Find a fence installation professional in Caulfield

We need a new arrow picket fence, with pedestrian gate and automatic sliding gate installed. Fence height 1500mm Approx Dimensions Total Width: 15m Fence Width : 11.5m Pedestrian gate: 850mm Sliding automated gate: 3.0m Currently has a small picket fence. The posts are in stirrups on the concrete footings. See photos attached. Can easily just change to be the correct height posts. Arrow pickets should be Kiln Dried hardwood timber, Kiln Dried treated pine plinth and rails. Automated sliding gate framed in galvanised steel Pedestrian swinging gate in galvanised steel large letter/parcel box to be incorporated and will be supplied by owner

We require a knock down rebuild of 1 street facing fence and 1x repair on the other side of the driveway - this will need onsite viewing before quote - insurance required - Caulfield location

Install new 6 cypress pine fence posts alongside existing posts. Buried to 700mm depth in cement. Offers must include all material. No waste removal cost required. Any excess should be piled in a designated location on site.

build fence a nd gate in caulfield , need some body with some experience , dig footings, install slat timber fence and gate.

Remove the existing fallen fence. Supply and install a new paling fence (similar to existing one). 3.70m length x 1.95m high

I need about 8 linear meters of piling fence supply and install. 2.1-2.2 m height

Paling fence and roller door needs to be removed and replaced with a new fence. Fence backs onto a laneway

Need a labourer to assist experienced glass pool fence installer 6th August 8am > 4pm no tools required, some experience is preferred

The post holding up the gate is rotted at the bottom. The post is attached to a brick wall. The gate itself is a metal frame and wooden slats. It’s also pretty beat up. We would like to replace it. We are open to suggestions as to what it should be. Current gate is 1880 x 751.

Timber boundary fence installed 10.2 M long and 1.8 M high. - Due date: Before Sunday, 24 December 2023

2 parts to the job: A- Remove and replace 4 fence palings (I have bought 5, they need to be cut down to size), working around old trunk on floor. B - Cut fence extension lattice (I have bought it) down from 1500mm length to 1120mm length and place on new part of fence. No need to paint - I’ll do that! - Due date: Flexible

to remove old gate and Supply and install new gates. Please state what materials will be provided. The price is just a number please ignore it. you can state your offer. Thank you. Thank you. - Due date: Flexible

remove, dispose old fence, replace with new paling fence, 20.3m long, 2.740m high, (9ft) - Due date: Flexible

Wanting a gate built and installed to the side of house (brick) with the latch connected to a wooden fence. Width of area: 1.5 m Height of gate: 1.2 m Picture of area where gate to be installed attached.