A close-up image of a carpenter sanding a plank of wood representing carpenters near me.
A close-up image of a carpenter sanding a plank of wood representing carpenters near me.

Find experienced local carpenters in Blacktown

Fill a short form and get free quotes from local carpenters in minutes

4.2

Great rating - 4.2/5 (11114+ reviews)

Hire carpenters in Blacktown today

  • Cabinet making
  • Custom shelving
  • Wood repair
  • Custom made furniture
  • Deck sanding
  • … or anything else
It only takes 2 minutes. And it’s free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated carpenters near me

Recent Carpentry reviews in Blacktown

It was super easy with Peter. He completed the job perfectly and in time. Extremely happy.

Replace rotten timber in bathroom

$1,500

Very easy to work with

Fixing roof timber fascia

$1,500

Good knowledge and was very helpful. He knows how to make cabinet look good and was on time.

Build a cabinet

$10

Mark was very professional and great to work with. New exactly what he was doing and tidied up after himself. Will definitely recommend and use again for future jobs. Thanks so much!

Install disassembled kitchen cabinets

$350

Good tradesman, plenty of skills

Carpentry work

$250

What's the average cost of a carpenter in Blacktown

$70 - $354

low

$70

median

$180

high

$354

Low, median and high bar chart distribuiton

Average reviews for Carpentry Services in Blacktown

based on 130 reviews

4.93

126
2
0
1
1

Best rated joiners near me

Recent Joiner reviews in Blacktown

Excellent and great jobby Anil

Need a joiner or carpenter to fix my sliding door as shown in the pic

$150

Amazing work and every little request was taken care of

Joinery Removal and putting one Kitchen cabinet door

$120

Good work , reliable

Need a joiner/cabinet maker to supply and install vanity doors x 3

$350

Ben was amazing and did a great Job with the Joinery

Shop joinery and fit out

$10

Mark is excellent — patient, experienced, and smart. He understood the installation manual right away, pays great attention to detail, and is very easy to work with.

Joinery Job – Rouse Hill NSW

$50

Mark is amazing! He fixed my bar table exactly the way I wanted! Highly recommend him!

I need a joiner/carpenter to shorten table legs

$100

What's the average cost of a joiner in Blacktown

$30 - $230

low

$30

median

$150

high

$230

Low, median and high bar chart distribuiton

Average reviews for Joiner Services in Blacktown

based on 6 reviews

5

6
0
0
0
0

Best rated under stair storage builders near me

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

188+

Tasks successfully completed

2

Average amount of offers per task

57

 mins

Average time to receive offers

What do carpenters near me do?

Whether you’re planning a major renovation on your home or you simply want to make things look a bit nicer, hiring carpenters near me for small jobs or chippy can help you with many different tasks. Carpenters use other types of power tools and hand tools to carry on building and construction work. 

Carpentry work is generally broken down into two types: rough and finish. Rough carpentry refers to work that doesn’t have an intricate look, as it’s covered up – often by bricks, tiles, or plaster work. Finish carpentry covers the work that will be on display, so needs to have a nicer finish. Furniture, decking, and window frames all fall into this second category. 

Carpenters for decking

Many Australian homes are blessed with a large backyard and plenty of sunny hours to enjoy that space. A decking specialist can add an outdoor deck or upgrade an existing one that opens up your outdoor space. This is great if you want to entertain guests or eat outside as a family during the sunny months. 

Carpenters for cabinet-making

Cabinet makers are one example of finish carpentry, because of the high level of detail that goes into their end products. Unlike structural work, it’s important that a cabinet looks nice, so this type of carpenter is a lot more focused on fine details. Cabinet makers often specialise in other forms of furniture making too. 

Refinishing carpentry

While structural carpentry is concerned with jobs on the large end of the scale, trim or refinishing carpentry looks at jobs like wood staining and removal of old finish. A trim carpenter is the way to go if you want someone to fix up your skirting boards, cornicing, or a similar aspect of your home.

Custom made furniture

A house isn’t a home without a few personal touches, and if you’d rather avoid the cookie-cutter Ikea approach to decorating your property, hiring a carpenter to create custom-made furniture can make you stand out. Whether you want chairs, tables, or a shoe rack, or even kitchen installation there’s someone nearby who can help. 

