Find professional window and door services in Manly NSW

Installation of a wooden bifold door for a downstairs utility room/bathroom. Door dimensions are 794 x 2023mm. Requirements: remove and dispose of existing plastic folding door. Source and install new white wooden bifold door to finished standard (painting/coating as needed) Clean and dispose of any mess. Photo's are of existing doors and screenshot of desired appearance (though willing to consider other doors based on pricing)

Small chip, needs filling colour match and painting in spray booth

One of our bathroom doors at our cafe has been broken. As per pics the hinges have been torn off so we will need either some plates to overlay the original hinge areas or new partitioning/structure.. Open to ideas

I currently have some very heavy doors that need replacing. They are 225cm in height, 43cm wide. Currently 4 panels. I need them replaced with a light weight rust proof solution, as we’re close to the ocean. Do you have suggestions on what could be used and how this job can be completed?

Needs to be screwed into a brick wall

The garage door has a lock which works, however the mechanism which moves a metal pole up and down is no longer preventing the garage door being opened when in the locked position. Probably requires a new metal rod with a hole drilled in it and a pin through that, and some tools to replace the current one.

Mesh needs replacing on screen door

Sliding doors has new rollers but needs adjusting to better fit frame

I need a fly screen putting on by bathroom window - see pictures.

Repair gyprock and sand ready for painting less than half mitre square

new hinged (on left side) door 2400 high x 820 wide TBA - swing outwards and a latch lock on right side to lock only

I need a new fly screen to be fitted to my steel security door. This will involve removing the 4 steel strips on either side of the security door, which are held on with pop rivets. Removing the fly screen. Repainting the base cross section , there is a little bit of rust (paint supplied by me). Supplying and installing new fibre glass fly screen with a suitable adhesive around the sides, and reinstalling the steel strips with pop rivets on the four sides. Any old adhesive and/or fly screen to be cleaned off before installing the new fly screen.

We have a welded steel security door, and it needs the fly screen to be replaced. This will entail removing the steel strips, which are pop riveted to the steel frame on all four sides, removing the old fly screen, applying suitable adhesive, and fitting new fibre glass fly screen, and reattaching the steel strips on all four sides with pop rivets. Door is 2,200 x 910mm dimensions. There is a bit of rust on the base section of the door, which will need repainting (I’ll supply paint).

Door hinge is loose making the door scratch on the floor

We require 2 new timber doors for our members changing rooms at our surf club (North Steyne, Manly beach). Find attached pictures of the current doors and lock configuration. The latch system breaks regularly and is no longer fit for purpose. We have just had the wall key-pad installed but require new full height doors with lock mechanism that is key-pad operated only. Could you quote for the following: Removal of the 2 existing doors pictured. Supply, deliver and install replacement full-height doors Door Sizes: 2030 x 810 x 35 (confirm on site). 1 x LH hinge, 1 x RH hinge Door Vents - In lower section of the door, to provide air ventilation Lock Exterior - No handle, Door opens only via the wall keypad Interior - Handle on inside so members can exit change rooms (If Possible) painted to match existing colours. Site is North Steyne Surf lifesaving Club, 95a North Steyne, Manly 2095.

Replace a (shattered) 10mm glass shower door and remove and replace fixed panel. Approx 200cm x 60cm door and 200cm x 30cm panel. Swap the hinges over from glass mounted to wall mounted so door opens from the other side. Luckily, wall and studs behind the shower cubicle can be accessed as it is under the stair cavity. So can determine ideal attachment point to secure new wall-mounted hinges.

The steel handle of the integrated freezer door has detached at the base making it very difficult to open freezer.

Install door handles on bedroom doors and fix tap handle in bath

We need to make usable again a garage door that has been closed for a long time and make it automatic. Would need to check if the one there can be use, otherwise a new one

We need some curtains to be hung in the baby’s room. We also need someone to look at our doors and work out why they are sticking when we open them. This will probably lead to a future job where someone can hopefully fix that problem too!