Find trusted local electricians in Camberwell VIC

Description: I need a licensed electrician to supply and install two new, black, standard double power points (GPOs) in my garage, as marked in blue. Access: Easy access to the walls/floor/ceiling. Please provide a quote that includes GST for Labor and parts.

Electrician to install new ceiling hung Foxydry pro laundry clothes liner. Please only those electrician apply who has installed it previously. Looking at getting it done after 20th May 2016.

Need registered electrician to replace one basic plastic ceiling lights (as photo) one heavy pendant (as photo). Replacement lights from IKEA pendants ( as photo)

I would like to swap from gas cooktop to an electric cooktop.

Task Description: I need a Licensed Electrician to repair a Roband commercial deep fryer at my restaurant in Melbourne. The issues are: • There was an electrical short at the back of the unit. • The main power lead connected to the heating element/control box is damaged/broken. • The unit tripped the circuit breaker and requires a safety check.

Description: I need a licensed electrician to supply and install three (3) new, black, standard double power points (GPOs) in my home. Location: Camberwell ; Structure: Single-story Requirement: Must be a qualified electrician and provide an Electrical Safety Certificate (ESC) upon completion. Specifics: I am looking for a neat, professional installation. The power points will be installed on internal walls. Access: Easy access to the walls/floor/ceiling. Please provide a quote that includes GST for Labor and parts.

We have 4m ceilings and a hard wired voltex smoke alarm is going off. We think it’s either low battery we have spares. Or dust, insects. Needs to be taken off, vacuumed, battery replaced and put back.

17 Solar panels. JA540 Deep Blue 5kw Inverter SLA-ESS-S1-20kwh 18.36kw batter. SLA-ESS-S1-20Kh Installer must be licensed to install battery and solar panels

Electrician required for 3 small tasks: (1) replace a broken double powerpoint shown in photo (2) replace dimmable ceiling down light (please supply the downlight bulb as well as shown in photo) (3) Replace 2 outdoor flood lights that are broken (please supply these as well they are shown in photo, not sure if the bulb is broken or flood light) Please make your quote inclusive of the replacement parts and all airtasker fees and labour

Wire up an AquaMax 250 & issue certificate of electrical safety

i got a main store front led signage which needs to be installed and a led light box which need to be replaced with a new one!! already have both the things for - front signage need to drill and put heavy screw and just hang it on the screw . for light box- need to replace it and connect both with electricity, already connection available

Both lights in Laundry out, no others, replaced one bulb ?wiring issue.

I have an old Brooks hardwired smoke detector that continuously beeps and goes off I need it replaced and would prefer a battery operated simple smoke alarm. I need someone to disconnect the existing one and replaced with a battery powered non hard wired smoke alarm.

Switch broke on my old electrical socket. Need it replaced asap

I need a licensed electrician to safely disconnect and cap off electrical points so I can remove an old cabinet unit. Details: • Commercial shop • Multiple power points above and below bench ( 6 power point and 3 tuble light) • No new wiring required • Just need all power isolated, capped, and made safe • Power can be left inside wall / junction box as per standards Important: • This is disconnection only, not installation • I will remove the cabinet after electrician completes work

The reverse cycling system needs to be reviewed. Preference is job to be reviewed before accepting.

We need an electrician to help us with removing an old conditioner

Looking for a reliable electrician to replace a bathroom exhaust fan that conked out after 10 years (see photo), and change 3 light globes in a bedroom. Let me know which fan I should buy from Bunnings and I'll get it before your arrival for installation.

1. Install one new gimble downlight in ceiling. Wiring is currently in the wall directly below the site of new downlight. As the house is 2 stories and the new light is being installed on the lower ground there will be no roof access. Should be easy to pull wire up. 2. Decommission 3 power points. 3. Decommission 1 data point. 4. Move one power point to new location on same wall but further towards the floor (app 50cm down) 5. Replace LED strip lighting that has some missing lights. New lights provided.

Need a ceiling pendant light install centred to the dining table. Expecting dining table delivery on 3/11 I recently had an electrician install some outdoor lights on the outdoor deck (adjacent to dining) and had some holes cut up in the ceiling. The holes provide access to run ceiling cables and into the walls to link up to the switches. Currently two gang switch (pictured before the recent work done) which needs to be further upgraded to three-gang. Offer needs to include the new switches as well Lamp - see as pictured Three way switch - as pictured