102 Carpenters in Perth

Hi I have a small divider wall between my kitchen and lounge of a very small one bed apartment in leederville. The wall is not even attached to the ceiling so should be easy to break down. The width is not more than 1 metre in length. I would like to drop the wall and install two small cabinets on a kitchen counter. Happy to show the place for a quote.

I need my new oven collected from Harvey Norman warehouse in Balcatta from about 1pm tomorrow (Friday 11th Nov) and delivered and installed to my house in Shenton Park. You will need to remove and dispose of the old oven and because the old oven is larger than the new one, a small shelf will need to be built so the hole is the right size to fit the new oven. Basic carpentry skills required. I can possibly arrange for my electrician to be on site during install.

Build a 3x3 DIY shed in backyard

Looking for someone handy with kits/construction, probably 4-6 hours work, help with constructing a stilla oxford shed from the kit.

Hi, I’m after a qualified handyman/carpenter to fix a wooden door frame either Wednesday, Thursday or Friday of this week. I manage a removal company and one our staff damaged the frame. I’ve attached a photo the job is in Subiaco

I'm after a hand to put up two posts, two rafters and a beam. In the attached pic, you'll see I've built an extension to the porch. I'm looking for someone to put up two 112x112 posts that will run back to the existing steel poles on the porch with 140x35 rafters. A 190x45 beam will connect the posts at height. It all needs to be notched and bolted, starting with the posts to the bearers of the extension frame I've built. The bearers aren't bang-on so itll be a bit of a fiddle to get the posts at the right distance. The two rafters running back to the steel poles will get notched onto the steel cleats that have been welded on. I've got all the wood and bolts, just need your experts! Friday or Saturday this week would be good.

Just need you to pick up a bit of timber and some l brackets and extend my desk in the office

Calling all carpenters We are looking to install a deck at 2.5x3.6m In composite and a screen of the same size. A colorbond roof must be install behind the screen to house pool equipment. I will buy materials price for labour only.

Looking for someone with the expertise to convert a commercial freezer to fridge Details below FAGOR 2 door unberbench freezer

We have several cabinets and display timber items to make over next 2 to 3 weeks. Seeing if you can assist our cabinet makers at our BALCATTA factory and start ASAP. Ideally an hourly rate may work well for both of us thanks if you can contact me soon 0414444381

I removed a section of wall and the gap in the floor needs to be fixed. Floor is light pine colour, 4 mm thick wood, tongue in groove, glued together. I am prepared to replace a ~6 sqm section if needed but not whole floor. Please come & see to quote. I am in North Perth near corner or Loftus & Vincent streets. Date and time negotiable. Cost given is only a placeholder.

We have a stainless steel bench that requires a 5cm hole drilled into it, so that we can shove wires through it. 2 second job! :)

I’m looking for quotes for timber balustrade for an external verandah. Similar to that in the first attached photo. The other photos are of the existing verandah. Also needing a gate to exit verandah at the top of the stairs and at the side.

display freezer renovation

The laminate on the cupboard has split and either needs to be repaired or new laminate needs to be applied

Fabricate 2 plinths from MDF, provided finished and smooth. Client to paint white. Hollow. Drawings can be provided to make things very clear. mm measurements Plinth 1 = 1000 (h) x 300 (d) x 1800 (w) Plinth 2= 1000 (h) x 300 (d) x 900 (w) If the price and quality is right. Following this job and extra 2 plinths may be requested. Require by Wednesday 16th Deliver to East Perth Price to include materials

I am looking for someone to measure, get a Kaboodle quote from Bunnings and, install. Pretty simple kitchen benchwork with some under counter cabinets - approximately 4m of bench/cabinetry

I have a large bird Aviary that I built. It has existing double doors, spring loaded. The boys are picking on the girls, so I need to split the Aviary in half by making a new door, which will require a frame, and a door. Can be built outside the aviary and installed for the most part. I am too busy to do this, so require a handy person who can build this for me. The existing internal door can simply be replicated... frame is made of 70x35. I have all tools, including air compressor nail gun which makes life easier. Needs to be painted prior to install so might take a couple of visits while paint dries. Will take a while, not sure how long. I will pay $40 hour for the duration of the task. I have put job up at 5 hours but if it takes longer I'll pay amend the job so you get paid for your time. Needs to be done this week. Only bid if you are all round handy and can build to tight spec, I like things to be done right! Cheers

I have a western cedar box that sits over my front balcony. The box is made from a timber frame and cedar slats. The wood hasn't been treated for 3 years and requires sanding and sealing. Only the timber facing the outside requires maintainence, with one side needing minimal repair. The timber can be sanded as is, so it doesnt need removing. You will also need a platform to work off as the structure sits on the second floor, and the driveway below is not level. A scissor lift, or scaff that can handle the slope would be ideal. There is also some painting required on the black metal. Images are attached and happy to work on an hourly or flat rate. Have set the budget for 2 days (16 hours) any gear hire I will cover on top. If you feel this will take longer than two days then please let me know.

On Friday I am having viny planking put down throughout my apartment, including on the steps of my spiral staircase. The chipboard inserts on the steps are a) disintegrating and b) slightly smaller than they should be, as they were made originally to have carpet wrapped around them. The job is to supply flooring chipboard, use it to cut 11 inserts, install them. They are to sit flush width and length wide and be 3mm lower than the top of the step in height. I think the best approach would be to make 11 pieces off-site, slightly larger than required, bring them and then plane them to fit each step. You can not rely on each step being exactly the same size. They are definitely not! URGENT JOB. Needs to be completed by the end of the day on Thursday 30th May. Attached is an image of the approx shape of the inserts, to give you a sense of it, but you will need to come and look/ measure.