Find experienced local carpenters in North East Melbourne

Carpenter Apprentice or qualified that got experience of carpentry.

Looking to have the front fascia boards replaced. The fascia board is for a Gable Type roof and i would require a quote for Labour and Materials.

Windows to be sanded back and stain/varnish removed.

Build custom cabinet, white laminate, as per attached sketch

Looking for a skilled carpenter or handyman to build a cabinet in our garage with the following dimensions: • Depth: 80 cm • Height: 2.5 m • Length: 2.98 m Cabinet will be used for general storage. Shelving may be required depending on the final price - open to discussion. • Must bring your own materials/timber • Flexible with time, but would like the job completed within the next month Please send through quotes, availability, and any relevant examples of past work.

Would like to obtain a quote for kitchen cabinetry preparation for dishwasher installation. Our doors are 40cm wide and the dishwasher width is 60cm. Will require 1.5 cabinets allocated to dishwasher (could use left over 20cm for a pull out bin?). May also need to reallocate drawers. I believe the best spot for the dishwasher will be on the end in first image.

Chest of drawers were damaged during delivery and the company refuse to repair. Middle drawer corner has been smashed and hoping to have it repaired or to nearest repair as possible

Extended Decking with composite (20mm * 140mm) in square meter including wooden timber (90mm * 45mm)

Looking for an experienced Airtasker to apply 2 coats of stain to my merbau deck (approx. 5m x 6.7m including steps), pergola posts, and side steps. What’s Supplied: • 4L oil-based stain • Broom with foam applicator Job Includes: • Merbau deck boards • Pergola posts • Steps located along each long side of the deck • Be careful around house walls, garden edges, and surfaces Please include your availability for June and your ability to re-schedule due to weather conditions.

Small kitchen cabinet with laminate bench top for microwave/ air fryer As marked in picture

I have a small square corner of my deck I need staining with oil, I have the oil already.

Hi there, I’ve just moved into the property and I’m looking to get a dog ramp built on my staircase leading into the backyard. My dog has hip dysplasia, so I need something functional and sturdy to help him get up and down safely. I’d like the ramp to be positioned on the left-hand side of the stairs, where the brick wall is. It doesn’t need to be anything fancy—just strong and practical. Ideally, it should be around 300–400mm wide. The total length is roughly 3 metres, though I’m not sure if it’ll need to bend around the corner—I’ll leave that to your professional advice. I’d also need a small side rail or edge along the ramp to prevent my dog from jumping off straight onto the stairs. One of the steps has some rendering coming loose, which I can remove if needed to make installation easier—just let me know. I'm somewhat flexible as i have 'guesstimated' on price and happy to arrange a site visit if you want to quote more directly. Looking forward to hearing from you. Thanks!

Remove timber lengths, old shed door, colorbond small sheets, some recyclable timber etc…

Install a stainless steel cabinet on a stainless steel back wall mounted 900mm long x 600mm height

lift bed base (extending 4 posts higher and staining the wood to match)

I have a tenant who left an area of the lounge room removed of stain. I will need the whole room sanded back and re-stained. The room is approximately 3.75 x 4.25 and a small hallway about 1mx1.3m. The boards are solid wood. Need to match as close as possible to other rooms. Need to supply own tools and stain

I have a tall cat scratch pole which cannot be secured into the base because the board underneath chipped. I’m hoping it can be repaired quite easily - replacing it is $119 which I may just have to do, but interested in seeing what’s possible.

I need a cabinet maker to make a new cavity so my new oven sits properly. I don’t want a frame around it. Do not have materials, but colour doesn’t matter as we’re painting the kitchen. I was thinking maybe a melamine piece could cover the old space and be cut out to match the new oven. But whatever works…I’m flexible , whatever is easiest and cost effective, as long as oven sits properly. John

Bench top needing completion of two joins. We need straight join and one 45.

I would like a wooden step deck built to step out on from glass sliding door to go outside to paved area. Paving is uneven and I want to make it safer. L 1700 W800 Photo of similar idea but larger. Would prefer it not be screwed to bricks.