia

6th May 2025

Need to install a new down light on the ceiling , a new one not a replacement

really good service

Downlight installation, power plug install and wall TV Mounting

$1,000

Piara Waters WA, Australia

23rd Mar 2025

Hi, I’m looking for a quote for the following work: • Downlight installation – Approx. 30 lights (possibly a few more) in a single-story house. Lights and back plugs will be provided. • PowerPoint installation – 2 points on a double brick wall. • TV wall mounting – 75-inch TV to be mounted on a double brick wall. Cabling needs to be concealed so no wires are visible. TV bracket will be provided.

Excellent job and excellent services Really will recommend him For any kind of electrical and comms works

Mazda CX5 tail light installation

$100

Rossmoyne WA, Australia

10th Feb 2025

Mazda CX5 tail light installation, Parts has been arrived from online purchase, need professional installation.

Ceiling light installation

$190

Southern River WA, Australia

15th Jan 2025

Replace existing light with a led ceiling light

Split system installed, fan with light & light installed

$1,250

Byford WA, Australia

1st Dec 2024

I need a Split system installed on an internal wall, there's 5 meters to outside wall. Also a fan with light installed where there is already a light, and a pendant light fitted to replace an existing one. I have air-con, fan and light

LED Light Installation

$35

Queens Park WA, Australia

27th Oct 2024

1.LED Light Installation throughout the home, estimated about 20. 2. New power points about 5 to finalise after initial check.