Joinery carpenters

Joinery services encompass the craftsmanship of creating and joining wood in workshops, distinct from on-site carpentry. These services range from bespoke projects to crafting timber buildings, emphasizing precision and passion. Joiners play a crucial role in interior woodwork, window and door production, and specialized construction, offering tailored and quality timber solutions.

Recent Carpentry tasks in Blacktown

Supply and CNC-cut plywood into a 2.5 m circle in two halves Sydney

$250

Marsden Park NSW 2765, Australia

11th Nov 2026

Hi, I’m looking for someone Sydney-based with a CNC router to cut the plywood top for a portable wedding platform. * Two equal semicircles that fit together to form a 2,500 mm diameter circle * Each half measures 2,500 mm along the straight edge and 1,250 mm at its deepest point * 18–21 mm structural plywood preferred. Open to your recommendation. * Smooth, accurately cut edges suitable for painting The job is for cutting the two top pieces only. Please quote for supplying and cutting the plywood and, if available, cutting only if I supply it. Please also confirm your CNC can handle the required dimensions and let me know your turnaround time and pickup suburb. Thanks

Fix split wooden exterior eave/soffit trim

$100

Blacktown NSW 2148, Australia

10th Nov 2026

Looking for a handyman to repair a small section of wooden finishing trim just above my front entrance door. • The Issue: The wooden trim panel has split, warped down, and pulled away from the ceiling line (see photo). There is also external black residue on the brickwork that needs a quick wipe down before fixing. • The Issue: One of the vertical grey riser tiles on my front porch step has completely detached (see new photo). The main tile above it also has a minor corner crack. • The Task: Scrape off the old dried adhesive from the back of the loose tile and the concrete base, glue the tile firmly back into position using a strong exterior construction or tile adhesive, and seal/grout the gaps to match the surrounding tiles so water can’t get back behind it.

Restain Front door and door jamb. Will need you to colour match.

$300

Quakers Hill NSW 2763, Australia

9th Nov 2026

Will need door and door jamb to be sanded (assuming), and restain to match existing colour.

Replace existing 60cm stainless steel 4 burner gas cooktop

$50

Quakers Hill NSW 2763, Australia

9th Nov 2026

Replace existing 60cm stainless steel 4 burner gas cooktop. Please quote for install charges ,gas cook top will be supplied

Make wooden steps on my front door

$500

Riverstone NSW 2765, Australia

5th Nov 2026

I need a four or five steps for my front door leading to the entrance.

Handyman - general carpentry

$150

Marsden Park NSW 2765, Australia

5th Nov 2026

Hello, Looking for an experienced licenced carpenter to help build 2 box covering under floating vanities in bathrooms. Measurement: (200mm width x 800mm length x 400mm height). And installing villaboard over it. Location: marsden park - 2765 Thanks

Fixout carpenter.

$550

Rooty Hill NSW 2766, Australia

4th Nov 2026

Fixout carpenter for some eaves, installing couple doors. Etc. mostly architraves and eaves today. On going work available. This is for the day.

Teach woodworking

$100

Riverstone NSW 2765, Australia

3rd Nov 2026

I want to learn woodworking, I have no tools and I’m a beginner with zero knowledge. I have some projects I’d like to do and would be great to learn from someone while doing it. I could assist you in building and mounting, say a folding table for instance. Happy to buy material required.

Fix-out carpenter

$65

Whalan NSW 2770, Australia

3rd Nov 2026

Fix out carpenter required for doors and architraves. Ongoing work for the right person. Price is per hour rate paid.

Cabinetry work and put slider door on walkin wardrobe shelves

$100

Grantham Farm NSW 2765, Australia

2nd Nov 2026

Need to put a cabinet in a blank buffet space 1460x600mm. I have a design attached in photos. Also need to put some doors on the walkin wardrobe.

Reduce the height of the cabinet above the fridge cavity by 20–50 mm

$10

Colebee NSW 2761, Australia

2nd Nov 2026

Reduce the height of the cabinet above the fridge cavity by 20–50 mm, by taking our the cabinet from the wall. Let me know the best/easy way this can be done. Open for ideas.

