Find trusted local electricians in Marsden Park

Hello, I want to get a 15a power point added in my backyard to support hot tub. I need a new power point created for 15A tubing from switch board to backyard which is approximately 20 meters conduit

Hi I have 1 x 2 seater and a 1 x 1 seater theatre recliners My 2 seater stop working, i have swapped the power packs but still doesnt work. Looking for someone to fix it or recable it.

Need Electrician to Install 2 Floodlights Looking for a licensed electrician to install 2 outdoor floodlights at my house. Scope of work: * Install and connect 2 floodlights * Ensure wiring is safe and compliant * Test lights after installation I already have the floodlights ready. Please bring standard tools and any small installation accessories if needed.

Due to some reason , I had to remove the solar panels along with the mounting frame. They now need to be reinstalled on the roof.

chandeliers need installed

I would like warm LED strip lighting installed under my upper kitchen cabinets. I want no visible wires, and I want it to look fully built-in. The lights should be soft, continuous (no dots), and ideally connected to a switch. • Colour: Warm white (3000K) • Type: COB LED strip (no visible dots) • Finish: Aluminium channel with diffuser • Placement: Front edge under cabinet (not at the back) • Wiring: Fully concealed

Need help with moving of modem from garage to inside the house

Replace outside security light. Install dining table lights

Need to remove solar panel and reinstalling back after roofing is done

Deck spot light is installed and with control box as they are colour changing ones but needs to be connected to the best electrical outlet

Require an electrician to: - Supply and install new double GPO (Iconic Vivid White) - Move Dyson charging dock from one wall to another near new GPO

As stated power point installed under stairs back to back with existing one

Need an electrician to run the or install the light in the kitchen. I have already purchased a light thank you.

I want someone to put a chandelier in my kitchen small chandelier Job easy job

1. Solar Panel Installation Supply and install compliant mounting/racking system Securely mount all solar panels on roof (tile or metal – to be confirmed) Ensure waterproofing and roof penetrations are sealed correctly Panels to be installed as per Australian Standards (AS/NZS 5033) 2. Inverter Installation Mount inverter in a compliant and ventilated location Install DC isolators (roof and inverter side if required) Install AC isolator Label all components correctly 3. Electrical Works & Wiring DC cabling from panels to inverter AC connection from inverter to main switchboard Install solar main switch Earthing and bonding as per standards Ensure compliance with AS/NZS 3000 (Wiring Rules) 4. Grid Connection & Commissioning Test system performance and safety Configure inverter settings System commissioning and compliance checks Assist with grid connection requirements if needed Provide Certificate of Electrical Safety / Compliance Certificate

Hello. 2 jobs to be done. 1) Replacement of exsisting two outdoor lights with two new (Philips Light) lights. Just switch over to new lights, everything else is working switch connections etc. I will supply the two lights of Philips lights (as per the picture). These are at the front door entrance. normal height. 2) Install two sets of string lights ( Eufy String lights picture attached) on the Eaves - under the roofing - on the Eaves with one screw each for each small light. Two sets of strings 30 metres each of to be fixed on two and half sides of the house. Each set has 60 small lights in each string. This is standard double storey house at Marsden Park. Pictures attached of eaves portion. I will supply the two sets of Eufy lights.

Looking for a licensed and insured electrician to install a 7kW single-phase EV charger at my home in Marsden Park. The Job: Charger: I already have the wall unit (it is a 7kW Zeekr charger). Location: The charger needs to be wall-mounted inside the garage. The Nuance: The main switchboard is located at the front of the house and garage is at the back of the property detached from main dwelling by a backyard. You will need to run a dedicated circuit from the main board (sapprox. 20-25m). I also have solar installation on the roof. Requirements: You will need to supply all necessary materials, including: Approximately [Estimate, e.g., 20-245m] metres of 6mm² or 10mm² cabling (please confirm based on voltage drop). A dedicated 32A/40A RCBO (Type A or Type B as per the charger's specs). Conduit and isolation switch near the charger as per AS/NZS 3000 standards. A Certificate of Electrical Compliance (CoC) upon completion. About the House: Modern build in Marsden Park with easy switchboard access. Double-storey with attic access on the second storey. 3-phase power supply at the property, but this installation is for a single-phase 7kW unit.

I’m looking for a licenced electrician to help with a couple of items: * solar inverter (not working), * speaker cables (find them in the ceiling and put termination plates), * downlight replacement

Installing two fans and eight to twelve downlight. Single storey building.

Hi, I am looking solar installer for my company as a supervisor.