Find experienced local carpenters in Blacktown

Jobs include: - Fix a door of a cupboard - put glue near the sink area Please look at the photos for your reference and feel free to ask any questions.

Looking to get a solid timber tv unit built around a wire mesh dog crate. Photos attached as a reference. AI Generated Photo of what we are after. Dimensions are approx 2.1mLx0.76mWx0.7mH

To replace fit 2 Kitchen Cabinet door hinges

Looking for a carpenter to construct a timber frame for a flat-roof alfresco area attached to the rear of a double-storey home. Supply and install posts, beams and roof framing only. Frame to be designed for a flat roof.

Please check the photos. I would like a small cabinet/shelving unit similar to the one in the last photo. Open shelves on the left side are fine—no doors needed. I’d like to keep the design simple and modern.

Im looking for a handyman or carpentry skill person help with my mini van build. Not a big job. Im under a budget. Im only available during the weekends i can drive to your workshop. Or weekdays you driving to my place. Im around blacktown area. If you able to help give me an offer thx.

The three timber posts in the backyard retaining wall have rotted and need to be replaced. I’d like to replace them with galvanized steel retaining wall posts rather than timber for better durability.

Looking for an experienced carpenter or handyman to install a 15mm plywood subfloor over an existing timber deck for an enclosed balcony-to-sunroom conversion in Seven Hills. Framing and windows are already professionally installed. Project Specs: Floor Area: 6.2m x 1.9m (~11.8 sq m). Existing Base: Timber deck boards running parallel to the house walls. Materials: 5 sheets of 2400x1200x15mm CD structural plywood. Scope of Work: 1. Cut & Layout: Cut and lay sheets into a staggered brick pattern. Row 1: full 1200mm width. Row 2: ripped down to 700mm wide. 2. Edge Sealing: Seal all 4 edges of every cut and factory plywood panel with a 1:1 PVA glue/water mix before fixing to prevent moisture swelling. 3. Installation: Apply continuous lines of construction adhesive (Liquid Nails) to the deck boards to prevent squeaks. Fix sheets using 50mm timber screws spaced 150mm at edges and 300mm in the center. 4. Gapping & Sealing: Maintain a mandatory 3mm expansion gap around the perimeter and between all sheets using spacers. Fill all joints flush with flexible polyurethane timber gap filler. Important Notes: Materials Provided: I will supply all permanent materials (plywood, PVA glue, Liquid Nails, screws, timber gap filler). Tools: Please bring your own professional tools (circular saw, guide rails, drill/impact driver, caulking gun). Precision: Total floor buildup must remain tight/flush due to low ceiling constraints. Care is required at the transition doorway to ensure it does not create a severe trip hazard. Timber faces must remain raw (no membranes). Please provide your labor quote and estimated timeframe. Settings: Location: Seven Hills, NSW Task Type: In Person

Furniture installation complete house

Tv wall cabinet for 220 by 350 cm

Need help with staining a front door. The job involves preparation, sanding, staining.

Replace two hinges of kitchen cabinet

Looking to turn dead space under the stairs into a useful area in my Pilates studio

Need someone to assemble my storage unit shelves. I have 2x of them, 4m x 2m shelving units and need someone to assemble them for me

Need an experienced carpenter tomorrow to assist with residential renovation work. Basic carpentry etc. Hourly or day rate. Cheers 👍🏽

Looking for someone who can help to fix the timber stairs of my deck. Two steps are damaged and need to add an additional step at the bottom for safety.

Hello, We are looking for an experienced handyman, joiner, or cabinet maker to repair a broken cabinet door at our retail store, in Rouse Hill Town Centre. The Issue: A cupboard door on one of our sales floor cabinets has completely come off. It appears one of the clip-on/slide-on European hinges has failed or broken, and staff have been unable to re-attach it correctly. The door is currently off and cannot be used, which looks unprofessional. The Job: The task is to professionally and securely re-hang the cabinet door. The scope of work will involve: 1. Assessing the condition of the door, the hinges, and the mounting plates on the cabinet frame. 2. Correctly re-attaching the door to the mounting plates. If any part of the hinge mechanism (either on the door or the frame) is broken, you will need to supply and install a new, matching hinge set. 3. Adjusting the hinges so that the door is perfectly aligned, hangs straight, and opens/closes smoothly. * Please note: The successful contractor MUST supply any necessary replacement parts, such as a new set of concealed hinges, if the current ones are found to be broken. The cost for these materials must be included in your final offer. Requirements: - MUST have experience with cabinetry repairs, particularly with installing and adjusting clip-on/European-style concealed hinges. - You must supply all your own tools AND all necessary materials (as mentioned above). - Ability to work cleanly and professionally within a live retail environment. - Public liability insurance is required. Location & Timing: Location: Rouse Hill Town Centre, Cnr Windsor Road and White Hart Drive, ROUSE HILL. When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete repair. Your offer should include all labour costs and the potential cost of supplying new hinges. Thank you.

Hello, We are looking for an experienced handyman, joiner, or cabinet maker to repair a broken cabinet door at our retail store, in Westpoint Blacktown. The Issue: A cupboard door on one of our sales floor display units has come off its hinges. The hinges appear to have pulled out from the cabinet frame, and the door is now unable to be closed, which looks unprofessional and is a potential hazard. The Job: The task is to professionally and securely re-hang the cabinet door. The scope of work will involve: 1. Assessing the condition of the door, the hinges, and the screw holes in the cabinet frame. 2. Repairing the screw holes if they are stripped (e.g., by filling and re-drilling). 3. Securely re-attaching the original hinges and re-hanging the door. If the original hinges are broken, you will need to supply and install a new, matching pair. 4. Adjusting the hinges so that the door is perfectly aligned, hangs straight, and opens/closes smoothly. Please note: The successful contractor MUST supply any necessary materials for the job, including filler, screws, or potential replacement hinges. The cost for these materials must be included in your final offer. Requirements: - MUST have experience with cabinetry repairs, particularly re-hanging doors with concealed/European-style hinges and repairing stripped screw holes. - You must supply all your own tools AND all necessary materials (as mentioned above). - Ability to work cleanly and professionally within a live retail environment. - Public liability insurance is required. Location & Timing: Location: Westpoint shopping centre, 17 Patrick St, Blacktown NSW 2148 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete repair. Your offer should include all labour costs and the cost of supplying any required materials. Thank you.

Brand new in Box- Kitchen Island Cart with Stainless Steel Countertop Please see image below

1 screendoor needing to have rivets replaced to realign it; back door is a bit sticky might need some sanding down to facilitate it opening better; we have 2 doors we would like to replace with a solid door, painted and locks installed(need to look into purchasing doors and locks); we have a lock on a door that might need replacing if not able to be tightened.,,