Find experienced local roofers in Toowoomba

To Birdproof 21 solar panels on single story roof

Need help lifting and putting roof top tent into Ute and screwing into place. Will require two other people. 95kg tent

Budget: $1,000 - happy to discuss price after inspection depending on the extent of the damage. I need someone to repair an area of rotten and water-damaged timber around the eaves/fascia/verge of my house, as shown in the photos. I believe water is getting in somewhere around this area and may have caused some damage behind the visible timber. I want the damaged timber removed and replaced properly, with the area sealed so the water ingress is fixed. WORK REQUIRED: • Inspect the area and work out where the water is getting in. • Remove rotten and damaged timber. • Check behind the visible timber for any additional damage. • Replace damaged timber with suitable timber. • Make sure everything is secure and structurally sound. • Seal and weatherproof the area so water cannot continue getting in. • Recreate the existing shape and appearance as closely as practical. • Paint/finish the repaired area to blend with the existing house. I'm happy to consider a handyman or experienced DIY tradesperson for this job. You do not need to be a licensed carpenter or builder. However, I do want someone who is confident and experienced with timber repairs and working on houses. This needs to be a proper repair, not simply filling the rotten timber or covering it up. Please include some photos of similar repair work you have done if possible. The main priority is stopping the water ingress, replacing the damaged timber properly and leaving the area looking neat and secure. Happy to arrange an inspection before agreeing on the final price.

The bonnet is peeling the clear coat very bad, the roof is mainly just faded. Don’t need a perfect job, just want it to look decent. Black respray and top coat

Low set house with 22 solar panels require cleaning.

I require roof cleaning and sealing - only half the roof as the other half is full of solar panels but there is also a double carport which also need to be done. Both need cleaning and sealing. Colorbond trimdeck roof approx. 15 deg pitch

I need a handyman or experienced shed installer to finish putting up my 3m x 3m EasyShed Gable Roof garden shed.All of the individual roof panels and wall panels have already been fully assembled flat on the grass. The main task left is standing the walls up, joining them together, fitting the roof, and anchoring it down. Somewhere I did wrong, the rebate concrete slab is slightly too small. Need an installer to fix the problem and build the shade. Thank you

Need 65 lineal meters of gutter put up around 1 story house. I have lengths cut to size and premade internal and external corners. I need 5 droppers cut in. All the old gutter is removed. Turning up Friday so ready to go Saturday.

gutter cleaning for motel.

Hi, I’m looking for someone trustworthy in Toowoomba to repair single-storey Colorbond roof. Replace all existing roof screws with new roofing screws. Supply and install a new Dektite if the existing one is worn or leaking. Reseal any vent/flue flashings that need it. Clean all gutters and roof valleys.

I need 55LM of gutter pulled down . Will be going in the bin so no need to take care with it . Standard height so can be done off a small ladder

Caravan skylight installation I need a qualified trade professional or someone experienced to enlarge an existing roof hatch opening and install a new skylight on my caravan. I already have the skylight unit; this is for labour, cutting, and sealing only. Job Details:Roof Material: Composite sandwich panel (Fiberglass skin with foam core). Framing/Wiring: No timber framing or structural modifications are required. No wiring or electrical connections are needed for this job (wiring will be handled later). What You Need to Provide:All necessary cutting tools (jigsaw/router) and masking materials to protect the roof skin from scratches.Premium marine/caravan grade UV-resistant polyurethane sealant (e.g., Sikaflex 291 or 252) to ensure a 100% waterproof seal.Proven experience cutting caravan composite panels and sealing external hatches.Please clean up any foam/fiberglass debris after cutting. Looking for a neat, watertight finish.

My dog can jump my 6ft fence. We are trying to make it so he can’t but putting spikes or a roller on top of the fence. Open to ideas. The fence will still need to be operational

Require a roof plumber to check for possible leak in roof in garage towards roller door end. Plus appearance of mould,

Hi I have a house in Harristown. I need gutter installation 54lm and 4 down pipes. (I have removed the old one myself, preped the fascia and new ones have been delivered ready to install) This includes brackets, corners pieces, downpipes, rivets, downpipes elbow and connectors to gutter. Would you be interested and available to install? Gutters are quad 150 Spike bracket All materials supplied ( corner, gutter , spike bracket, rivet) Thanks

Some guttering on a single-storey house needs replacing and loose brackets may need attention. Looking for someone with guttering/roofing experience. Please quote for labour; I'm happy to pay for materials separately.

Looking for a qualified roofer or skilled handyperson to repair a 6m x 3m metal shed roof and install guttering in the Lockyer Valley area. Remove x2 damaged roof sheets and legally dispose of them off-site. Supply and install x2 brand new Monoclad sheets (Zincalume finish), each cut to exactly 3710mm long. Replace all existing roof screws across the entire shed roof with new waterproof screws. Install guttering onto the shed. Note: I have the metal gutter lengths here on-site already, but you will need to supply the missing hardware (brackets, clips, stop-ends, silicone/rivets, and a basic downpipe drop). Worker must supply the roof sheets, roof screws, and all required gutter hardware/fixings within the total offer price.Worker must bring all tools, ladders, and safety equipment.

Looking for a roofer or suitably experienced tradesperson to replace missing pop rivets identified in a recent building inspection. The inspection report identified: * 2 missing pop rivets from one ridge capping join * 1 missing pop rivet from another ridge capping join Photos from the report are provided. Requirements: * Supply and install replacement pop rivets * Take photos of the completed repairs * Provide a receipt/invoice confirming the work has been completed

Hi, I need an experienced handyman to safely remove a fallen TV antenna from my house. Current situation: The antenna base has detached from the roof/fascia and is currently hanging in the tree branches, held only by the coaxial cable. I do not watch local TV, so I just need it permanently removed. Required work: 1. Safely cut the cable and completely remove the antenna, bracket, and any loose wiring. 2. Crucial: Apply waterproof silicone sealant to the exposed screw holes on the roof/eaves to prevent any future water leaks. 3. Take away and dispose of the old antenna parts. Important note: This is a two-story house. You will need to bring an extension ladder tall enough to reach the roofline safely, along with your own tools and waterproof silicone sealant. Please confirm in your offer that you have the right ladder and sealant. Thanks.

Install 2 ring cameras outside a 1 storey unit. Must have experience and ladder and power tools.