New bar cabinets, kitchen cabinet doors

$3,000

Marsden Park NSW 2765, Australia

31st Oct 2026

Build new bar cabinets ( 260 height, 220 length, , 28 width Cause) Replace existing kitchen timberis doors , panels with fluted panels in the kitchen Attached before and expected after work images

Looking for an experienced carpenter to repair two sliding wooden door

$120

The Ponds NSW 2769, Australia

31st Oct 2026

Looking for an experienced handyman to repair two sliding wooden doors. One door has come off its track and needs to be put back in place. The other door is getting stuck and does not close properly. Need someone to fix both doors to ensure they slide smoothly and close properly. Please provide a quote.

Carpenter

$250

Plumpton NSW 2761, Australia

30th Oct 2026

We are planning to transform small linen cupboard into puja/worship place. I will send you the picture of linen cupboard. Wooden panel has to be placed on the wall, led light has to installed, small floating shelves has to be fixed. Small storage cupboards goes at the base.

Carpenter needed urgently

$300

Marsden Park NSW 2765, Australia

30th Oct 2026

Door replacement installment and external frame fix

Customer door setup for cabinets

$150

Riverstone NSW 2765, Australia

27th Oct 2026

Custom door setup cabinet

Joiner/ cabinet maker / carpenter

$300

Minchinbury NSW, Australia

27th Oct 2026

Working in joinery shop, doing timber trims and prepping / sanding timber doors

Carpenter - Need cupboard base raised

$100

Glenwood NSW 2768, Australia

28th Jun 2026

Need the base and flap doors of this pantry cupboard raised by 5cm to fit a fridge underneath

Kent did an amazing job Was on time and polite Very happy and will call again

Build shelving in my storage unit

$150

Rouse Hill NSW 2155, Australia

29th May 2026

Need someone to assemble my storage unit shelves. I have 2x of them, 4m x 2m shelving units and need someone to assemble them for me

Easy to work with and does good work

Experienced Carpenter

$50

Seven Hills NSW, Australia

26th May 2026

Need an experienced carpenter tomorrow to assist with residential renovation work. Basic carpentry etc. Hourly or day rate. Cheers 👍🏽

Hardworking bloke & very easy to work with. Highly recommend Coilin & his expertise. Cheers mate

Recent Joiner tasks in Blacktown

Joiner/ cabinet maker / carpenter

$300

Minchinbury NSW, Australia

27th Oct 2026

Working in joinery shop, doing timber trims and prepping / sanding timber doors

Kitchen joinery handyman

$100

The Ponds NSW 2769, Australia

19th Sep 2026

Mounted Pullout tiwn bins slides broken, need replacement of slides which I’m unable to find in Bunnings.

Cabinet joiner

$2,000

Rouse Hill NSW, Australia

31st May 2026

I’m ordering some wardrobes and kitchen from China and looking at a joiner who can Attach I need to attach kitchen , wardrobes , laundry

Shop joinery and fit out

$10

Rouse Hill NSW, Australia

26th May 2026

Semi retail warehouse kind of shop having a lower floor and mezzanine floor needs basic shop fit out on both floors without the need of any private certifier.. see sample design

Ben was amazing and did a great Job with the Joinery

Cabinet maker / joiner

$300

Minchinbury NSW, Australia

13th Apr 2026

Need a Joiner for in the factory building cupboards, building doors

Fix outer cladding joineries

$150

Rouse Hill NSW 2155, Australia

1st Apr 2026

Joineries on the 2nd floor of our house appear to be loose/sliding out. Will need someone who has a high enough ladder and experience to come in and fix it. Issue is from 2 sides of the house. Majority is at the back of the house where the first floor roof can be used to reach it The 2nd side is on my neighbors side, and a higher ladder is needed, as it will need to come over the fence in between my neighbor and our house

Need a joiner or carpenter to fix my sliding door as shown in the pic

$150

Quakers Hill NSW, Australia

19th Mar 2026

Door is not closing properly, gap in the glass and frame and not sliding properly

Excellent and great jobby Anil

Cabinet maker/ joiner

$300

Minchinbury NSW, Australia

18th Mar 2026

Cutting, edging , building cupboards

Need a joinery work

$500

Kellyville Ridge NSW 2769, Australia

14th Mar 2026

Need a experienced person who can do some joinery work

Joiner/ cabinetmaker

$300

Minchinbury NSW 2770, Australia

2nd Mar 2026

Working in factory building kitchens, wardrobes, vanities, cutting on cnc , edging

