Find experienced local carpenters in Castle Hill NSW

Repair areas of Deck ,Facias, Hand Rails , Posts , Punch all nails in where needed, I will supply all materials

I’m looking for someone to build a sturdy outdoor timber surround for a rectangular plastic tub, similar to the attached reference photo\. **Tub dimensions:** 880 mm long × 630 mm wide × 500 mm high\. **Build dimensions** 900 × 650 mm **Requirements:** - Allow **10 mm clearance on each of the four sides**, giving a minimum clear internal opening of **900 × 650 mm**, subject to checking the actual tub’s widest external dimensions - The tub must slide in from above and be removable without dismantling the surround . All framing, supports and top trim must remain clear of this opening Open top with a flat timber border around all four sides**, neatly joined at the corners, similar to the reference photo. The border must not obstruct insertion or removal - Horizontal timber boards on all four sides with Strong, rigid construction with suitable corner posts, bracing and good quality screws. It should not wobble or rack when moved. - Finish height to suit the actual tub (flush to Tub) with the plastic rim sitting as close to the timber border. - Timber suitable for outdoor exposure, with all faces and cut ends appropriately sealed or finished with smooth edges, no exposed sharp fixings, COLOUR- DARK GREY Please quote for materials, construction, outdoor finishing and delivery to **Castle Hill, NSW**, including the estimated completion time

I need a qualified cabinet maker, premium shopfitter, or highly experienced carpenter to reduce the height of a white high-gloss wall cabinet so it aligns perfectly with the adjacent microwave cabinet. Requirements: • Must have a track saw with an ultra-fine laminate/finish blade to ensure zero chipping on the flat high-gloss finish. • The job requires shortening the cabinet box and cutting the two high-gloss door panels cleanly.

Description: Looking for a skilled carpenter or handyman to custom-build a 3-step wooden bench/display stand for my garden. Dimensions: 2m Length x 1.5m Height Structure: side cross based support (no front blocking)

Reattach a hardwood kitchen cupboard door - hinges are faulty so need replacement Also adjusting hinges on a tall pantry cupboard door

Need 2x drawer to adjust /fix

I removed two kitchen cabinet doors above the fridge because the fridge was too tall. Need the doors moved slightly higher by drilling new hinge mounting holes and rehanging /aligning the doors . Photos attached. Located in Hills showground . I would expect quotes around $100-$110. I prefer a cabinet maker rather than a handy man but a professional handy man that could do is fine for the job . Job involves : - Assessing current hinge positions - Drilling new hinge mounting holes slightly higher inside the cabinet -Reinstalling and aligning 2 cabinets doors - Ensuring doors open and close properly -The cabinet is above the fridge and easily accessible please bring your own tools and provide quote . Looking for someone experienced with kitchen cabinets and hinge adjustments

Need custom carpentry table built as an small extension to my kitchen counter. In White color Height 88cm 17cm width 30cm depth

This is Visit + Inspect + Quote Job as of now . Looking for an experienced carpenter/joiner or renovation tradesperson to visit our home, inspect the space and provide a quote for a small renovation to our master bedroom/ensuite area. The proposed work includes: 1. Image 1 - Close the existing opening between the bedroom and walk-in wardrobe to create one clean, continuous wall. 2. Image 2 - Create a new entrance into the walk-in wardrobe from the adjacent wall. 3. Image 3 - Update/reconfigure the existing walk-in wardrobe cabinetry to give it a more modern, premium look At this stage, we are looking for an onsite visit, measurements, recommendations and a detailed quote for the complete job.

Kitchen Cabinet Repairs Required Looking for a cabinetmaker or handyman experienced with push-to-open cabinetry. Work required: 1. Replace one push-to-open drawer mechanism – the hardware has failed. Quote to include all labour and materials, including new drawer runners and push-to-open mechanism if required. 2. Repair one top cabinet door – the push-to-open catch is not functioning correctly and the door does not close flush. Quote to include all labour and any replacement parts required to restore proper operation. Please quote a fixed price including labour and materials. Experience with push-to-open hardware is preferred. If replacement parts are required, please supply suitable compatible hardware.

Build pantry cabinets on the side of the kitchen island. it is supposed to be built on the side of the kitchen island which is under near the kitchen island. length is 2.7 depth is 25 cm and height is 75 cm

I would like to remove or update my overhead cabinet to help me keep a bigger fridge .

Hi there, I have recently settled into my new home and found that the existing refrigerator cavity is 180 cm high, while my refrigerator is 190 cm high. To accommodate my fridge, I have removed the over-refrigerator cabinet myself. I would like to have this cabinet professionally modified to reduce its height by 13 cm. Please note that I will handle the reinstallation myself. I can drop off the cabinet at your workshop and pick it up myself once the modification is complete, so I only require the workshop modification service. I have attached a few photos for your reference, including one labeled "picture 4" where I have marked the panels. I would appreciate it if you could assist me with the following questions: 1.What would be the estimated total cost for the cutting, painting/refinishing, and overall modification? 2.What is your current turnaround time for a job like this? 3.Can the existing hinges still be reused? When modifying the cabinet, would you be able to pre-drill the new hinge holes (concealed hinge cups) for me? 4.Please refer to the attached photo "picture 4." I have labeled the panels from 1 to 5. My understanding is that all 5 of these panels (the back panel, two side panels, and the two doors) will need to be trimmed down vertically to reduce the total height. Is my understanding correct? Thank you for your time, and I look forward to your quote and advice. Best regards, Xiang LIU

Have a kitchen bench top that has cracked. Need to have it replaced with a new cooktop and oven

I like to install below cabinet in my house wardrobe with mirror: 2300*1600*580 Board: White HMR 16mm Edging: White 1mm include 4 mirror 390*2000 include Hanging Rails push to open doors Shoes Shelf: 2300*1450*300 Board: White HMR 16mm Edging: White 1mm include 7 Shelves Laundry: 2@ cabinet: 800*850*300 Board: White HMR 16mm Edging: White 1mm Include 2 Shelves Rooms: wardrobe with mirror Door: full package for each room Board: White HMR 16mm Edging: White 1mm include 2 mirror doors and Rail include Hanging Rails include 5 drawers for each room

Need to get cabinet doors and cabinets made under bench top in laundry room. Provide cost for install, I can but material from Bunnings.

Need a fix for my 3 kitchen drawers. They are bit misaligned and loose. I tried to apply a fix but that did not help. 1 photo is with the fix that I applied & the other photo is a good part. Any materials will be paid seperately

Hi, I’m looking for someone who can build a feature wall with a built-in fireplace. Preferably someone with a carpentry licence. There are two walls in the house that need to be done. You are more than welcome to visit the site and take measurement if possible.

Hi, I’m looking for someone who can build a feature wall with a built-in fireplace. Preferably someone with a carpentry licence. There are two walls in the house that need to be done. You are more than welcome to visit the site and take measurement if possible.

Extend out bottom step approximately 530mm to make a landing including bottom step of 750mm wide. Current step is currently 1700mm wide by approx 220mm deep. Want to make a landing so total landing including step is 1700mm X 750mm. This landing won't be a permanent feature so we don't need it to be painted or sanded. It will sit on top of the concrete but does not need to be attached. It needs to be freestanding. Can use treated pine for example from Bunnings (see attached) to keep cost down