Find trusted local electricians in North West Perth

9 x Supply and replacement of existing down light replacement with LED type 90 mm cut out size 1 x Bathroom exhaust fan supply and replace Double storey house

Replace three standard led down lights to a common area ceiling I have replacements myself however they have electric plugs.

I need a power point installed in my kitchen where the sink cupboard will go, and the fridge power point raised up 10cm

A room in a Granny flat has the light not working, looked at trip switch and no issue there, We think it needs re wiring as I’m not sure if the flat has been an import

GPO wired and oven needs hard wired. Cable in location

We’re upgrading our internet connection from fibre-to-the-node to fibre-to-the-premises. A technician attended to complete the installation but was unable to finish the job, as he couldn’t run the cable from the Telstra box at the front of the house through the roof cavity and down to the internal internet port. He mentioned that he’s not permitted to enter the roof cavity, but an electrician would be able to complete this part. He left the NBN cable here and advised me to contact an electrician. The main challenge is that the roof pitch is quite low, so roof tiles will need to be removed for access. There are also solar panels on the roof and ducted air conditioning in the roof cavity. I’ve attached images of the external box, the internal port location, and an aerial view of the house showing where the cable needs to be run through the roof. Im flexible with cost.

Old oven requires disconnecting asap

Need 1 split system aircon installed back to back. Remove the old one and dispose as well

Description: I need a licensed electrician to ensure my property meets legal compliance requirements for sale in WA. The job involves: • Installing hardwired smoke detectors (as required by law) • Ensuring there are two RCDs protecting all power points and lighting sub-circuits • Providing a compliance certificate or written confirmation that the property meets current regulations Please note: I currently don’t have any smoke alarms installed, so the quote should include both the supply of smoke alarm(s) and installation.

Must source the external ceiling fans and we need to approve before purchasing to ensure quality is acceptable. Cost of fans will be on top of task price. Must ensure fans can be controlled from existing control 4 switch pad.

Outdoor plug point with 2 sockets to be replaced like for like Current point has one of the switches not functioning well

To screw in smoke alarms to the ceiling, smoke alarms will be provided

2 led bathroom mirror needs to install and connect the led light to the PowerPoint

I’m looking for a sparky to replace 20 existing downlights under the eaves. They’re the older style ones and a few have started to fail. Current cut-out: about 6.2cm New LED lights (pictured): 90–100mm Need the old ones removed, holes slightly enlarged, and new ones fitted - already have the new lights Located in Marangaroo (single story brick and tile)

3 simple pendant light fittings (1 ceiling light fitting at a height in the balcony, 2 in the hallway) 1 outdoor sensor light to be fixed

I need one smoke alarm replaced if U can provide very happy please

I urgently need an electrical compliance certificate on a rental property before tenant moves in.

Looking to install 5 additional PowerPoints . On a single storey home. One PowerPoint is on a perimeter wall and the rest are internal.

Need to Replace old split AC unit.

Hello, We require an URGENT call-out from a qualified and licensed WA Electrician to repair a hazardous light switch at our retail store, in Westfield Innaloo. The Issue: This is a serious electrical and fire hazard. This morning, when a staff member went to turn on the lights, the switch visibly sparked. There are now scorch marks and discoloration on the switch plate, as shown in the photos. The switch is a potential shock and fire risk and cannot be used. The Job: The task is to attend the site urgently to make the switch safe and functional. The scope of work includes: 1. Safely isolating power to the circuit. 2. Diagnosing the cause of the spark (e.g., faulty switch, loose wiring). 3. Supplying and installing a new, standard white push-button switch mechanism and faceplate. 4. Thoroughly testing the new switch and the circuit to ensure they are safe and operating correctly. 5. Providing a certificate of electrical safety for the work completed. Requirements: - MUST be a fully licensed and insured WA Electrician. - You must have your own diagnostic tools and carry standard replacement parts (e.g., standard switches) to ensure a single-visit repair. - MUST provide a certificate of electrical safety upon completion. Location & Timing: Location: Westfield Innaloo, Ellen Stirling Blvd, Innaloo, WA 6018 (exact location will be provided once the task is assigned). When: URGENT - THIS REPAIR MUST BE COMPLETED BEFORE THE DAY AFTER TOMORROW, [18th September]. Please only make an offer if you can commit to completing the job within this specific timeframe. Please provide a comprehensive quote for the complete job. Your offer should include your call-out fee, all labour, and the cost of supplying the new switch. Thank you.