Find a reliable cooktop installation and repair service in Camberwell VIC

I have an older Blanco 4-burner gas cooktop in Camberwell. All 4 burners work normally when lit manually, and the flames appear normal. However, there is no clicking sound and no spark from any burner when turning the knobs. I’m looking for someone experienced with gas cooktop/appliance repairs to diagnose and repair the ignition fault. Please include in your offer: – Call-out/diagnosis – Labour – Please advise separately if replacement parts are required Please mention if you have experience repairing Blanco gas cooktops and relevant gas/appliance qualifications.

Current cook top model is Bellini BDC906OTG. Would like to replace with BOSCH PKM875DP1A Series 8, 80cm. Need an electrician to install as well as making some adjustments to the opening so that the stove top can fit properly. Bench is laminated (not stone)

I would like to install my brand new oven.

The bottom edge banding on two overhead cabinet doors above the cooktop has warped from heat. The door faces are fine. I only want the bottom edges re edged. Do not quote to replace the doors. Scope; 1. Remove both doors, protect benchtop and splashback. 2. Cleanly cut back and remove the warped underside wrap only, leave the front face intact. 3. Prepare the underside edge, square, clean, and lightly sand for adhesion. 4. Supply and fit new plain white heat resistant ABS or PVC edge banding to the underside of both doors. Use hot melt or equivalent cabinet grade adhesive. No contact film. 5. Trim and flush both faces neatly, radius the arris lightly, seal the ends to prevent lifting, and clean any glue residue. 6. Reinstall and align the doors, check clearances to the rangehood and the neighbouring door, and confirm soft close works as before. 7. Leave the area clean Notes. • The repair is to the underside edges only. The colour can be plain white. A close white match is fine as the new edge is on the underside. • Bring 16 mm and 18 mm white edging so the job can be completed in one visit. Measure on site to confirm. • Location is an apartment kitchen near Camberwell Junction. Photos attached show the exact edges to be repaired. Onsite parking available. Requirements for the Tasker. • Cabinetmaker, shopfitter, or handyman with proven edge banding experience. • Provide a tax invoice if required. Please answer in your offer. Confirm you will re edge only, not replace the doors. Confirm you will use heat resistant ABS or PVC edging and cabinet grade hot melt or equivalent. Confirm your availability and parking needs.

Check for potential gas leaks in the cooktop.

I would like a quote to install/replace the existing electric. oven with a new one. Current oven is 90cm wide around 47cm high, cavity can be opened up to accommodate slightly larger oven if necessary. Current oven model is technika T948/1 for reference.

The Miele gas cooktop is about 10mm wider and 10mm longer than the existing Blanco cooktop. The cutout needs to increase from exiting 830 x 470mm to 860 x 490 mm. Benchtop is laminate / timber.

We need to remove the old gas cooktop and install the new one .The size is 90cm.

I have a 4 burner gas hob. Originally set to natural gas but can be converted to LPG. Basically I need this cooktop converted to LPG to connect to a LCC27 gas bottle. I had purchased the wrong fittings, so I just need help to select the correct ones.

replace a gas cooktop and install a hybrid gas and induction cooktop - Due date: Flexible

Remove existing gas cooktop and instal new gas cooktop NOTE must be a licensed gas plumber - Due date: Needs to be done on Wednesday, 1 March 2023

Kitchen Reno. Need to move fuse box, install power to new oven and cooktop, dishwasher and in laundry. add in lighting x 4, - Due date: Before Friday, 23 December 2022