Find experienced local carpenters in Fig Tree Pocket

I’m looking for an experienced carpenter or handyman with good timber repair experience to repair a timber privacy screen at the front of my house. The screen is approximately 2 metres wide × 2.2 metres high. The horizontal privacy slats are generally in good condition, so I would like to retain and reuse them rather than replace the entire screen. The main issue is deterioration/rot in the structural timber frame, particularly the top horizontal rail, bottom horizontal rail and one side frame. There is visible rot at the end of the top rail where it meets the wall. Work required: Remove and replace the deteriorated top rail, bottom rail and damaged side framing. Reuse the existing horizontal slats and any other sound timber wherever possible. Use suitable exterior-grade treated timber Match the existing timber dimensions and overall appearance as closely as reasonably possible. Use appropriate exterior-grade fixings. Prime/seal all replacement timber, including cut ends and joints, to help prevent future moisture damage and rot. Pay particular attention to the area where the timber meets the wall and make sure the replacement is properly protected from water penetration. Leave the repaired screen straight, secure and ready for final painting. Remove and dispose of the damaged/rotted timber. Photos are attached showing the screen and the damaged areas. Please provide a quote including labour and materials.

Left side stringer is rotted in bottom area and sank slightly. The bottom step and bottom post need replacement . I would like a carpenter come and measure the needed material , buy them and make and install everything back to original. No need to paint .

Stringer is rotten. One side stringer, one step and hand rail and post need replacing. All wooden parts purchased. Just needs cutting to the size and installation

I need to replace doors and drawer from panels only of a kitchen and hardware

We have a small deck at the rear of our yard that is rotting and boards need replacing. Structurally sound underneath. Size approx 2.1m x 4.8m

Two shower pans need refinishing

I want to have some sort of cover over my cooktop. The dimensions will be roughly 910 mm x 550 mm with a depth of roughly 40 mm I am thinking of made from marine ply or stainless steel. The box should be sturdy enough to take the weight of approx 10 - 15 kg.

Looking for someone handy to put in a wooden handrail at the front entrance with one step. - Due date: Before Friday, 3 November 2023

1. Entry door needs to be sanded and re-stained 2. Staircase needs a fresh coat of stain - Due date: Flexible

After a tradie or carpenter or handyman to replace some timber boards that are starting to bounce….the width of the boards are that of a walkway and need approx approx 10-15 boards cut to size and nailed in at same measurements that are there - Due date: Before Friday, 20 October 2023

Due to rain we have changed this date to 630am Saturday We don’t need deck experts for this. It is a labouring job. Remove timber deck with help from A carpenter Easy access 33m2