Find experienced local carpenters in Baulkham Hills & Hawkesbury

Would like to make a new cabinet for my front office room. I have the drawing with dimensions. Need to make a study, well built cabinet with mixed open and closed door sections. See attached pictures for more information. I need it as a three-tower model. The left and right towers are taller ones. The centre one is a smaller module. The centre module needs to be more sturdy to hold the weight of the turntable, amplifier, and other devices. The green shelves are all closed doors. I want this to be finished in glossy white or grey.

Need 2x drawer to adjust /fix

2 bathroom ceiling paint 4 door knob replace Main door stain paint Grout filing Other small paint work

I removed two kitchen cabinet doors above the fridge because the fridge was too tall. Need the doors moved slightly higher by drilling new hinge mounting holes and rehanging /aligning the doors . Photos attached. Located in Hills showground . I would expect quotes around $100-$110. I prefer a cabinet maker rather than a handy man but a professional handy man that could do is fine for the job . Job involves : - Assessing current hinge positions - Drilling new hinge mounting holes slightly higher inside the cabinet -Reinstalling and aligning 2 cabinets doors - Ensuring doors open and close properly -The cabinet is above the fridge and easily accessible please bring your own tools and provide quote . Looking for someone experienced with kitchen cabinets and hinge adjustments

Round Wooden Doorway pull-up bar - adjustable height. Please look at the image and let me know how much it would cost to supply and install.

Looking for someone experienced to restore and refinish my timber front door. The existing varnish is peeling due to sun and rain exposure. The job includes removing old varnish, sanding, and applying a durable, UV- and weather-resistant finish while maintaining the natural timber look. Photos attached.

Hi, I need a local carpenter or handyman for a quick cabinetry modification to my kitchen island. The spaces are already cleared out and ready to go. The job involves: 1. 600mm wide cavity: Install a standard 600mm-wide internal cabinet frame into this void. It needs to sit on a small base to meet the 870mm under-bench height. Inside, I need one fixed shelf for a microwave and one drawer installed underneath it. 2. Other cavity: Add internal packing strips to the side walls so a new cabinet door can be cleanly hinged and hung flush with the rest of the kitchen.

Joinery for the house is already assembled and installed but need few remaining things completed like bulkhead, couple of doors, shelves etc. 3-4 Hours Job If someone can do aluminium door installation as well

Carpenter needed to help other carpenters with roof framing and roof sheeting 2-3 days work

I am looking for an experienced timber restoration/finishing specialist to restore my timber front entrance. The job consists of: - One timber front door – both interior and exterior sides - One adjoining timber sidelight/side panel – both sides - Timber door frame and surrounding trim Both the door and sidelight contain decorative leadlight glass, so care must be taken when sanding and refinishing around the glass. The exterior timber has become weathered and the existing finish has deteriorated. I would like the entire entrance professionally restored so that the timber looks refreshed and well finished while retaining its natural timber appearance. Work required includes proper cleaning and preparation, sanding back the existing deteriorated finish as necessary, careful hand sanding around mouldings and leadlight glass, addressing minor marks/discolouration where possible, and applying a high-quality exterior-grade UV and weather-resistant clear timber finish. The interior side should also be sanded/prepared and refinished so the whole entrance has a consistent, professionally restored appearance. The Tasker must provide all labour, sanding equipment, tools, masking/protection materials, stain if required, varnish/clear finish and all other materials. Please include in your offer: 1. Your experience restoring timber entrance doors 2. The preparation and sanding process you propose 3. The brand/type of finish you recommend 4. How many coats you will apply 5. Whether your quote includes all materials and any return visits required between coats Photos showing the outside and inside of the same entrance door and sidelight are attached. Location: Baulkham Hills NSW 2153 I am looking for a proper restoration, rather than simply applying another coat over the existing finish.

replace vertical timber sleeper retaining wall around pool & garden bed

Experienced Carpenter Needed ASAP, Dural Area Looking for an experienced carpenter, ideally someone very confident with finish carpentry, to rectify some recently completed work that unfortunately hasn’t been finished to an acceptable standard. There are 4 rooms in total, however 2 rooms are the priority ASAP as our painter is currently unable to continue until the carpentry is rectified. Work required includes: • Fix/rectify the existing wainscoting/wall panelling where possible, rather than replacing everything
• Remove and replace coving/cornice on 3 walls in each room
• Rectify skirting boards and architraves as much as possible without replacing them
• Fix/finish the rock wall, including sanding and preparing it properly for the painter
• General finishing and tidying of the existing carpentry so it is ready for painting The aim is to salvage and properly finish as much of the existing work as possible, rather than unnecessarily ripping everything out and starting again. We’re located in Arcadia and would ideally like someone who can come out, have a look at what has been done and provide a price for rectifying it. ASAP availability would be greatly appreciated. We’re flexible with weekdays, evenings and weekends. Please only respond if you have experience with this type of detailed finish/rectification carpentry. Happy to provide photos before you come

Need an experienced joiner to go to site and level kick bases, put base cabinets on screw together. Simple stuff easy money for someone who knows what they’re doing.

We need someone to put a TV cabinet together

Kitchen Cabinet Repairs Required Looking for a cabinetmaker or handyman experienced with push-to-open cabinetry. Work required: 1. Replace one push-to-open drawer mechanism – the hardware has failed. Quote to include all labour and materials, including new drawer runners and push-to-open mechanism if required. 2. Repair one top cabinet door – the push-to-open catch is not functioning correctly and the door does not close flush. Quote to include all labour and any replacement parts required to restore proper operation. Please quote a fixed price including labour and materials. Experience with push-to-open hardware is preferred. If replacement parts are required, please supply suitable compatible hardware.

Need a hole cut through the side panel of my laundry cabinet so the washing machine/dryer drainage hose can pass through to the waste pipe. # Cut a neat hole in the laminated cabinet panel # ring suitable hole saw/tools # Ensure a clean finish with no damage to cabinetry # Photos attached for reference Looking for a handyman, carpenter, or cabinet maker. Flexible timing. Location: KELLYVILLE

One of the hinges of the bathroom door came off. This needs to be fixed. Hinge and screw is already available

I need my existing kitchen oven housing cabinet increased by 10cm. I have an existing 90cm x 50cm x 57 oven which is being replaced with a new one that is 90x 57 x 57 so I need the housing adjusted. There is a 20cm drawer below so this can be used (10cm) to increase the housing to fit the new oven in. Therefore need sufficient skills to increase size using this drawer space including making the remaining 10cm gap good - probably by using the existing drawer cover and cutting in half and fitting (ie no long a drawer as it isn’t used anyway).

Im a carpenter and i I need some help with carpentry works, definitely tomorrow and potentially in the future also. Experience preferred but not absolutely necessary. Transport and tools again preferred, but not absolutely necessary.

We would like to Stain our treehouse. It’s 4m by 3m. 2 coats.