Find experienced local carpenters in Marsden Park

Build new bar cabinets Replace existing kitchen timberis doors , panels with fluted panels in the kitchen Attached before and expected after work images

Door replacement installment and external frame fix

Looking for an experienced carpenter/handyman to install vertical pre-drilled shelf support boards inside 3 bedroom wardrobes. -Bedroom 1 & 2: One side is a wall and the other is MDF\. - Master bedroom: Both sides are MDF. - Supply suitable pre-drilled boards (available at Bunnings) if required and securely fix them at the appropriate height. I will install the horizontal shelves myself later at my preferred heights. No shelf installation is required. Please bring your own tools and provide a quote including labour and materials. Photo attached for reference. You are welcome to visit once and check the exact measurements for getting suitable vertical boards.

We recently purchased an LG French door fridge, but the doors don't have enough clearance to open properly in the existing fridge cavity. The fridge fits flush into the space, and the two right-side doors open fully. However, the two left-side doors are obstructed by the wall and surrounding cabinetry. We need help with two modifications: • Top left fridge door: Remove the right-side panel of the surrounding kitchen cabinetry to give the fridge enough room for the door to open fully. • Bottom left freezer drawer: Remove a section of the skirting board at the bottom left of the wall so the freezer drawer can open further. We're looking for someone experienced who can assess the area and carry out the work. We'd like the cuts and finished edges to look neat and blend in with the existing cabinetry and skirting, with no exposed raw wood. We also need to ensure that removing the cabinet side panel won't compromise the stability or safety of the mounted cabinetry. Ideally, we'd like the work done on 30 October or 2 November, but we're flexible. Please let us know if you can help and provide a quote, price is negotiable. Thank you!

I need to get my house painted and wood work restained

Looking for an experienced handyman or carpenter to repair a chipped/broken timber stair edge and reattach or replace the detached trim piece. Requirements: • Repair the damaged stair nosing/edge. • Secure the loose piece or replace it if necessary. • Match the existing timber colour and finish as closely as possible. • Supply the required tools and materials. • Leave the staircase neat, secure and safe to use. Photos attached. Please provide a fixed-price quote including labour and materials.

Note: this is a re-stain, not a paint job. I want a penetrating deck stain or oil that shows the timber grain, not a solid paint coating. Hi, I'm looking for an experienced deck finisher to restore two timber decks at my home in [suburb]. Areas: • Front entry/porch deck: about 3.94m deep x 4.6m, with a picture-frame border and a step edge • Alfresco deck: about 4.3 x 5.9m Current condition: The decks have a dark brown finish that has worn and faded in high-traffic areas, and some boards are weathered. Photos attached. Scope I'm after: • Clean the decks properly (deck cleaner or pressure wash) • Sand back to an even surface • Apply 2–3 coats of a quality exterior decking oil or stain in a [dark brown / similar colour to current] finish • Protect the surrounding walls, door threshold and rendered planters • Leave the site clean Please include in your offer: • Whether your price includes materials, and which product you'd use • Whether you recommend 2 or 3 coats and why, and how long the job will take, including drying time • Photos of similar deck jobs you've done • Any repairs you notice are needed, such as loose or damaged boards Timing: Flexible, ideally within 2–3 weeks, weather permitting.

Hey guys, Looking for a carpenter to attend to some new house frame inspection items. Items to do: - Add Multigrip/Strap tie down to rafters - Add 3 blocks at some wall junctions Can provide material onsite. Basically looking for someone for a day as there are 2 sites around Marsden Park. Our carpenter is not available till next week and we would like to get it done quicker. Please provide your day/hourly rate for tomorrow if available and need to make sure you have basic carpentry tools eg. circular saw, nail gun etc. Thank you!

One set of garage shelves needing to be built. I have tools but good if you have your own. Not sure the specific type needed. Shelves are like the image shown

Looking for floating spiral staircase

I have a set of individual brass decorative panels (photos attached) that need to be assembled and mounted onto a custom wooden frame/backing to create a free-standing temple arch (similar to the reference photo attached). The brass pieces include: * 2 curved arch sections * 2 side pillar panels * 2 bottom floral panels * 1 centre decorative crest * Small brass nails supplied What I need: * Measure and design a wooden backing/frame to suit the brass pieces. * Cut and shape the wood to form the complete arch structure. * Securely fix all brass pieces onto the wooden frame using appropriate methods. * Create a sturdy self-standing base/support so the arch can stand independently behind a home mandir/pooja setup. * Ensure the finished product looks neat from the front with minimal visible fixings. * Sand, finish and prepare the wood for indoor display.

Build a built in cabinets in the garage or

Ikea cabinets to be installed in the pantry. Design and measurements attached.

I would like warm LED strip lighting installed under my upper kitchen cabinets. I want no visible wires, and I want it to look fully built-in. The lights should be soft, continuous (no dots), and ideally connected to a switch. • Colour: Warm white (3000K) • Type: COB LED strip (no visible dots) • Finish: Aluminium channel with diffuser • Placement: Front edge under cabinet (not at the back) • Wiring: Fully concealed

Looking for carpenter for

Hi , I have timber pine decking in area of around 35m2 in my backyard. I want to get it replaced with ECODECK on already existing base. I will bring the material myself.

Looking for an experienced cabinet maker/joiner to build and install custom garage storage cabinets with the following spec: 🔹 Width: 4 meters 🔹 Height: 3 meters 🔹 Depth: 60 cm 🔹 Multiple internal compartments/shelves for storage organization 🔹 Strong, durable materials (plywood / melamine) 🔹 Clean edges, good finish 🔹 Fixed to wall & leveled Requirements: ✔ Previous experience with custom garage cabinets ✔ Provide material options and quotes (standard vs higher end) ✔ Include installation cost in quote ✔ Photos of similar past work preferred Please quote: • Materials + Labour • Whether painting/finishing is included

Need to add few support timbers in garage frame to support garage door installation. Also need to create box for inwall cistern. Plan and measurements will be provided along with timber. Just need Labour. handyman can also do this job.

Custom cabinets for Kitchen heavy duty and the other one for the island table

Scope of Work: Build and install laundry room cabinets (overhead and base units) as per the photo reference. Create space allocations for washing machine, dryer, sink, shelving, and storage matching the layout in the photos. Install benchtop, supports, hinges, handles, and all required fittings. Finish and align all cabinetry to match the style, colour, and layout shown in the images. Ensure all cabinets are safely secured to studs, leveled, and fully functional.