Find trusted local electricians in Blacktown

I’m building new tv unit, I need new 1 extra power point near tv unit.

The power point board has broken off the wall. The wires are still in tact. I have a solar battery so that needs to be turned off correctly to make sure no power when replacing the board

Hi, I’m looking for a licensed electrician to fit three pendant lights in my kitchen. The wiring and ceiling points are already in place — the lights just need to be installed (no new wiring required). I also need a bathroom exhaust fan light globe replaced at the same time. The pendants are standard ceiling-mounted with chain (I already have the lights). I have low ceilings. Located in Grantham Farm. Could you please provide a total price including call-out and labour, and your earliest availability? Thank you.

Hi, I need an electrician to fix: * Security Cameras - they are already installed but not working - HikVision * Home Video door bell not working - HikVision * Security Alarm - wrong code entered, need to be recoded * Install a ceiling fan

3 Led down lights not working. Doesn’t seem to be a light fault as we tried replacing the lights but it is still not functional. May be a light holder issue as all other lights in the ceiling working well.

Replace existing switch boards with new switch boards Fan Regulators - 5 Dual switches - 4 Single switches - 5 Quadruple switches - 2

Looking for a licensed and insured electrician to install a 7kW single-phase EV charger at my home in Marsden Park. The Job: Charger: I already have the wall unit (it is a 7kW Zeekr charger). Location: The charger needs to be wall-mounted inside the garage. The Nuance: The main switchboard is located at the front of the house and garage is at the back of the property detached from main dwelling by a backyard. You will need to run a dedicated circuit from the main board (sapprox. 20-25m). I also have solar installation on the roof. Requirements: You will need to supply all necessary materials, including: Approximately [Estimate, e.g., 20-245m] metres of 6mm² or 10mm² cabling (please confirm based on voltage drop). A dedicated 32A/40A RCBO (Type A or Type B as per the charger's specs). Conduit and isolation switch near the charger as per AS/NZS 3000 standards. A Certificate of Electrical Compliance (CoC) upon completion. About the House: Modern build in Marsden Park with easy switchboard access. Double-storey with attic access on the second storey. 3-phase power supply at the property, but this installation is for a single-phase 7kW unit.

Bar light installed on bullbar on 2025 new car..QUOTE ME

I need an electrician to install the pendent light to the kitchen. Already power connection is there

Hi, need an electrician to replace 2 light switches which are a little worn out. Its a pretty simple and straightforward job for a qualified electrician. Please note I already have the replacement switches. 1x single gang and 1x dual gang. This is just for installation.

Hi, I need a qualified air-conditioning technician to diagnose and repair a Daikin split-system showing a C1 error. From what I’ve been advised, this usually relates to the indoor fan motor / sensor / auto-clean mechanism not operating correctly.

One of the MCB is faulty and needs repair to replace it

Need an electrician to fix a kitchen ceiling tube light terminal, already removed and bought a deta tube light as shown in pics, simple job

I need 5 downlights to be replaced,as they don't work. Also 4 outdoor lights

The downlight in my bathroom is flickering Not sure if the bulb needs to be changed or if it’s something to do with the wiring

Want new oyster light and replace old one

Need to replace existing down lights between.5 to around 20. Pls confirm per downlight replacement cost

Replace ring camera as the current one is not working properly

2.7kW Reverse Cycle 687x420x62mm Window Vertical Opening

Hello, We are looking for a licensed electrician to attend our retail store, in Westfield Mount Druitt, to diagnose and repair a faulty track light. The Issue: One of the black, cylindrical track spotlights on our main sales floor is flashing/flickering. This is a potential safety concern and is very disruptive to the store environment. The Job: The task is to find the cause of the flashing and perform the necessary repair to ensure stable, constant light. The scope of work includes: 1. Safely accessing the high ceiling track system (a suitable ladder is required). 2. Diagnosing the cause of the fault (likely a failed LED unit or a faulty driver). 3. Supplying and installing a new, like-for-like replacement track light fitting. 4. The required model is a Sydney Vision Lighting, ZOOM TRACK 1 CIRCUIT, Code: ZOO1533B-1, 15W 3000K. Please see the attached photo of the product label for all specifications. 5. Testing the new light to confirm it is fully operational and the flashing has stopped. Please note: The successful contractor MUST be able to source and supply the specific light fitting. The cost for this item must be included in your final offer. Requirements: - MUST be a fully licensed and insured NSW Electrician. - You must have your own tools, including an appropriate A-frame ladder suitable for a high commercial ceiling. - Experience with diagnosing faults in commercial LED track lighting systems is essential. Location & Timing: Location: Westfield Mt. Druitt Cnr Carlisle Avenue & Luxford Road. Mt Druitt NSW 2770 (exact location will be provided once the task is assigned). When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include all labour costs AND the cost of supplying the one specified track light fitting. Thank you.