Have an outdoor kitchen set bought but need joinery

$250

Ropes Crossing NSW, Australia

15th Jan 2026

I have ordered an outdoor kitchen and need someone to inspect to advise if able to install and cost quote

Joinery for study nook

$200

Schofields NSW, Australia

29th Dec 2025

Please make study nook with open shelve on the top

Simple joinery work

$250

Rouse Hill NSW 2155, Australia

13th Dec 2025

Need shelfs to be fixed in the storage area under the stairs for pantry items as sell as fix floating board in the kitchen below the cabinet

Lino joiners fixed redone

$400

Dharruk NSW, Australia

25th Nov 2025

The metal strips that connect the different part has been done poorly and I need them redone. I also need this done for 3 bedrooms that’s hasn’t been done at all

Handyman , Joinery Timber slats , timber cladding , Wall partitioning

$500

Nirimba Fields NSW, Australia

22nd Nov 2025

I need to get some renovations done to get partition done in my home formal room . the room has open layout .. Need to get a proper partition using wooden slats or wall there

Custom cabinetry/joinery

$70

Marsden Park NSW, Australia

20th Nov 2025

Custom cabinets for Kitchen heavy duty and the other one for the island table

Assistance finishing a joinery job in Rouse Hill

$1,000

Rouse Hill NSW, Australia

17th Nov 2025

Assist joinery manager in closing out project. All material and tools on site, joinery manager on site. Below is what needs to be completed, but you would be assisting the joinery manager. - Eyebrow mould CFC installation. - Fixing of screw patches. - Completion of walls above the cleaners' cupboard. - Installation of access panels. ) - Completion of autodoors, glazing, and the night pay window. - Removal of CFC sheets from the roof. - Installation of door hardware - new door edge trim

Kitchen joiner or handyman

$250

Toongabbie NSW, Australia

2nd Nov 2025

Need a skilled relible kitchen joiner or handyman to install a dishwasher. Remove existing drawers, cut cabinet door as needed, and fit the dishwasher neatly and tidily. Please provide competitive quote.

Custom joinery

$4,000

The Ponds NSW 2769, Australia

2nd Oct 2025

Please see attached diagram. That is to build a custom joinery in a space that’s 3.2m wide by 3m high. Depth required 50cm. On one corner of space there’s an ac vent covered with gyprock wall. Which is 35cm wide. That can go inside joinery. But will be behind the tall cabinet accessible when required. Aesthetically the final product to look like in reference pic given( color and finish)

Joinery Job – Rouse Hill NSW

$50

Rouse Hill NSW 2155, Australia

30th Sep 2025

Looking for experienced joiners/carpenters for a job in Rouse Hill on 9th October. Work includes: 1. Removing the timber frame in the first picture (red-marked area). The blue-marked load-bearing column stays. 2. Removing gyprock (see second picture). 3. Installing a customised under-stair storage cabinet. The cabinet parts are imported from China. What we’re after: • Someone has done similar customised joinery jobs before and it will be perfect if you can read Chinese installation manual, • Must have own tools and experience. • Please send through photos of similar work you’ve done. Job estimate: 2 people for about 2 days. If you’re available and interested, please get in touch.

Mark is excellent — patient, experienced, and smart. He understood the installation manual right away, pays great attention to detail, and is very easy to work with.

Recent Under Stair Storage Builder tasks in Blacktown

Carpenter / Cabinet Maker - Build Under Stairs Storage

$10

Colebee NSW 2761, Australia

8th Mar 2026

Looking for an experienced carpenter or cabinet maker to help design and build custom storage under our staircase. When we knock on the wall under the stairs, it sounds hollow/empty, so we believe there is usable space there that could be converted into storage. We are thinking of two storage sections: - Shoe cabinet on one side - Bookshelf / general storage on the other side I shared photos of the area to give a better idea of the space. Also, references for the storage of what we are thinking. What we need: - Advice on the best way to open and utilise the under-stairs space - Help with design ideas - Build and installation of the storage units Additional details: - Measurements will be provided - Happy for you to visit and quote if needed - If possible, please share photos of similar work you’ve done It would also be helpful if you could provide a rough cost range or estimate based on similar projects before inspection, just so we can understand the typical budget. If the work goes well, we may also have future carpentry projects, such as built-in TV shelving or other custom storage. Thanks!