Find a professional mdf contractor in West Melbourne

I have 5 mdf sheets 1200*900*6mm and looking to cut those 100mm wide (1200*100mm) for wall panels. It will be 8 cuts per sheet. I will provide the sheets.

Looking for a skilled carpenter to supply and install MDF skirting boards throughout the house, about 120 linear metres in total. Location: Williamstown Profile: MDF square skirting with 1 line/bevel. Please include in your quote: Supply of skirting, fixing nails, and PVC glue Total cost Material delivery to site House is ready for installation. Flexible with timing over the next few weeks

Hi all, This one has been on our minds for a bit - hoping for a professional to do the following; - Purchase MDF Panels - Paint MDF Panels - Cut to size if required - Cut out PowerPoints within MDF - Install MDF Panels on feature wall. - Install MDF panels under island bench. - Mount TV on Feature Wall once MDF installed (75inch) Areas are pictured within this task, for reference. Paint: to match the’Matchamisu’ range, like below. https://www.bunnings.com.au/kaboodle-900mm-matchamisu-heritage-medium-rangehood-doors-2-pack_p0437311 MDF panels for feature wall; 4m W x 2.7m H https://www.bunnings.com.au/easycraft-2700-x-1200-x-9mm-easyvj100-primed-general-purpose-wall-lining-mr-mdf-e0_p0440018 MDF panels for under island bench: 3m W x 85cm H https://www.bunnings.com.au/easycraft-900-x-1200-x-9mm-easyvj100-wall-lining-primed-general-purpose-mr-mdf-e0_p0330843 I will provide the following for you: - All panels (you let me know how many of each are required). - Paint - TV & Tv mount supplied onsite. The tools, glues and nails (glue nails etc), to be supplied by installer.

Hi all, Please see: https://www.bunnings.com.au/easycraft-2700-x-1200-x-9mm-easyvj100-primed-general-purpose-wall-lining-mr-mdf-e0_p0440018 Looking for someone to install this on my lounge room wall. This process will require: - remove the TV from the current wall mount (75inch tv so it is not light). - install MDF. - cut outs as necessary (allowing for PowerPoints etc). - re-install Tv and wall mount to new desired height. Installer to supply tools needed for the job eg. Glue, liquid nails etc. the installation guide can be found on the webpage above.

*Budget negotiable* The job is to install 3 MDF panels (see link below) to bedroom wall. - Dimensions of wall: 2590 (H) 3230 (W) - Panels are 2700 (H) x 1200 (W) x 9 (D) - There are 2 power points; I'd like for these to be on top of the panels - Cornices can remain fixed - If possible, relocate the skirting in front of the panels (low priority) - No caulking, gap filling (e.g. spakfilla) or painting required MDF Panels: https://www.bunnings.com.au/easycraft-2700-x-1200-x-9mm-expressions-chevron-wall-lining-primed-general-purpose-mr-mdf-e0_p0034890?productName=easycraft-9-x-2700-x-1200mm-expression-chevron-primed-wall-lining-mr-mdf-e0&pid=0034890

I want my mdf board to cut as per my measurements for panelling my walls at home. Bunnings have limitations with the measurements. Can anyone please help me

I will buy Mdf board from bunnings, please help me cut the mdf board as per my measurements.

Building wall mount shelves in garage. Will fix wall brackets (attached photos) - will purchase MDF/plywood but will need help cutting them to size

I need to have a mdf board cut into strips. 8 pieces total. Board is 9mm Panel Standard 2400 x 1200mm. Need 2 x 111.5cm, 2 x 13cm, 4 x 135cm. All 10cm wide. I will draw out the measurements on the board.

I need 2 fine cut's of MDF using a table saw. Kitchen Cabinet.

jigsaw cut 2400mm x 1200mm MDF board. 12mm thick. Make 5 straight cuts at my home any time, wood supplied. Do it when in the area. Just off freeway/Derrimut. Odd similar type jobs to come sometimes, with no urgency, visit when passing, but with reliability most important; done at your place mostly. Must be local, as too much travel is to be avoided. Not looking for fine finish of a professional cabinet maker for most jobs...cant afford such skill, but doing it myself is not such fun anymore! And best not evaluated too closely!! ....but the item does get 'rough treatment' when used, so perfected skill is a waste of time anyway. - Due date: Flexible

Wanting MDF wall paneling for a feature wall approx 5m in length. Looking for vertical lines 100mm gap - Due date: Flexible

You supply MDF 12mm cut circle, 58 cm D. With 43 mm hole exactly in the middle. Must be well cut, not 'wavey' divets or irregularities. Offer is based on me picking it up, if you are local- Werribee area. Or we can talk later about you dropping it off, for extra No exact date required, but must have it by Nov 3 latest. If not the task will be of no use, so reliability is important. Will have other small 'wood' jobs later on, so a LOCAL guy is preferred. - Due date: Flexible

i have door that is (widthxheight) 88cm*204cm. I want to reduce the width to change the dimension to 68cm*204cm. - Due date: Before Monday, 22 August 2022