Find experienced local carpenters in Ryde

Send me a quote, my budget doesn’t reflect final price. Need a plasterer to plaster my roof. 3.2m x 4.7m. Edges do NOT need to be perfect except for 1 edge. Very fast job, just need it to be level and flat. If you’re good i’ll get you in to finish the extra part after a week. I’ll pay for materials, tell me what you need and I’ll have it all ready for you. No clean up or sanding needed, studs already in and level.

Part of the shelf (middle section) collapsed due to weight over time. Originally it was part of a whole shelf across the length of the wardrobe (see photos attached). The collapsed section is now temporary leaning against a wall as shown in the photo. I need a quote to get this done. The fallen section is over 2 m in length.

I need a cabinet maker to make a custom made timber heavy duty drawer for my van ( Renault Kangoo swb ) It will have 4 different pull out drawers and a 17mm plywood on the top, structurally Sound enough to put a heavy pallet on. You will need to anchor the framing to the floor. side walls so it doesnt move at all! All trated timbers to be used for the framing, 150 kg drawer slides for the larger ones and lighter for the smaller one. You will supply the material and install as well. Give me your quotes plz :)

Hi, We need 6 interior doors replaced and removed. We also have one sliding door and pelmet to be removed. I will provide all hardware but would like to have the doors picked up and delivered (reviews of the door say some are warped and must be viewed in person). No painting required. These are the doors: https://www.bunnings.com.au/hume-doors-timber-820-x-2040-x-35mm-internal-door-primed-mdf-flush-h1_p2012170

Stain my raw pine wood out door chairs

looking for experience installer on my U shape kitchen prefer replace by stone(Blue highlight/ Red damaged). Thank you.

I need four shelves measured and cut to size so that they can be installed in my wardrobe. The supports are already installed so it should be a simple job. In terms of materials, I am not fussy. Some kind of melamine particleboard would be fine: https://bunnings.com.au/custompine-16-x-2400-x-1200-white-carcass-matt-particleboard-mr_p0097412

Removal and disposal of old kitchen approx 8-draws approx 16 cupboards ..ply board with laminate. Stone bench top plus stone on walls. Appliances will be disconnected. Possible disposal of oven and cook-top if not sold prior. Job approx Mid May - Due date: Needs to be done on Tuesday, 26 March 2024

Construct a 3m x 1.5 metre Absco shed. Already on site. Must have experience building absolutely sheds before

I need wooden sleepers cut to size & secured to side of house & cement retaining wall to great a flat surface on the ground so I can put 2 plastic sheds on. Total width is 180cm (9 sleepers at 20cm width). Will also need to support the sleepers as the ground is not level (maybe with pavers or something similar). Please see pic.

We have one room at the back of our house where the floor has started to sink a few centimetres. This is probably due to previous pest damage (once about 15 yrs ago and again in 2021). We conducted a pest treatment in 2021. We reas It is a double brick house with brick pier subfloor. There is subfloor access under the house but at that point (the room with the problem) the crawl space may very well be inaccessible (see some pictures from a 2021 pest report). So in all likelihood the timber floor will have to be removed to get access to the damaged floor joists or bearers. We realise it is difficult to quote without knowing exactly what work is involved.

Hi, Have purchased a Absco Shed and need it built in the garage. ABSCO REGENT SHED MODEL: 23141RK

Need a wall built 3.2 metre wide 1.7 metres high and with 100m , needs to be sheeeted doesnt not need to be plastered

Hey there! We're on the lookout for someone handy with a Stanley knife to help us customize our gym mats to fit our space just right. What's the job? Measure the gym space and cut gym mats to fit the designated areas within our gym. We've got 16 mats that need slicing to perfectly match the dimensions of our gym space. Additional Info: No need for adhesive glue – these mats can just lay flat on the floor once they're cut. Tools you'll need: a trusty Stanley knife and any other cutting tools to ensure precise measurements. We're not looking for flooring installation, just someone who can help us measure and slice the mats we already have. Kind Regards Lenny - Due date: Needs to be done on Saturday, 3 February 2024

Looking to have a BOSCH SERIE | 6 60CM BUILT-UNDER DISHWASHER STAINLESS STEEL SMP66MX04A retrofitted into our kitchen. Width: 598mm Depth: 573mm Height: 815mm Current space is: Width: 580mm Depth: 560mm Height: 700mm Power point will be installed by next week. I am looking for a quote to install the plumbing and the dishwasher in the space attached in the pictures. - Due date: Flexible

Skirting boards around metal architraves were installed with a straight cut. Would like them fixed, so that they end before metal architrave and finished properly. This finish was done around three doors. - Due date: Flexible

Build x 4 timber circles that I will then apply fake plants to for a pabt wall installation I can pay for materials needed but would require you to source them (e.g bunnings) I need 1 circle at 140cm diameter, 2 at 50 cm diameter, 1 at 20cm diameter - Due date: Before Monday, 8 January 2024

Seeking quotes - We need a new timber balustrade to replace the existing non-compliant balustrade for a run of 8 stairs. It attaches to a door frame so one side of the door frame will likely need to be replaced. The outer stringer should cover the side of the treads/risers as per the second photo. We are located in Macquarie Park 2113. Ideally, this would be completed before the 27 Dec but we only get access to the property on the 22 Dec. current balustrade: https://imgur.com/PdKZdxQ what we want: https://imgur.com/TnAVjru baluster detail: https://imgur.com/a/aAHpkhZ - Due date: Flexible

Need a certified builder to replace an outdoor stairs. 1- The current stairs (8 steps) in the photo, need to be replaced. The stairs need to be painted to be similar to the exciting deck. You will need to bring your materials and also the wood that will be used to replace the stairs. The job in Marsfield. Available for onsite inspection and access after 14th Dec - Due date: Needs to be done on Sunday, 17 December 2023

Dismantle and cut wooden outdoor play equipment (wooden swing) into 1 meter blocks ready for council pick up. Please see photos attached. Approximate measurement: 255cm width (length), 210cm height and 240cm breadth (depth) - Due date: Before Monday, 13 November 2023