Find professional window and door services in Ashwood

Install doggy door to fly wire sliding door and assemble dressing table

The brand for garage door is Glidermatics GTS. Very noisy while door opening only, no noise when shutting. The noice from the chair while turning in box. I need a technician to open the box cover for a check and repair the chain or springs if necessary.

I need a medium size dog. It’s not double glazed glass

I have an already cracked pane of glass that I would like removed and a dog door installed with wood patching the remaining gap. Please complete asap

Cat has ripped through the mesh on our back door, need it replaced and hopefully replaced with some pet mesh

Need to install a Eufy C32 smart entry door lever and a door closer, for garage door connecting to the house. Hoping to get this done on Tuesday 11/05 but can be flexible

Have already taken out the passage door lever. Will need assistance to drill new holes to fit the slightly larger entrance door lever set

I’m attaching the pictures you can see there is one sliding door is missing we have frame. You can see the picture but I need frame with glass fitting sliding door fixed. Happy to arenas inspection

We have a 5 year old sectional CSI Classic garage door, and one of the nylon sectional hinge has broken off and requires replacement. (see photo attached). Can you please provide a quote for supply and install in Ashwood ViC 3147. Thank You.

I need a person to take our front door off its hinges (then put it back) so that we can install our fridge

Install extra large door handle to front door.

Need to fix door handles

purchased screen door needs to be fitted into existing frame. semi fitted door door handle jam need to be fitted

1) Make 2 threshold ramps for a disabled family member with dimensions of 11.5 cm height. (Exact measurements can be taken at sight). 2) Replace a door’s lock and loosen it as its tight

Need to caulk/seal about 30metres around newly laid outdoor tiles along retaining walls Landscaper can’t do it and has requested outsourcing Located Ashwood 3147

New fridge coming. Need someone with drill to take off front door to enable new fridge to be taken inside. Then reattach door

Purchased new sliding door lock. However the door no longer closes flush. the lock can be redrilled to be further back so the door closes flush. Fairly simple job. This would include: - take off existing lock ( four screws). - precise measuring and marking for door to be flush. - drill three new holes through timber. - bog existing holes (I have some builders big that can be used). - reinstall lock using new holes. (No need to supply lock). The door is also needing new rollers. As part of the above would like your help to lift off the door with me ansi spect which ones I will need to buy. Will pay extras should you have rollers to use on the spot, but otherwise I will go buy them after the above job and install Myself later.

Door purchased as per below. Door handles purchased. https://www.bunnings.com.au/hume-2040-x-770-x-35mm-internal-door-h1-pcm-h-l-bh1770pchl_p1960927?store=6011&gad_source=1&gclsrc=ds Size of current door 2015 H 775 W 36 D Trimming required Keeping existing door hinges

Take out sliding door and replacing new wheels

All materials provided. Just bring your tools and nails . Job includes installation of two doors. Doors are 720 mm. The installation of door jamb is part of job. Hinges, handles all is part of job.