Find local ev charger installers in Blacktown

EV Wall Charger 32amp directly behind the switchboard wall. Separate circuit breaker and wall switch required. I'm not sure if this is single or 3 phase. To be installed next to the 15amp outlet in the photo provided.

I have a brand new Geely 7kW EV wall charger that needs installing. Unit is supplied — still boxed with bracket and manual. Mounting spot is either on the brick wall right beside the meter box, outdoors under the eaves or on the opposite wall inside garage. Very short cable run. Happy to take your advice on positioning. House built 2022. Board is modern with RCBOs already fitted and appears to be three phase. Photos of the board and the wall attached. What's needed: - Mount the charger - Dedicated 32A circuit with RCD protection - Test and commission - Certificate of Compliance (CCEW) Make your best offer, please include your NSW electrical licence number and confirm the price covers all materials and the certificate.

I would like to get Fast EV charger installed in my garage. I have already got the charger. My house has solar and Tesla powerball 3 battery installed. My house is supplied with 3 phase electricity. In the pic the meter is on the left of the house.

New Tesla home charger bought already. I need to install it inside my garage

Need licenced electrician to install Tesla EV charger to single phase fuse box. Installation will be approximately 15m from fuse box.

Install new EV charger for car.

Tesla charger needs to be installed in the garage. Charger available, only needs to be installed.

Need to install Tesla Gen 3 charger. Single phase supply at home. Install Charger in garage. About 10m cable length. Add 40A dedicated circuit to DB. Charger already bought. MCB, cables, conduits to be supplied. Wall penetration from DB outside to garage already available. No need to go through roof.

I have a brand new 7kW EV wall charger that needs installing. Unit is supplied — still boxed with bracket and manual. Mounting spot is the brick wall right beside the meter box, outdoors under the eaves. Very short cable run. House built 2022. Board is modern with RCBOs already fitted and appears to be three phase. Photos of the board and the wall attached. What's needed: - Mount the charger - Dedicated 32A circuit with RCD protection - Test and commission - Certificate of Compliance (CCEW) Make your best offer, please include your NSW electrical licence number and confirm the price covers all materials and the certificate.

Looking for a licensed electrician with experience installing residential EV chargers. We need someone to inspect our home, assess the existing electrical setup, and recommend a suitable 7kW solar-smart EV charger for our new Jaecoo J5 EV. We'd like advice on a charger we can purchase ourselves (preferably from Bunnings), and then have it professionally installed. Please only approach if you have experience with EV charger installations and can provide a quote for the inspection and installation. Thanks

Need EV charger instead

I need a Tesla charger to be installed in my garage

Need 7KW EV charger installed. Single Phase. New cable to be run from switch board to garage (15-20m). New RCB will be required for new circuit.

I'm looking for a licensed electrician to install a BYD EV wall charger at my home in Seven Hills, NSW. Job details: Single-phase residential property. Approx. 10m from the switchboard to the charger location. Wall-mounted charger outside the garage.

I am looking for a licensed electrician to install a Tesla Wall Connector (Gen 3) at my home. Requirements: • Valid Australian electrical licence (NSW). • Experience installing EV chargers, preferably Tesla Wall Connectors. • Install, test, and commission the charger according to Australian standards (AS/NZS 3000). • Provide a Certificate of Compliance for Electrical Work (CCEW) via the BCNSW eCert portal upon completion. Details: • Tesla Wall Connector already purchased and available on site. • Single-phase power available. • Charger to be installed inside the garage. • Cable needs to pass through the wall from outside to inside, right behind the power board but on the other side of the wall (see attached photos). • Please provide a quote including labour costs and all required materials (cabling, conduit, isolator switch, Type A RCD, circuit protection, etc.). Budget: $300 (negotiable depending on scope — happy to discuss if additional materials/labour are needed)

I'll be supplying the Tesla Wall Connector. Property Details: New house (built 2021) Single residential home Existing modern switchboard (no known issues) Switchboard and garage are on opposite sides of the house Cabling will need to run through/around the property — roof cavity or external conduit may be required Job Scope: Install Tesla Wall Connector (Gen 3) Mount charger on garage wall Run cabling from switchboard to garage (opposite sides of house) Confirm best cable route on site (roof cavity / external conduit / underground) Check load capacity (no major upgrades expected, but please confirm) Provide NSW Certificate of Compliance Requirements: NSW licensed electrician (mandatory) Experience with EV chargers / Tesla installations preferred Must comply with AS/NZS electrical standards Provide insurance details if requested Timing: Flexible, preferably within the next few days Please include in your quote: Licence number EV charger installation experience Proposed cable route Total fixed price (preferred) Availability

I need certified electrician to install Dewalt EV charger in Garage. (3m away main switch board). I already bought the Dewalt EV charger and need someone to install it on

Looking for a provider to supply and install an EV charger for a single-phase, single-story home. The property includes a FoX battery and inverter linked to a single-phase residential supply. The site is about 15-20 meters from the meter box. The offer covers Labor and parts only; the EV charger will be purchased separately via Airtasker. Update: Photos have been added. The EV charger needs to be installed on the marked outer wall, and a switch must be installed in the garage to control the EV charger on/off.

I have a purchased FOX EV CHARGER NEED TO INSTALL

Electrician to - 2 fan disconnect from parklea, put a cap on and install both in north kellyville home - disconnect tesla charger and install at new place where connection is already in place. Photos attached