Find experienced local carpenters in QLD

Hi, I’m looking for someone to assist with installing a dishwasher in an existing kitchen. The scope of work would involve cutting out the kickboard and removing the existing cabinet door to create the opening for the appliance. I can arrange the electrical work required for the new power point location. Ideally, it would be helpful if you could also coordinate or allow for a plumber to complete the final connection. I will supply the dishwasher. The model we are planning to purchase is below for reference: https://www.kogan.com/au/buy/kogan-45cm-freestanding-dishwasher-10-place-stainless-steel-kogan/ I have attached a few images below to help communicate the scope.

To install secondhand kitchen - cabinets only not benchtop All cabinets are pre-assembled and modular, so no major cabinet building or modification is required. Tasks include: Install cabinets according to layout plan Build and install new kickboards Build a new oven tower Assemble and install one new drawer unit Assemble and install one open shelf unit Experience with kitchen installation preferred. Must have own tools.

I’m looking for an experienced cabinet maker or joiner to supply and install custom cabinet doors for built in shelving under a staircase (see photo). Scope of work: • Measure and quote • Supply and install cabinet doors • Clean, modern finish • White to match existing cabinetry • metal hinges provided

We have three kitchen packs to be installed for 3 houses at the same location. Please only inquiry this is field of trade. ready to. Accomadation provided.

I need a curtain Track and Blind installer experienced in all types of fitting. I run an interior design business and need a reliable installer casual basis

I am looking to make a mobile bar set up for my business. I'm coming back to Australia in April and I'm looking for someone to help me make my design come to life. I have detailed plans for a flat-pack timber bar with shelving. I need: - Accurate CNC / cut-to-size panels - Frame cut and pre-assembled - Panels drilled with threaded inserts - Hardware ready for flat-pack assembly I will supply all materials. Looking for joiner/cabinet-makers Quality finish expected. Budget: $400–$900 depending on scope. I do not have any time constraints right now, at this moment I'm looking to try discuss and plan the possibility of a bar set up creation and work with someone as much as possible to make their life easier. Experienced or even new to the industry, if you are confident and would like to help then please get in contact.

Looking for some who can install joinery in Springhill Qld 6am to 2.30pm

Qualified cabinet maker required to construct and install joinery in an office kitchen at 27 Chambers. All joinery components are already on site. Shop drawings will be provided and must be followed exactly. This task is suited to an experienced cabinet maker only, as it involves cabinet modification, reconstruction, and precise installation. Scope includes modifying the existing left side tall cabinet by adjusting filler panels, replacing a side panel with a different thickness, shifting the cabinet to compensate for panel thickness change, constructing and installing new bulkheads, refitting hinges, replacing the door, and installing push to open hardware. The middle floor cabinet requires new doors using existing hinges and installation of push to open mechanisms. The existing right side tall cabinet is to be fully removed and disposed of, including bulkhead, and replaced with a new tall cabinet supplied on site, including fridge recess and bulkhead. Supply and fit new kickboard over existing, plus fit a kickboard under the shelf unit after cabinets are installed. Install recessed woodgrain shelf unit in wall section above skirting cable boxes. Materials are supplied and cut to size. New assembled right side tall cabinet, woodgrain shelf unit, hinges, adjustable shelves, and six push to open mechanisms are supplied. Installer must supply own tools, be reliable, tidy, and capable of high quality finish in an office environment. Please respond with experience, availability, and expected timeframe.

Hello, We are looking for an experienced carpenter, joiner, or skilled handyman to repair a faulty shopfront panel at our retail store, in Pacific Fair. The Issue: The vertical panel that features our "EYETESTS" sign also functions as a cupboard door to conceal our main security shutter. This panel is misaligned and will not close or lock properly. Due to the misalignment, it is rubbing against the frame, causing damage to the edge of the panel and preventing the locking mechanism from engaging. The Job: The task is to diagnose and repair the panel to ensure it closes flush and locks securely. The scope of work will involve: 1. Inspecting the panel, its hinges, and the locking mechanism. 2. Diagnosing the root cause of the misalignment (e.g., dropped/loose hinges, warped panel, issue with the lock). 3. Adjusting, re-securing, or replacing the hinges as necessary to ensure the panel hangs straight. 4. Repairing or adjusting the locking mechanism on the pillar and the receiving bracket on the door so they align and engage correctly. 5. Ensuring the panel closes smoothly without scraping or rubbing. 6. Testing the door to confirm it operates correctly and locks securely. Please note: The successful contractor MUST supply any necessary replacement parts (e.g., new hinges, screws, lock components). The cost for these materials must be included in your final offer. Requirements: - MUST have experience with commercial joinery, shopfitting, or custom door repairs. - You must supply all your own tools AND all necessary materials (as mentioned above). - Ability to work cleanly and professionally within a live retail environment. Location & Timing: Location: Ground Lvl, Pacific Fair Shopping Centre, Hooker Blvd, Broadbeach QLD 4218 (exact location will be provided once the task is assigned). Your offer should include your call-out fee, all labour, and the cost of any potential replacement parts needed for the repair. Thank you.

Kaboodle laundry has been purchased. Comes flat packed. We have 2 small kids and won’t have the time to install. Image attached. 2300mm long overall. Exclude electrical or plumbing and cutting bench for fixtures or sink.

We’re looking for a QBCC-licensed shopfitter/joiner to supply and install a custom colour bar in our salon at The Pier, Cairns City. Drawings and measurements provided. Scope: Supply pre-cut joinery (approx. $3,800 materials). Install colour bar onsite (commercial salon fit-out). Ensure compliance with QBCC requirements. Provide statutory defect warranty. You MUST have: QBCC shopfitting licence (provide licence number). ABN. Public liability insurance. Please quote: Labour cost (fixed or hourly + estimated hours). Material supply cost (if supplying directly). Timeline/earliest start. Examples of similar work. Budget: Open to quotes based on drawings. Site: The Pier, Cairns City. Please comment with: 1. QBCC licence number 2. Earliest start date 3. Rough labour estimate 4. Link/photos of similar work Drawings sent to shortlisted applicants only.

Need 3x bedroom wardrobes done, something modern, 1x pantry 1x hallway cupboard Must be experienced Give me an offer

Change the six drawers to soft touch Few kitchen doors need hardware change Make more storage space at the corners etc Need some one to come to the property give quotation and work from there. Paying $20 for visiting the property

I have got a joiner and I need to join the 5 inch to the 6 inch pizza oven flu. It’s a matter of lifting up the flu and placing the joiner in less than half an hours work.

Internal bifold laundry doors are completely off the tracks. I believe they will need new hardware and to be reattached.

Site installation of joinery at the Sofitel in Noosa.

OPEN TO QUOTES: I’d like a custom built-in made along a 3 m wall with a 310 cm ceiling. The desk will be on the left side (under an aircon), and I’d like the rest of the wall used for wardrobe and storage. There’s a window in the middle, and I’ve got a rough draft/render that shows the layout and window placement. Open to suggestions on how to best use the space, especially above the desk and in the wardrobe area. Not sure how much this will cost, so I’m happy for you to recommend materials, finishes, and layout ideas. Prefer something that will fit in with a Queenslander-style home.

have an old 1950s kitchen that we are doing up. I need one of the wallcabinets removed from the wall, cut in half and then remodelled into 2 lots of open shelving with glass doors removed, and then placed back on the wall one above the other. Cabinet is heavy solid wood and structurally sound and sturdy. Pictures below

Flatpack joinery assembled and installed, ordered through systems looking for tradesman

Need a French polisher or touch up company to treat some joinery defects. Very easy stuff just edging damage so basically just colour matching oak