Find experienced local carpenters in Broadway Nedlands

I need a qualified carpenter for roof bracing and support repairs following a building inspection report please see images. please note the celing is going to be removed and this work can be done while the old interior is completely out. The inspection report says the following need to be done. - Underpurlins not supported at ends causing sagging over rear section of roof. Additional struts required including bracing / strapping - Underpurlins to main section of roof require additional support at the joins or overlapped areas. - Strapping or bracing to existing struts required including multiple locations. Supply and installation of required roof bracing Any additional structural timber supports needed Important: Must be a qualified carpenter (no handymen)

Carpentry / custom wardrobe cabinetry work, to add rails and shelves into inbuilt wardrobes, in white melamine. Two wardrobes of 2-3 meters each. We can evaluate design requirements, depending on cost.

I have six counter stools and feel they are too low for the bar area they sit at. The seat height is 64 cm and I think they need to be about 6-7 cm higher. As I really still like the stools I’m wondering if it’s possible to get a carpenter/furniture maker to raise them about 6-7 cm. So 24 legs in total! I am quite open to this would be done but the options include splicing extensions into the bottoms of the legs, or making timber leg extensions in a style that fits for example maybe more of a foot on the end.

Skirting to be done 30m2 92 Half Splay Remove current required also All corners to be mitred cut

Using standard Bunnings Kaboodle and/or Ikea (or similar) kitchen/bathroom cabinetry (to be supplied by me) assemble and instal compact integrated home office / study nook along one wall - available space to work with- 3.7m width, 580 depth, 2.4m height. Includes desk, bookshelves, drawers, cupboards, filing cabinets etc - plus include provision for hidden cabling - power point/s, plug in USB ports, under cabinet lighting, wall mounted screen/s and tv etc. Refer example pics attached for what’s required. Your experience, clever ideas and suggestions to enhance this project will be enthusiastically welcomed. Thank you.

Looking for a handy man or cabinet maker to assemble and install our newly purchased IKEA cabinetry in the laundry we are renovating. There are 3 x modules below bench, and 1.5 modules overhead (above future splash back). Bench installation will be by others

- cracked and chipped stained glass on front door

Hello, I'm hoping to have someone build a very basic flat sleeping platform for my 2013 Toyota Prado. It just needs to be a flat wooden plank with legs that raise it above the flattened seats. Sized for one person. These videos show what I want: https://youtu.be/2gti74xvq-M?si=bJ5flpi8o_1eLKfz https://youtu.be/JKehPCfOHns?si=sLf91JGlVs0R3Ykd

I need two pieces of thin wood cut down to size, a few mm off (3 x cuts) and then liquid nailed to the back of kitchen cabinetry.

I have a piece of hollow stainless steel tube (24 mm diameter and about 1 mm width) which I need cut in two pieces . Then another section of ( 24 mm diameter, 1.2 mm width 400 mm long ) stainless steel tube I need welded in between these two pieces. I have a Parrilla grill and want the axle/shaft lengthened. I have the steel piece but it needs to be cut back by 100mm as well. (Don’t know much about welding and whether anything else is needed, like an insert or something to wrap around it. Would need some advice on this.)

Looking for a professional and experienced cabinet installer to install a custom display cabinet (see attached drawing). Scope of work includes: • Install full display cabinet (all units already delivered and assembled, ready to go) • Install and secure left & right decorative columns (Roman pillars) • Cut and install top cornice with 45-degree mitre joints • Install doors and drawers to each unit • Secure cabinets firmly to wall • Apply “No More Gaps” neatly to all required areas • Install kickboards and support legs • Cut existing skirting board to allow cabinet to sit flush against wall ⚠️ Must have own professional tools, such as multi tools ⚠️ Must have experience with custom cabinetry and detailed finishing ⚠️ Clean, precise workmanship required

Old 1960s house. Has timber windows which needs sanding before painting

I need a flooring Scotia made to replace a section of Scotia on my floors. This style is no longer commercially available and I need to have it replaced to match the rest of the house. I need about 2m long of this (sample available - pictures attached). This does not include installing the scotia.

Installation of cabinet carcasses to brick wall

Installation of 2 cabinet carcasses in Dalkeith

Restore deck - clean and repaint/stain. Materials supplied.

Re-work /reconfigure /shift some existing kitchen cabinets and bench tops. Shift cook top, oven and HWS. Instal pantry. Create bigger fridge space

Our wardrobe is too deep and too bulky, but is otherwise perfect. Do you have the skills and the tools to reduce the depth to the minimum amount required by the drawer runners? (Cutting off around 10cm) If you have facilities to spray paint too, with pics of previous work, let me know and we’ll negotiate!

Need help to open the floor door in the photos for termite inspection underneath

We have a laundry cupboard that has been damaged and needs replacing and re-installed. The doors and sides are ok to repurpose and use. The cabinet has been moved out of its original position underneath the laundry trough. The cabinet dimensions are 76.5cm wide 61cm deep x 67cm deep.