Find trusted local electricians in Seven Hills NSW

I have my electric hotwater system running on dedicated Circuit CL1. I wanted to add a changeover switch to switch between dedicated Circuit (CL1) and normal Ckt along with a Shelly's EM controller. The aim is to make use of solar that i generate for HWS. I can supply the parts for the job (the switch and controller). Connection is such that NC is on Dedicated Ckt and NO on Normal Ckt Please refer to diagram for details. NOTE : Am not sure about the budget involved for the job and requsting quotes with and without parts please.

Provide and install Netting (guard) around solar panels, we have 25 panels

I got all the cables draw need to install down lights, switch points, Rangehood and other appliances connection as this is a new extension of ten house

I need a licensed Level 2 Accredited Service Provider (ASP) to install a fuse/work on the switchboard in my townhouse meter box (please see attached photo). ​Because this involves the main meter/switchboard setup, it requires a certified Level 2 electrician rather than a standard electrician. Please offer your fixed price or call-out/hourly rates to complete this safely. Thanks!

Looking for a licensed electrician to quote for: 32 × SAL S9071TC LED downlights – 92mm cut-out, supplied by you 4 × quality dimmers – supplied by you 1 × quality outdoor sensor light with indoor switch – supplied by you 1 × modern light replacement – light supplied by me (refer to 3rd photo) Remove existing lights No painting required Please provide a detailed quote including labour, materials, removal and workmanship. SAL product reference: https://www.sal.net.au/products/interior-led-lighting/led-downlights/P

Existing Light working but want to replace with a Security Light

Solar panel netting single story

Need an electrician to fix 40m long led strip on large church wall, scaffolding available

Switchboard upgrade Install timer for CL2 so that water heater works on inverter.

Looking for an electrician to relocate some electrical wiring approximately 1.3 metres to the right. The wires are currentlyabove the tiles (see photo). Need them moved neatly and safely to the right for a renovation. - Job is straightforward - Quick job

My uncle’s bathroom light switch has stopped working and the light will no longer turn on. Looking for a licensed and insured electrician to: * Diagnose the cause of the fault * Confirm whether the issue is the switch, wiring, fitting, bulb, or something else * Purchase any required replacement parts (I will reimburse reasonable material costs with receipt) * Complete the repair and test that everything is working correctly Requirements: * Current electrical licence * Public liability insurance * Own tools * Able to provide advice if additional work is required Please include: * Your licence details * Your availability * Whether your quote includes diagnosis and labour only, or labour plus minor replacement parts I’m looking for a practical, cost-effective repair rather than a full replacement unless necessary. He is retired, doesn’t drive and is not well at the moment so can’t organise this himself and i’m too far away to assist. Flexible on time of day.

Replace 3 phase 20Amp socket with 2 x 20Amp single phase round pin sockets, isolating switch and RCBO in an industrial warehouse. See pictures for reference. Work can be completed any time day or evening. Must be appropriately licenced to undertake the task.

I’m looking for a licensed electrician to replace approximately 10 old switches in a 2-bedroom house in [seven hills ]. The Job: Quantity: 10 switches total. Types: A mix of standard on/off, dimmers, and two-way switches. House: 2-bedroom, single-storey. Easy access. Requirements: Must be a Licensed Electrician. Looking for a clean, reliable pro who can get this done efficiently. Payment: Cash on completion. Please send through your total quote for the job.

Need a licensed electrician to add basic power, on and off switch and lighting to a new backyard shed (we will supply the light, mainly needs to be installed) , Also the electrical circuit power box is 7-8m away Need weather proof material, Happy to negotiate , happy to organise on a day your free

Looking for a qualified electrician to check and fix a few power sockets (plug points) that have stopped working in my home. Details: • A couple of wall sockets are not providing power • Other areas of the house appear to have electricity • Likely a minor electrical issue, but needs inspection ONLY Requirements: • Licensed electrician • Own tools and equipment • Able to diagnose the issue

**Electrician Required – Install Single-Phase Sub-Meter (Labour Only)** Looking for an electrician to install a single-phase sub-meter to monitor granny flat electricity usage. 📍 Location: Single floor, Easy access, parking available The granny flat already has an existing sub-board installed with: • RCDs and circuit breakers • Dedicated supply from the main switchboard This is a very small job. All parts are supplied and pre-wired. Scope of Work • Install weatherproof meter box on the opposite side of the wall behind the existing sub-board. (All undercover, No Water exposure) • Drill one hole through a timber frame wall • Re-route the existing supply through the new meter box and return it to the existing sub-board. No new circuits or cable runs required. Parts Supplied (Pre-wired) • IP65 weatherproof distribution box • RCBO • Wi-Fi energy meter • RS485 Wi-Fi gateway • GPO outlet What I Need Labour-only quote. • Estimated job time ~45–60 minutes • Licensed electrician preferred Looking for someone who may be able to fit this in between jobs or during a nearby call-out.

Check smoke alarm in my Granny flat and issue certificate for rental agent.

One of the MCB is faulty and needs repair to replace it

Need to replace existing nbn cable. We had a nbn technician visit the premises but apparently company policy restricts them from going under houses they were kind enough to provide the cable just need someone to connect it.

Hi, 2 LED downlights are not working. The current LED downlight model is Atom Lighting AT9012WH (13 W / constant current 350 mA). This is not plugging model it is hardwired model. but happy to be replaced with plug model for both of them if that is easy Thanks