Find professional local plasterers in Sydney City CBD

Airtasker Job: Gyprock + Furring Channel Work (Ready for Paint) I need a gyprocker to complete the following works: 1. Pelmet + Blind Concealment • Install furring channels and steel studs along the ceiling line. • Build a pelmet structure to fully hide a roller blind. 2. LED Feature Wall Preparation • On the section highlighted in the reference image, install furring channels behind the existing wall so the electrician can run an LED wire internally and keep it hidden. • After the electrician completes the wiring, return to sheet the wall with new gyprock. Finish Required: • All areas must be plastered, set, sanded, and finished 100% ready for painting. Requirements: • Neat, professional framing and gyprock work • Ability to coordinate timing with my electrician Reference images can be provided to show exactly where the yellow and green sections need to be completed.

Need to do a full ceiling and wall. Commercial job, need to get pricing for it. Job starts soon.

Hi, We have had 15 oyster lights removed in our apartment and down lights put in. There are also some bumps on the ceiling from where I stuck some balloons above the dining table. We would like the ceiling plastered where the oyster lights are (and if needed where the stickers were) and then the ceiling of the apartment (approximately 105 m2) painted white. Let me know if you need more info. Thank you, Charlotte

I need someone to prime and paint a small section of the wall and ceiling where a plaster pelmet has been extended with new mdf. Any gaps must also be filled. Paint and primer will be supplied. The colour is Dulux Lexicon Quarter.

Demolition Floating Gyprock Wall and remove waste. Wall is approximately 1.6m high by 5m long

We’re vacating our retail shop and need the walls tidied up for hand-over. Scope: - 20-30 tiny picture-hook holes (≈1 mm) - 10–12 slightly larger holes (≈10 mm) Task: Fill, sand flush, and paint to match existing wall colour. Date: Tue 23 or Wed 24 July (must be completed on one of these days). Location: Paddington.Parking is available

1. Cut gyprcok wall (direct stuck to block wall) 2. Install 10 angles (needs to be level for 2x shelves) 3. Re-plaster around angles / set and sand ready for paint. Only materials supplied will be angles, fixings for angles and plasterboard.

4 holes of varies sizes in drywall required to be patched.

Suburb: Sydney, NSW, 2000 Date of Work: Saturday, 7th June Looking for a licensed electrician to install three (3) power points on a gyprock wall. There is already an existing GPO on the opposite side of the wall. The wall is standard gyprock. See attached reference image for the exact wall and the exact highlighted area. Please bring all necessary tools and materials.

Need to get holes patched (see picture) Aprox 15 m per wall Will pay cash

2 x patches where gyprocking has been cut out need fixing. 1 x area is approx 40cm x 40cm and has existing gyprock piece, no need to bring your own 1 x area is approx 3 m long x 15cm-20 cm wide, you may need some offcuts patching and 1 coat of paint required (ceiling white or similar)

Need carpenter to put 75 inch TV on GYPROCK wall. Please give quotation with materials with finishing all necessary tast involved in it. As wall is not concrete. Location: 45 Shelley st, Sydney NSW 2000 CBD (Lift & Parking available)

I live in an apartment in the city. There is a hole in the dry wall which will need to be filled and painted over (white). See images. Please bring your own equipment and materials.

break a big mirror and remove it from a plasterboard wall. 61-63 market street Sydney 2000

I need a the supply and installation of four angles for columns, each 2700mm in height. Only four angles are required. We will handle the sanding after you set, so your quote should cover supply and installation only and setting. It’s a job that should only take a few hours.

Miscellaneous patching and plastering

Remove drywall and add studs to mount a TV cabinet. Existing studs are in the wrong place, and cabinet is too heavy for drywall. TV cabinet is 85kg, 245cm long by 45 high. Can provide assistance with lifting. French cleats provided. Remove rubbish at end of day.

I will need to paint this walls, it needs to be Sunday or any day early morning (5am). And fix the little hole in one of them.

I need to install 4 frames.

Crack in wall which requires gyprock repairing and repainting. Approximately 450mmx450mm of damage. We only have matching paint on site, but no other equipment. Location is Apartment in Sydney CBD Chinatown. There is free contractor parking on B1.