Find professional garden shed repair in Brisbane

Assemble and install small garden shed. Requires fixing to concrete slab. Shed measures 1.5m x 0.8m x 1.8m high. Has a flat roof. Corner flashings to be fixed (as per image - black - below) I have just ordered this shed with manufacturing time between 5-15 days. Please provide quote with flexible installation date at this time.

Assemble garden shed. Prefer someone with previous experience with easyshed construction. Must have appropriate tools and drills. I will assist with holding sides.

New garden shed to be assembled 3x2.25m

New 4 m x 3 m garden shed assembly on an existing concrete slab

Erect an Absco 3x2.26x3m garden shed on existing slab. Old shed of same size has been dismantled and slab cleaned

I have a small 2.1m X .75m garden shed that we no longer need. Id love it dissembled so that it can be easily assembled again. If you can then transport it to mt ommaney & assemble it? I had two sheds recently built and the lovely guy said it’s easy to just unscrew roof as one piece & 4 sides. Would be ideal to have it done in school bourse but can be flexible eg if you want to come early tomorrow morning before I take kids to school to dissemble it, I can help & then you can take it to my ommaney to assemble?

Removal of existing garden shed shelving (see photo) patch any holes (no need to paint) and install new shelving (Flexmount - simple installation).

New half built small garden shed from Bunnings needs completion. 1520 x 780mm

Small Stratco garden shed (< 10 sq meters) needs pulling apart into sheets for subsequent removal before new concreting beneath

Install shed from flat pack Cheap Sheds Medium Shed 2.1m X 1.41m X 1.8m Garden Shed [Flat Roof] Require installation of a pool pumping enclosure shed around an existing pool pump. Pavers will have been laid for the base of the shed prior to installation of the shed. Power and electrical cords and wooden slats on the left-hand side of photos will also have been removed by the time the shed is to be installed. Shed needs to be attached to the paver base with masonry anchors (included in the flat pack) https://www.cheapsheds.com.au/cheap-sheds-medium-shed-2-1m-1-41m-1-8m-in-colour-steel-flat-roof.html Instructions: https://www.cheapsheds.com.au/media/manuals_pdf/CS_F64_CB.pdf

Looking for a wooden garden shed to be build to fit on a concrete slab already in place. The dimensions for the current shed are 1.7m x 4.5m x 1.95m. The existing shed will be removed by us. The slab is quite narrow so the widest is 1.6m (the existing shed does overhang the slab slightly) x 3m x 2.2m (high). I've also found some similar sheds with their specs so happy to discuss wood type and roof type. The shed will need a door or ability to lock it and a window for light.

Assembly of brand new shed delivery

Assemble an EasyShed 2.25m x 0.78m Off The Wall Garden Shed on an existing cement slab. Use silicon sealant to ensure water tight. Easy access for installation.

Dismantle, transport and reassemble garden shed. Potentially from Ormiston to Samford

Assemble steel garden shed on concrete. I would like it sealed to keep water out if possible.

Need Assistance building a flat pack garden shed (2.26 x 1.44x 2.00) https://www.bunnings.com.au/absco-sheds-2-26-x-1-44-x-2-00m-woodland-grey-regent-single-door-garden-shed_p3311447?store=7369&gad_source=1&gclid=CjwKCAjw1NK4BhAwEiwAVUHPUM71Tl23bKbrMz-l0s8h2avTWsAMSQVKSVuS6UbX_gb9S3WoJ4HIfBoC16IQAvD_BwE&gclsrc=aw.ds

The location is a courtyard with an alcove large enough to fit the 2.25 x 0.78x 1.82 shed. The floor of the courtyard is concrete with an epoxy coating. The ground has an uneven fall between 18mm and 22 mm, so the shed will need packing to stand straight and sealing to be waterproof. PDF Instruction Manual at https://www.manualslib.com/manual/3406002/Easyshed-Ef-S2308.html The manual says two people are required to install and I'd prefer a tasker with experience installing sheds. The budget on the next page is for installation labour. I'll pay for all materials.

Shed is partly constructed and needs finalising and placing onto existing concrete slab and fixing to concrete. Photos show how put together it is.

We have 2x ex office storage cabinets that we want relocated from our house to the garden shed. Cabinets are heavy - dimensions 1050x540 x 1200(h) mm Our property is on a slope and it therefore requires navigation of stairs and incline.

Install Easyshed shed from flat pack (in kit form). Timing changed to end August as materials not yet arrived.