Find experienced local carpenters in Windsor QLD

4 meter x 2 meter area. Stainless cut and fixed to the wall and siliconed

I need 4 x new fascia boards (i assume this is what they called, highlighed in green) installed and painted.

Update: Please submit complete offers for labour and materials. The Airtasker fee is $50. Note the deck is easily accessed through bifolds and only 7m x 3m. Timber needs sanding and staining/varnishing.

Just after some simple shelves to be built in our cupboards as there is only hanging room. After a quote for materials & labor.

Install the following product over the front of Acrylic surface on front of desk (see image). https://www.stickontiles.com.au/collections/wood-rolls

I’m literally after the IKEA Kallax shelving with the base. But just built with much better materials, still being black and preferably some sort of backing/brace. I’d probably need 3 or 4 separate units built also. Link: https://www.ikea.com/au/en/p/kallax-shelving-unit-with-underframe-black-brown-black-s89443952/ Not fussed on the underframe looking exactly like that, would just prefer to have the records raised from the floor a bit. Don’t need it done tomorrow but ASAP would be super appreciated! Shelves need to be delivered to Windsor, Brisbane.

I need an experienced woodworker or handyman to build two (2) small and one (1) medium wooden frame to fit around cardboard dog potty trays. I will provide all the materials, tools, and equipment—you just need to cut, assemble, and finish the frames. No intervention from me; I just need the job done accurately. Key Details: Frames to Build: 2 × Small Frames (67.5cm × 43.5cm) 1 × Medium Frame (87.5cm × 63.5cm) Materials & Tools Provided: ✅ Timber (pre-purchased, you will cut to size) ✅ Mitre saw (for straight cuts) ✅ Brad nailer & nails ✅ Wood Gorilla Glue (for reinforcement) ✅ Wood filler (for covering brad nail holes) ✅ Stain (for finishing) ✅ Sander (to smooth edges) ✅ Rags & gloves (for stain application) Skills Required: Must be experienced with woodworking Ability to measure and cut accurately Experience with assembling wooden frames Basic finishing skills (wood glue, brad nailing, staining, sanding)

Builder advice & repairs required for damage completed to wooden floorboards. Photos attached for your reference.

Sand and Stain Merbau Decking Approx 8 meters square. Ground level. LED lights pop out to protect them. Last done 24 months ago. Photos attached. Task to sand, apply deck clean and apply 2 coats of Merbau Decking Stain. I can purchase/will supply the deck cleaner and stain so please quote without that cost. Be great if you can supply any other tools / brushes etc. Happy to be flexible on time for multiple visits if easier while drying over a few days etc

Hi I need some cabinet doors replaced two missing in total and some draws fixed please

Hi There is a broken timber strut, that connects middle of the roof to the concrete at the bottom. I think it 100x 100mm timber of height 2.4m. Please quote for the installation. I can get all the materials from Bunnings. Thank you

Replace approx 170lm of timber weatherboard with fc weatherboard and 2 window sills

Removing existing single drawer dishwasher. Modify the cabinet by removing the cabinet drawer under it to place a new free standing dishwasher.

We are after someone who can give our verandah and deck a light sand and couple of coats of stain. Approx 32m2 over 2 areas. See pic for dimensions and back deck area. Don’t have photos of veranda

I need a new decorative piece turned for an Ed Rosenstengel sideboard that has been damaged. About a foot long and 2 inches wide. It’s half-cylindrical so would’ve been made and then cut in half. Would be great to get two if I can. Not very complicated for a pro. Must be silky oak.

Looking for someone with carpentry experience to build a wooden type or feel stage/flooring around my dance pole (x pole lite stage) so I have a smoother finish and more floor room to work with. Would like it to have a sloped edge to give it a nicer finish and for safety with less chance of bumping into it day to day. Will need to be able to be dismantled and put back together again incase i need to move or dismantle or transport my pole. Needs to be at-least 2mx2m but maybe more. Current base (which must remain) is 1.6m in diameter and 11cm. There are hex screws that must be accessed at the base of the pole to change the settings as well. No idea what the cost to do this would be so put a random number down. Carpenter Builder Flooring Cabinet maker - Due date: Flexible However looking to get it done as soon as possible :)

I have an area in my kitchen where I want a super basic shelf system built. Happy for you to come and have a look and quote prior to booking. I have put price low till we work out costs. Also I have found when you put a price almost every offer is a lot more then budget so went low

The bottom rung of the verandah railing is rotting from water damage and needs replacing and some slats as needed(approx 8 metres).It is in 4 sections measuring 2235mm, 2260mm, 1840mm, and 1920mm. The top banister is in good condition as are most of the vertical slats. Plus 2 wooden sash windows with the plastic tubing no longer stay up when opened. - Due date: Flexible

Carpenter needed to install locks, remove casement windows, install VJ sheeting, install a few chamferboards, install breezeway, skirting etc…. Can start asap in Windsor. - Due date: Flexible

We would like to stain this church pew a darker colour to match the rest of the house. Solid timber Dimensions: 285 L x 50 Dx 90 H Location: Windsor