Find a professional downpipe contractor in Sydney Eastern Suburbs

I need a section of gutter and a down pipe replaced plus a small section of facia

Need a colourbond down pipe installed. Happy for it to run to pavers

Replace the downpipe (Dover White), approximately 3.2 meters long, on a two-story house. I only need to replace the bottom section, which must slot into the existing downpipe. The current downpipe measures approximately 106x55 mm. I attempted to use a 100x50 mm downpipe, but it doesn’t fit. I need you to supply a downpipe that is 106x55 mm at the top, transitioning to 100x50 mm at the bottom to fit into my stormwater connection, and install it by slot in to the top part and connect the bottom one to the storm water.

Supply and install Downpipes top level needs to be Removed the bottom are Removed then install PVC pipe with all fittings.

Required qualified plumber to connect 2 downpipes to new stormwaterline run to pit. No digging required

I am seeking a licensed plumber to do some bathroom work. **Please confirm that you are fully licensed before responding.** All items are supplied. Job list includes: 1. Remove old shower head 2. Install new twin shower head (back plate and shower head supplied) 3. Remove two rusted basin taps 4. Cut down old copper wall pipes 5. Install wall stops (stop cocks and flanges supplied) 6. Install new basin mixer tap (supplied). You’ll need to bring your own tools and may need to supply incidental materials eg. plumbers tape, connectors for pipes/stops, etc. I might ask some questions/advice about possible additional work - potential for future jobs down the track. Let me know if you have any questions, thanks!

Need qualified plumber to replace old down pipe I had an electrical fuse box replaced but the electrician has to move it closer to the wall, which meant he had to cut the down pipe off. Need new downpipe. Happy to pay $200 + materials

Terrace house has 4 metre section oc guttering that needs replacing due to rust and also replace a leaking/blocked 7-8 metre section of downpipe and check thag there is no blockake between pipe and roadway.

Hi, need repair or replacement work done for down pipe elbow

I have a balcony with 3 drainage holes in the side that I need hooked up to the downpipes. There is one already with a downpipe but that one needs to be removed and then the 3 holes all hooked up to the downpipes further back. One of the downpipes has a piece missing that also needs to be supplied and connected. Please ensure your offer includes all labour and parts

Downpipe is leaking significantly when water goes down it. Has been cleared of debris. Needs patching or more likely replacement

Reattach the downpipe and add a piece so rain flows properly onto sideway and not splash into basement. Kind of a rush job if this rain keeps pouring. The downpipe has a rounded oblong x section. Red outline in photo is downpipe on the ground, yellow outline is where it should be. :-P

Change downpipe to 90mm Gutter overflowing need to change the down pipe to 90mm. Material can be provided. Handyman welcome.

Remove about 5-6m of tin guttering and two downpipes. Replace with PVC (ideally wood/sandy coloured) in same configuration as is currently in place, join all pieces and fix to structure. Originally posted on Airtasker as a repair but I've come to realise that it just needs replacement.

Fix gutter downpipe per photos. Pipe appears to be 75mm in width. - Due date: Before Sunday, 18 February 2024

I need four colourbond roofing downpipes repaired and a solar pool heating system taken off the roof - Due date: Before Thursday, 29 February 2024

Repair drain pipe on shed which has rusted through. Will require procuring relevant parts and fitting. Downpipe is 75mm in diameter - Due date: Before Sunday, 28 January 2024

I need someone to bring a replacement angled part of the downpipe, paint it with some paint I have and replace the rusted bit. Two story terrace. - Due date: Before Monday, 8 January 2024

Downpipe has rusted through on our terrace balcony. Access is relatively easy from the balcony and the new downpipe needs to be fitted into existing guttering. All equipment and materials need to be supplied.

Trim existing 1.8m steel gutter (or supply new), supply and fix end cap and down pipe fitting and PVC downpipe. - Due date: Flexible