Find a local Tasker to help you make a kitchen cabinet in North East Melbourne

Looking for someone to cut and modify the existing kitchen cabinet kickboard to make room for a freestanding dishwasher. It’s a small job, just need the kickboard neatly cut to size. Ideally looking to get this done as soon as possible.

Looking for a carpenter or handyperson to make a couple of practical changes to our kitchen cabinetry. We're planning a full kitchen renovation in the next few years, so this needs to be functional and tidy, not perfect. Basic drawer runners are fine and a close colour match is fine. Job 1 – Dishwasher cavity - Remove an existing 45cm drawer bank next to the sink - Cut back the under-sink cabinet by about 15cm to create a 60cm opening for a standard dishwasher (the sink and plumbing are clear of this area) - Fit a new, narrower door to the sink cabinet - Add support for the laminate bench top across the opening There is already a dishwasher tap, waste connection and power point in the under-sink cabinet so we do not require any electrical or plumbing work.

Looking for a handyman or cabinetmaker to modify my existing kitchen cabinet to fit a new 60cm slide-out rangehood. The range hood already fits but it’s just not to the required height. The job involves moving the shelves up to achieve 650mm clearance from the gas hob to apply to standards and trimming the existing cupboard doors to fit. This is only for the modification of the cabinet. Not installation for the new range hood. Open to offers

Kitchen Cabinet Modification – Rangehood Replacement The old rangehood has been removed. I need a cabinetmaker or experienced handyman to modify the overhead kitchen cabinet to accommodate a new 60cm slide-out rangehood. The job involves: – Raising the cabinet base to align with the first shelf above. – Relocating the cabinet door hinges to suit the new height. – Making any necessary adjustments to fit the replacement rangehood. See photos of the existing cabinet and required modifications.

Redo kitchen doors and bench top and some cabinetry for tv unit

I have 2 kitchen cabinet doors that need replacing - just the same off white doors. One cupboard is a corner cupboard. See photos

I have a new undermount rangehood but the current cabinetry is for a slideout. Have removed slideout rangehood appliance but not current cabinet. Needs new cabinet or alteration that allows for mounting new rangehood. Involves. Remove current cabinet and install New cabinet: 600mm wide 720mm high Depth 350mm-450mm Requires: Assemble/build cabinet with three cut outs: one to dimensions as specified in pictures, one for cord, one at top for chute. I have a flat pack cupboard that may be suitable if cutouts are made but pre-drilled holes were in the way of the cutout.

Have a space for fridge, got a bigger fridge which won't fir into that space. Therefore, would like to extend countertop with backsplash and make a floor cabinet in that empty space.

Kitchen Upgrade & Cabinet Modification (Mill Park)Seeking an experienced carpenter or kitchen renovator to modify a recently installed Kaboodle kitchen in Mill Park. The job requires reconfiguring cabinetry to fit new appliances.Key Tasks:Dishwasher Space: Reorganise existing cupboards to create a gap for a freestanding dishwasher. Handling the required plumbing alterations is highly preferred.Appliance Downsizing: Remove a 90cm freestanding cooktop/oven. Modify the cabinet and benchtop to install a 60cm drop-in cooktop and a 60cm electric oven.Material Supply: Source and supply matching Kaboodle cabinet parts and benchtop pieces to complete the realignment seamlessly.Timeline & Inspection:Appliances Arrive: Friday, 28 August 2026.Site Visit: Looking for an on-site inspection and quote (materials + labour) in Mill Park between this afternoon and Friday morning.Requirements:Proven carpentry experience, specifically working with Kaboodle systems.Please bring your own tools and clear away debris.Trade licences for plumbing and electrical work are a major plus.

Kitchen Cabinet Door Replacement / Refacing I’d like to replace only the cabinet faces on the upper cupboards in the main kitchen and butler’s pantry with a medium-dark to dark wood grain finish, similar to the inspiration photo attached. I’d also like the open shelf replaced in the same matching wood grain. Scope of work: * Replace upper cabinet doors in the kitchen. * Replace upper cabinet doors in the butler’s pantry. * Replace one open shelf to match. * Supply and install new cabinet faces * Ensure colour and grain are consistent across all pieces. I’m also considering adding handles to the new upper cupboards. If that looks best, I’d potentially like all kitchen cupboard and drawer handles replaced so everything matches. Please provide a separate price for this option. I’ve attached: * Photos of the existing kitchen. * An inspiration image showing the timber finish I’m aiming for.

Scope of work: * Install bulkheads above the kitchen overhead cabinets to the ceiling. * Prepare and sand all joints and surfaces. * Patch any gaps where required. * Paint the new bulkheads and repaired areas to match the existing ceiling/walls. * Leave a clean, professional finish ready to blend with the existing kitchen. Please refer to the attached photos for the current condition. * Paint will be provided. * Please bring all other tools and any required materials.

I need kitchen cabinet altered to retrofit a dishwasher either next to the sink or in the rear of the island.

Cabinet Maker Needed to Adjust Kitchen Cabinetry for Stone Benchtop Realignment Looking for an experienced cabinet maker to inspect and adjust existing kitchen cabinetry to allow a stone benchtop to be moved back into its correct position. A stone mason has advised that the cabinetry underneath requires adjustment before the stone can be repositioned. There is currently movement/misalignment in the cabinetry which appears to have contributed to the benchtop shifting and cracking at a join. Scope of Works: Inspect existing kitchen cabinetry and supports. Move and re-level cabinetry as required. Reinforce or adjust cabinet structure to support the stone correctly. Ensure cabinets are level and suitable for the stone mason to reinstall/reposition the benchtop. Advise if any additional cabinet repairs are required.

Fix one half broken kitchen cabinet- drawer

Need kitchen cabinet 2.2m height 600mm depth 1m wide Sideboard with shelves and doors at front

Install kitchen and 2 cabinetsin laundry,all with side panels and infills. cabinets already screwed together, need to be positioned and secured. Fix price quote only, experienced installers only.

Need our kitchen cabinets and drawers to have mdf panels installed on them to give it a shaker style cabinet kitchen appearance. No paint job required as we will do that ourselves. I need the overall cost please all inclusive please. There are 18 cabinet doors and 8 drawers. You can quote your initial labour cost/callout fee as the price here and can mention in the message section what the entire project will approximately cost and finalise after inspection. Thanks. Provided sample (first photo)for reference.

We need kitchen cabinet doors created and installed for our kitchen. Sadly these are slightly unusual sizes. We have all hardware and this will be available to use, we simply need the doors made and installed, ideally with a plain white vinyl wrap to match the existing frames. We also have the old kitchen cabinet doors for reference if this is useful. In total we need: - five cutlery drawer doors - one island cabinet door - four cabinet doors - one corner cabinet that will need a hinge in the middle - one small cabinet above fridge - one oven hood door

Price is for install only. Supply costs will be reimbursed. Supply install a pull-out drawer system inside an existing kitchen cabinet. The internal cabinet dimensions are approximately 685 × 364 × 540 mm (W × H × D). The installer should supply all required hardware and materials. The pull-out system should include three tiers, preferably with adjustable heights so different items can be stored. Please make an offer and outline how you would achieve this.

I need help with a kitchen cabinet repair. The cabinet drawers are covered with a textured, fairly thick PVC/vinyl wrap. On the drawer directly under the induction cooktop, the top edge has started to peel and won’t stick back down. I suspect it’s caused by the heat. See attached photos.