Find trusted local electricians in Little Bay

When switching on the garage light, an electrical fault occurred. Since then: * Some lights stay permanently on and cannot be switched off. * Some lights do not turn on at all. * Multiple light switches are affected. * Power outlets remain operational. Looking for a licensed NSW electrician to diagnose and repair the fault. Please quote for fault finding and repair. Property located in Little Bay NSW.

Supply and install LED strip lighting for 2x open shelves. * Shelf length: 1518mm each * LED strips can be surface mounted (no recess required) * Scope includes supply and installation of: * 2x LED strip drivers / transformers ( 2 drills in tiles) * LED strips * Aluminium channels * New 2-gang switch Please allow for full installation and connection of the lighting system.

Replace existing switchboard with a new, compliant unit • Install RCDs/safety switches for all circuits • Reorganise and clearly label all circuits • Check earthing and mains; advise if any upgrades are required • Supply all materials and components • Provide CCEW upon completion • Remove and dispose of old switchboard parts

I have a split system, the AC inverter/compressor is outside of my apartment at the rooftop of the building and I have the fan unit in my apartment. The AC is broken, it will not cool, showing error code 95, which from Fujitsu manual says permanent stop (compressor rotor position detection error). Model: ASTG30LFCC See attached images please.

I've just purchased a Redarc Tow-Pro Link Electric Brake Controller with USB Remote - EBRHX-ADH. I've done all the preliminary work of running the cables and mounting the sensor box underneath the car. I just need the 2 wires connected, I gueess the (blue and red) to the Erich Jaeger 7 pin towbar "vehicle specific" wiring harness. Most likely 10-15 mins work for some one who knows there stuff.

Towbar electrical wiring install. Towbar already fiited. Universal Wiring cables supplied. Kia Sportage AWD Diesel 2020

Downstairs air conditioning unit not working. It’s an issue with the inside unit as the compressor still operates when upstairs unit is turned on. At this stage want a diagnosis of system. If it can be repaired without parts. Happy to be quoted extra. Access is through two service hatches. But unit should be able to be removed through the bulkhead grill, if necessary. Access and parking is good, but a first inspection is needed to diagnose issue and quote if repair and parts are needed.

Install air conditioning system.

Replace Electrical Plug.

Plumber Check the water heater

Main switch short circuit power off and got a burn wire.

The ceiling fan needs to be installed in the bedroom. It has a light and a Remote. It is a Grange 1300 mm Mercator RF. I have the required globes - 2 X OSRAM LED 10W - Due date: Flexible

Front load WM and heat pump dryer are stored in storage cage of car park. They need to moved into unit and installed. Lift, Level access no stairs. - Due date: Needs to be done on Tuesday, 26 September 2023

Need two pendant lights changed over in our kitchen. Currently have dimmable pendant lights installed, just need them changed over to new dimmable pendant lights (black). See photos attached. - Due date: Flexible

Need a new power point installed for the laundry as the current one is too far away from the machine - Due date: Flexible

I need plumber with electrical skills to install 250L EnviroHeat hotwater heat pump to replace my existing Stiebel Eltron heat pump. Your job is to disconnect wiring from clipsal junction box and connect new wiring into the junction box and seal it from water. It has to be done professionally. You will install a tempering valve which I will supply and weld copper pipes supplied by yourself. You shall retrofit existing copper pipes into the new heat pump. I pay $10 for call out fee to cover your petrol. Another $20 for your copper pipes on job. Another $250 cash on the job for labour. It shall take 1.5hrs to complete if you are experienced. Price will include to fix my leaky shower taps i.e. change washers. Only plumbers with experience installing water heat pump apply. - Due date: Flexible

I need an electician to dis connect from old water Stiebel heat pump into the new Enviroheat hotwater heat pump into the clipsal shown in photo. The clipsal wire goes into the hole into the laundry room. The heat pump wire goes to connect into clipsal device on the wall. A plumber will be there to install the pipes. $10 for call out fee. $70/hr on spot. - Due date: Needs to be done on Wednesday, 8 March 2023

I have 7 light fittings that need to d changed over - Due date: Flexible

Stiebel Eltron heat pump has no hot water. No condenser water is coming out. Fan and compressor is running smoothly, I spoke to hot water expert and he says it needs regassing or a leak in the compressor. The unit is approx 6 years old. Can you help with the cheapest or cost efficient repair? - Due date: Flexible

My plumber says to get a refrigerant guy to re gass the compressor in water heat pump. There is no hot water due to leakage of refrigerant in compressor. - Due date: Flexible