Hire a professional washing machine repair service in Camberwell VIC

Hi, I’ve recently moved house and the removalists did not put my Miele heatpump dryer inside. I need it moved from outside and into my laundry to then be installed on top of my Miele washing machine. I believe that there are brackets already on my washing machine for it to sit on but unsure if I have all the right pieces. I imagine it is quiet heavy so could take two people.

I need someone to help fixing back this piece around the seal of my washing machine’s door

Our washing machine is not draining water - we suspect the drain pipe is clogged so this should be an easy fix - we just don’t have time to open the back to get to it.

I have a laundry with an existing laundry sink and plumbing connections. A new LG front load washing machine is being professionally installed by LG today . I also have a second top load washing machine that needs to be connected so that both washing machines can be used at the same time. Scope of work: • Assess the existing laundry plumbing setup • Connect the second top load washing machine • Supply and install any required tap adapters, splitters, hoses or fittings • Connect water inlet and drain • Ensure both washing machines can operate safely • Test both machines for leaks and correct operation Additional information: • The laundry sink already has two drain spigots available. • A 2 metre inlet hose has already been tested and is not long enough. • The second washing machine is located approximately 3–3.5 metres from the existing water connection point and may require longer hose runs. • Please include any standard plumbing fittings required in your quote. • Licensed plumber preferred. I am happy for the plumber to determine the most suitable plumbing solution on site. Photos of the laundry and current setup are available upon request.

Need someone experienced ASAP (Mon, Tues or Thurs) to service our LG washing machine and dryer. The dryer is not taking water out (the lint is wet). Both operational just need a service.

I need to replace existing washing machine taps with low profile ones I’ve purchased (https://ryvebathrooms.com.au/product/arco-right-angle-washing-machine-stop-non-return-valve/ ). Should be a very quick job for a plumber.

Moving in. Can’t work it out. Just need the right outlet pipe connection

Lights flashing on machine will not go into wash cycle

Our Bosch Series 8 washing machine (WAW32640AU/09 Aqua-Stop) is showing a flashing tap icon whenever we try to start a program and not filling the machine with water. Things we've checked: - Water pressure from tap is normal - Inlet filter is clean - Drainage hose has no kinks and empties directly into a sink (works fine on Drain program) - Filter pump is clean and impeller rotates freely We've ordered a replacement aqua-stop inlet hose, and need to disassemble our washing machine to replace the hose and / or troubleshoot other possible causes of this issue. Note the washing machine is under our dryer so will need to remove the dryer first to get access to the washing machine.

Drill hole in the brand new U-bend plumbing inlet that is still sealed, connect washing machine hose, tighten metal fastener

Moved houses (from next door). Need help disconnecting waterline (see photo) from Fisher Paykel fridge from old house and connect it with new fridge Also need washing machine connection fixed (see photo)

samsung eco bubble tambour erreur 3E not spinning

My washing machine has ample water flow, however keeps presenting an error and halting the wash cycle.

Washing machine doesn't agitate

The hot water pipe and cold water pipe on the washing machine that connect to the wall need to be replaced as the current ones have spilts and are lacking ( the new pips have already been purchased).

I have a broken washing machine which is a Lavamat Lavalogic 1620 by AEG. It appears to wash okay and spin okay, however it will not drain properly. It just buzzes. I have checked the little drain at the front bottom of the machine. I have also had a plumber look at all the drains and they are operating properly. If anyone could help me out and check if it might be a quick and easy fix. Thanks, Robyn

Install a replacement rubber door seal on a Bosch WAS28461AU Washing Machine. The new, replacement rubber door seal is already onsite, ready for installation. The washing machine sits on 4 anti-vibration rubber pads, and needs to be placed back onto those same 4 anti-vibration pads before the job is completed.

Replace rubber door seal on a Bosch WAS28461AU Washing Machine. The replacement new rubber door seal is already available onsite. The washing machine sits on 4 rubber anti-vibration pads and if moved to install the door seal, need to be put back in place on the anti-vibration pads.

Need to ensure our washing machine is correctly plumbed in. Miele machine says fault 0220

I need someone to come to my house in Camberwell and disconnect my washing machine that I got installed a year ago so I can sell it