Find a reliable computer and IT professional in QLD

Optus Modem is not getting any fttn connection through the one and only telephone socket in the house

My computer liquid cooler has failed I think, and the PC will no longer boot up past the fail screen, forcing it to go into the setup screen when I press F1. I think it is trying to protect the motherboard from overheating which makes sense. The fans are all spinning, but last night the ones at the front were spinning at 1000rpm, leading me to think it's pushing the front fan into overdrive to compensate for the AIO not working. The AIO liquid cooler showed no activity in the F1 boot up screen leading me to think it has failed and needs to be replaced. Job is for someone to come out this Saturday with the correct or better quality part, and replace the damaged part or remove the liquid cooling system, and install a noctua nh-d15 or similar quality fan cooler. My PC knowledge isn't super extensive but that's the recommendation I was given from our IT guys at work. current specs are: -Intel Core i7 7700K processor -Corsair Hydro Series H100i Liquid CPU Cooler -ASUS Prime Z270-A Motherboard -MSI RTX GeForce 3060 Gaming X 12GB -16GB Corsair Vengeance memory -Intel 600P Series 256GB M.2 SSD -Seagate 7200RPM 2TB hard drive -Phanteks Eclipse P400S Tempered Glass Glacier White -Be Quiet! Pure Power 9 600W Power Supply Note: quote to include provided parts.

Can’t get the printer icon

Run CAT6 ethernet cable from existing service cabinet on surface mounted conduit and then drill through to adjacent room. In the adjacent room it should terminate with an ethernet wall plate.

Transfer parts to new PC

We have three computers that need to be set up properly with OneDrive - also a tutorial and help navigating OneDrive Computers are 1 x MAC 1 x ACER 1 x HP

Just moved into new building with lynham network. I have lightening broadband account opened and have a d-link router. I need someone on site to get it working for me.

Hi there, I have a new internet connection that I have ordered for our Hilton service apartments. I just need the router picked up from the Auspost on Cavill Avenue then delivered to the apartment. The router will just need to be plugged in (no additional set-up required). Thanks

Task Description: Looking for an experienced data cabler to run, terminate, and test Cat 6A shielded cabling on an active job site. Scope: Run and terminate approximately 25 additional Cat 6A shielded cables through designated cable paths (ceiling space/conduit — access details provided on site) Terminate approximately 70 Cat 6A cable ends with RJ45 connectors Maintain shield continuity throughout — correct grounding/bonding on all shielded terminations, no exposed or compromised shielding Wire to T568B standard throughout Test every terminated cable for continuity and signal performance — provide test results on completion Materials: Cat 6A shielded cable and RJ45 plugs will be supplied on site by the IT Project Manager You'll need to bring your own tools, equipment and tester (see below) Requirements: Proven experience with shielded cabling specifically  Own appropriate cable tester  Own termination tools (punch-down, crimpers, cable strippers, et

I need someone to perform a site audit regarding an existing UPS system. A checklist will be provided to complete. Will also need to take photos on site. Our UPS engineer will provide support over the phone.

Title: Complete Gaming PC Build + BIOS Update & Offline Windows Setup Description: I need an experienced PC technician to completely assemble a custom gaming computer from scratch in Capalaba. My Components: * Case: Thermaltake View 170 ARGB (White Edition) * CPU: AMD Ryzen 5 5600X * GPU: XFX Swift AMD Radeon RX 9060 XT 16GB * Motherboard: ASUS PRIME B550M-A WIFI II (Micro-ATX) * RAM: 16GB Kingston Fury DDR4 3600MHz * Storage: Silicon Power P34A60 512GB NVMe SSD * PSU: MSI MAG A650BN 650W Required Tech Steps: 1. Physical Assembly: Safely install all hardware components into the Thermaltake case and route the cables cleanly. 2. BIOS Firmware Update: Because these boards can ship with old software, it might hit a black screen on startup. You must bring an older AM4 test CPU to boot the board and flash it to the latest ASUS BIOS version if it doesn't post out of the box. 3. RAM Optimization: Enter the BIOS and turn on D.O.C.P. / XMP to uncap the Kingston Fury memory so it runs at its full 3600MHz speed stably. 4. Software Setup: Install a clean, fresh copy of Windows 11 onto my 512GB NVMe SSD. 5. Offline Driver Installation: CRITICAL NOTE: There is no active Wi-Fi or internet at the build location. You must pre-download the official ASUS wireless, Bluetooth, and latest BIOS drivers onto a USB drive before arriving, so they can be installed completely offline. This ensures I can connect to my phone hotspot the second you finish. The build must be completed at my location so I can see it working on my monitor before funds are released. Thanks!

I’m looking for an experienced Google Home/Google Nest technician to help troubleshoot and set up my smart home devices. What’s happening I’ve spent several hours trying to get my Google Home devices working and have attempted multiple troubleshooting steps without success. The devices are not connecting or setting up correctly through the Google Home app. Looking for someone who: * Has strong experience with Google Home and Google Nest devices. * Is confident troubleshooting setup, Wi-Fi and connectivity issues. * Can identify and resolve configuration problems. * Can ensure all devices are working correctly before finishing the job. What you’ll need * Experience with Google Home, Google Nest and the Google Home app. * Knowledge of Wi-Fi networks and smart home device setup. * Ability to explain what the issue was and any changes made.

Come hm have a look around the cameras and connect to our mb

Just need someone to Terminate 2x cat 6 Ethernet cable ends, so I can use them/ plug them in. I don't need wall plates, I've got dust cover wall plates I'll just bring the cable through Can be done anytime Located Brighton 4017

Simple task: the Ethernet cable port has fallen inside the wall so the Ethernet cable isn't able to be plugged in. Need someone with the right tools to take it out and plug it again.

I’ve decided to switch my PC from Intel to AMD. I have a new motherboard, cpu, and ram and would like it all installed.

I have bought a pair of Razer Blackshark V2 X headphones for the first time for gaming. I cannot get them to work either audio nor microphone. I have Asus Prime Z790-A wifi motherboard and front connector is on Hyte Y40 case. Have tried all AI suggestions with no success.

We have a new shop and need a technician to jumper our NBN service in the Coomera shopping centre MDF room. We have the NBN tagging on hand. Induction and Telco access form is required to sign from the shopping centre (we will send you the links).

Set up the modem and switch, and patch all data points to the switch. Connect 3 mini computers and 3 monitors (including 2 with monitor arms). Connect 1 printer and 2 EFTPOS machines. Set up the CCTV NVR system. Connect 3 TV set-top boxes. Connect 1 IP phone. Handle all other IT-related items as required. Please refer to the photos for a detailed job description. This is expected to be a full-day job.

-Set up system and user accounts -System updates -Connect WiFi & Printer -Configure security and antivirus software -Setup email client -Install Microsoft Office -Data transfer from current Laptop