Find a professional staining service in Blacktown

Note: this is a re-stain, not a paint job. I want a penetrating deck stain or oil that shows the timber grain, not a solid paint coating. Hi, I'm looking for an experienced deck finisher to restore two timber decks at my home in [suburb]. Areas: • Front entry/porch deck: about 3.94m deep x 4.6m, with a picture-frame border and a step edge • Alfresco deck: about 4.3 x 5.9m Current condition: The decks have a dark brown finish that has worn and faded in high-traffic areas, and some boards are weathered. Photos attached. Scope I'm after: • Clean the decks properly (deck cleaner or pressure wash) • Sand back to an even surface • Apply 2–3 coats of a quality exterior decking oil or stain in a [dark brown / similar colour to current] finish • Protect the surrounding walls, door threshold and rendered planters • Leave the site clean Please include in your offer: • Whether your price includes materials, and which product you'd use • Whether you recommend 2 or 3 coats and why, and how long the job will take, including drying time • Photos of similar deck jobs you've done • Any repairs you notice are needed, such as loose or damaged boards Timing: Flexible, ideally within 2–3 weeks, weather permitting.

I need an experienced handyman or trade professional to install a wire trellis system onto an exterior Hebel wall for two heavy climbing roses. Because this is a Hebel wall, you MUST have experience drilling into Autoclaved Aerated Concrete (AAC). You will need to bring a standard drill with a metal/HSS bit and strictly use rotation-only mode (NO hammer action) so the Hebel panels do not blow out or crack. The Job Involves: • Mapping out a vertical/horizontal grid (approx. 4-5 horizontal wire lines spaced 40-50cm apart). • Keeping drill holes safely away from external corners and panel joints. • Cleaning out the holes, sealing them against moisture, and installing heavy-duty Hebel-specific nylon wall anchors (e.g., Ramset RamPlugs). • Running 2mm-3mm stainless steel wire cables and tensioning them with turnbuckles. The installation area will be about 1.8 to 2.4 metres high and 2.4 to 3.6 metres wide. Please include the cost of heavy-duty Hebel plugs, stainless steel vine eyes, turnbuckles + wire in your offer. Must have your own tools, HSS drill bits, and specific experience working with Hebel walls please. Flexible with date/time

Looking for someone to restore/stain our deck

Sand back the area and repaint. Will discuss wat needs fixing upon viewing

Hardwood floor sanding, staining & polishing (3 bed + study + living + hallway) Description: Carpet has been removed from a 3 bedroom house, study, living room, and hallway. Solid hardwood floor underneath. Total approx. 65 sqm. Scope of work needed: - Full sanding (coarse to fine passes) - Staining (open to colour recommendations) - Sealant + polish topcoat (2–3 coats — polyurethane or hardwax oil, happy to discuss options) - Cleaning between and after stages (vacuum, mop, and tack cloth) Timber condition: Uneven colour across the floor, some patches darker and some faded/lighter. Could be sun fading, old staining, or possibly water stains, not sure of the cause. No visible major damage, but happy to send photos so you can assess. Timeline: ASAP Please include in your quote: - Per sqm breakdown (sanding / staining / sealant+polish) - Product options (water-based vs solvent-based poly, or hardwax oil) - Estimated turnaround time - Your level of experience/ past jobs with hardwood floor sanding and polishing Attached are photos and floorplan

Hi, I’m looking for a repair my built-in 4-burner BBQ. Two of the burner tubes appear to be cracked/corroded and I’d like them inspected and replaced if required. Could you please let me know if you service BBQs like this, your call-out/inspection fee, and your availability? I can send photos of the burners and BBQ model if required. Thanks!

Need to sand, prime and stain the front door (door panels both sides and door frame). You need to arrange the tools to sand and stain. I will provide primer and stain. These posts on balcony needs to be painted (stain & varnish) as well. I need to get this done asap.

Description: I’m looking for an experienced painter/plasterer to repair and repaint several small water-stained areas on the ceilings of my home in Quakers Hill, NSW. Details: * Approximately 6–8 small ceiling stains across different rooms. * Stains are old and dry (not active leaks). * No sagging or damaged plasterboard. * Work required: * Prepare the affected areas. * Apply a stain-blocking primer. * Repaint the area to match the existing finish. * Blend the paint so repairs are not noticeable. Please bring all tools and materials. Experience with ceiling repairs and colour matching is preferred.

The bidet kit is already available. Installation is on a standard toilet in Mount Druitt beames avenue. You may need basic plumbing tools as I don't have the required tools to turn off and disconnect the water connection. Budget: $30 Please bring your own tools and ensure there are no leaks after installation. Location: Mount Druitt, NSW.

I need one handyman who can assist me for desk polish and driveway paint

Need help with staining a front door. The job involves preparation, sanding, staining.

I have water stain on my ceiling , could be a water leak or something else . Looking for someone to inspect and guide accordingly.

Need to sand the railing first and then stain it (requires 2 coats) I have the stain and paint required for the staircase - no need of steps just the railing

Need someone to Stain & Varnish 1 door, frame and its sides

Stainless steel stormwater grates need a 50 mil hole cut for the outlet approximately eight or nine cuts required. The job is to cut two as a test and if the if I’m happy with the cuts we can then do the rest.

2 sliding doors - 900x2065

I need to get my deck stained and pergola suppers painted. We’ve recently extended our deck along with the pergola. Deck Measurements: 9M*3.6M Please see the scope below: Clean and prepare deck surface (including sanding if required) Stain the full deck area (please include product recommendations) Prep and paint pergola side posts and top support beams Ensure proper weatherproofing and finish suitable for outdoor conditions Include labour, materials, and estimated timeframe Please let me know your availability to inspect the site and provide a detailed quote.

I got the material ready. Just need your professional experience to clean and stain the deck. Thanks

Hello! Looking for someone to paint 4 ceiling water stain marks in the property. Criteria: - Primer to be used first. - Colour match the ceiling paint (Bunnings Blacktown is probably closest). - No patching or sanding. - Drop Sheet required for the floor and the TV units. We will move the couch. - Primer, Paint, Ladder, Drop Sheets to be provide by tradesperson. We have no idea what this should cost & look forward to your offers!

We have an small unfurnished 3 bedroom house in Prospect 2148 (Blacktown) with cypress pine that we are looking to have sanded, stained, polished totalling around 77sqm. There is a newish extension of the house that has bamboo flooring so we would ideally like to stain the pine to a similar colour to match as best as possible. Water based polyurethane for polish that is toddler and dog friendly. Floor is in reasonable condition with mainly wear and tear but may require some putty and gap filling. Job can commence within next 5-7 days. More detailed photos or physical inspection can be arranged on request.