Find experienced hardwood flooring contractors near you

Light Sand and lacquer95m2 / 3 coats then stain 5 m2 new hardwood floor to match .

One of the flooring pieces are broken they need to be removed and replaced before the floors get sanded

Master bedroom approx 3 x 4m with significant termite damage to hardwood floors, skirting boards and door frame. Termites have now been sprayed and very minimal damage to bearing under wall, remaining structure is fine and on concrete stumps. Want floor covered in chipboard and then carpet (I can get the carpet done by someone else if required).

Need two spots on hardwood floor fixed

To replace existing hardwood decking with composite decking approximately 100 m² of decking around the house. Labour only

Needing a section of our kitchen hardwood floor relayed so they are all flowing in the same direction & needing a part of it levelled to be flush with the joining floor

We require a professional to sand and varnish the hardwood floors within our internal space (approx 100m2). The desired outcome is a lighter shade with a matte finish, potentially necessitating a whitewash treatment. Additionally, the exterior deck requires sanding and polishing (approx 35m2). We kindly request a comprehensive and genuine quotation for these services.

Looking for someone to sand our hardwood timber decking and the timber support posts on our covered outdoor area, back to clean bare timber ready for coating. What’s involved: • Deck: approx 50 sqm of hardwood (merbau/spotted gum), weathered and grey in patches — sand back to clean, smooth timber. Photos attached. • Posts: 4 timber support columns under the roofed entertaining area — sand back to match. fence appox 6 sqm

1st floor apartment in Williamstown with hardwood flooring. Has gaps and needs to be filled to reduce draft. Flooring needs to be sanded, polished and finished in a walnut colour. 2x bedroom, lounge room, small hallway and staircase

Wanting carpet ripped up and flooring to be laid in one room Open space living 5.1mx 3.6m as well as dining area 3.5m x 3.0 as per home plan attached

Hardwood polishing approximately 100 square meters

Sand and clear polish to floorboards as per floor plan attached. Total area highlighted in yellow requires sand and polish. Where I have added some blue lines is the area with wear and scratches the rest of the floor is in good condition. Floors are hardwood. House is empty of furniture and ready for the task.

I need a bedroom 3.7 m by 3.5 m and a kitchen 2.3 m by 3.5 m and a small patch of hallway need sanding and repolishing. The hallway and kitchen are clear but the bedroom will need furniture removed. The floorboards are in good condition and don't need specific repairs

- sand back and polish the floors of a Queenslander which recently had the carpet removed. 3 beds, kitchen and living room

100m2 approx hardwood floor sand and polish with semi gloss finish and 11 stairs

I need 78m2 of hard wood kwila t&g flooring sanded and finished ( water-based polyurethane matt)

Sand and varnish (matte) also 1 minor repair (as per photo of a gouge). Engineered hardwood oak matte finish. Hasn't been sanded before. Only a portion of the house 4.5x 3.5m approximately of the kitchen/dining area.

I have 9 sq m of hardwood flooring that needs to be laid over new sub floor. It's 12mm tongue and groove hardwood. I have the new boards. I'm after a professional carpenter/ flooring installer. You will need your own secret nailer. If you can sand and Seal too please let me know. Existing is poly matte finish.

We need floor sanding and coating of our hardwood floors, needs to be done on Friday 30th January. 45-50 sqm .

There are 2 marks on our hardwood floors that were made by a wet mop (that had a cleaning/disinfectant cleaning solution in it, Handy Andy). We are unsure on how to remove and are requesting offers by cleaners with experience with removing this type of stain successfully without any further damage. Please only make an offer if you’ve had experience removing marks like this. Thanks so much!