Find an experienced gas fitter in East Melbourne

Remove and dispose of the existing Rheem Stellar gas storage hot water system. Replaced with a Rheem 26L Gas Continuous flow water heater: 50c model The gas connection will need to be increased from the meter from Rp ½ to Rp ¾ The new system is to be located in the same position as the existing, resulting in minimal pipe work aside from lifting the gas / water pipe work by approximately 1.6m The gas pipe from the meter will need to be changed from ½ to ¾ diameter over a length of 5 meters. The photo shows that the surface to be opened is soil and stones. There are no obstructions making it easy to replace the existing Rp ½ gas pipe.

Remove and dispose of the existing Rheem Stellar gas storage hot water system. Replaced with a RheemPlus 295 gas water heater (Rheem Model Number 854295). Pipe insulation is important to reduce heat loss. Thickest closed cell foam suitable for outdoors is required for external pipes. Please specify the make and thickness in your quote. The new system is to be located in the same position as the existing, resulting in minimal pipe work. Further, it will fit the existing foot print and input pipe dimensions. Access is good. Your quote should include all costs and GST.

I need a licensed gas plumber to safely disconnect an old IXL gas heater from the gas supply (see photos). The job involves: • Shutting off the gas connection. • Disconnecting the heater from the pipe. • Capping the gas pipe so the area is safe. No disposal required — just disconnect and leave the heater in place. Location: Hawthorn Flexible with timing but would like it done in the next 1–2 weeks. Please only respond if you are a licensed gas plumber.

Cooktop gas regulator is inaccessible. Requires relocation to an easily accessible location in order to complete mandatory gas safety checks as per AS/NZS5601.1.

Gas fireplace is not lighting. Pilot light and fan both coming on but main fire is not. Needs a qualified technician.

I have a ducted gas heater attached to a unit in Burwood. Thermostat is located in living room. Turning it or and and adjusting the temp doesn't fire up the heater outdoor. Have tried power cycling unit with no luck.

Supply and install gas pipe from existing connection to gas pool heater. Distance of run is approximately 18 metres

Supply and install Flue Cap by certified gas plumber

Burner won't stay lit after releasing the ignition button. The stove top is the Fisher & Paykel 60cm Series 9 4 Burner Gas Cooktop and the issue is the largest burner. Looking for someone to come and fix please :)

Heater fan is not turning on, gas is working. Already changed capacitor and not working.

Existing open fire with grate Would like to convert to gas with logs. Believe there is a gas line in place under the house

Gas inspection and gas certificate of safety (only gas stove top and outdoor gas water heater) Need to provide certificate of compliance. Due date: Flexible

Heater has stopped working and need an urgent fix

Looking for someone to assemble this Bunnings Mimosa Outdoor Gas Heater. Comes in several parts.

Need to change heat pump hot water system to instant gas heating hot water system. And Burwood east located.

My Lennox g61mpvt gas heater can not restart after stop. i tried to turn off and turn on the power, the heater can work for a while, then after temperature reached to the setting, heater will stop and not able to restart again, and fan blows cold air. please quote . thanks

The pilot light on our gas heater isn't lighting. Looks like a thermocouple issue (maybe)

Small , silly to ask job but very important ! Our gas unit that works our heating pilot light is out . We need someone to pop in and relight it ( maybe show us while you’re at it so we can do it next time!) no idea how to do it but have had someone do this not long ago It’s literally a two minute job Thanks 🙏🏽

Stove top has not provide gas since moved in. Have tried gas valve for it several times but not work. The apartment has hot water though. Need a licensed plumber come to fix the issue.

Licensed gas fitter needed to disconnect and cap connecting gas pipe to free standing stove. In preparation for kitchen renovation.