Find an experienced cabinet maker near you

Need a cabinet installer to install cabinets in laundry.

I would like my pantry removed & replaced with a corner pantry. I would also like a cabinet built to accommodate my washing machine & laundry basin. I would like a door installed for my bathroom & maybe my front door replaced. I would like some advice about my options for the doors.

Kitchen Island Timber Slat Modification (Cabinet Maker/Carpenter) Hi, I’m looking for an experienced cabinet maker or carpenter to modify the decorative timber slatted surround on my kitchen island. The current curved front projects too far, preventing chairs from tucking underneath comfortably and reducing legroom. It also makes it more difficult to clean inside the open shelf. I’d like the decorative slatted surround to be modified so the front is flat or has a much gentler curve, while keeping the stone benchtop and existing internal support structure unchanged. If possible, I’d like to reuse the existing timber from any slats or curved rail that are removed so the finished result matches the existing timber as closely as possible.

Cabinet making duties include unloading the vans onsite, cover screws with caps, clean doors.

I am looking for somene who can do laundry cabinets to execute the design and layout I want for my existing laundry.

Timing: To be completed by end of August Availability: Time and days to be confirmed upon communication I’m seeking an experienced cabinet maker to design, supply, and install internal shelving and storage solutions for an existing built-in wardrobe. The project involves creating a functional, well-finished internal layout, including shelving, drawers, and hanging space, tailored to the existing wardrobe dimensions. Wardrobe Measurements: Width: 2080mm Height: 2460mm Depth: 460mm (Final site measure to be confirmed by contractor) Scope of Work: Design a practical internal wardrobe layout (shelving, hanging rails, storage as required) Supply all materials, fittings, and hardware Professional installation with a clean, level finish Removal and disposal of all packaging and rubbish after installation Requirements: Proven experience with built-in wardrobes or cabinetry Ability to design solutions to suit an existing space Strong attention to detail and quality workmanship Photos or examples of previous similar work preferred This task is to obtain a quote from a cabinet maker, with the potential to proceed with the work if the quote is suitable.

I am a Ndis Provider and my Respite facility with Clients live the bathroom vanity needs to be fixed

I'm looking for an experienced cabinet maker or carpenter to complete a couple of custom cabinetry jobs in my one-bedroom apartment in Waterloo, Sydney. Job 1 – TV Unit I've purchased two Temple & Webster TV units that will sit side by side as one long entertainment unit. The combined length is approximately 200 mm too long, so I'm looking for someone who can: Assemble both flat-pack TV units. Modify one cabinet by trimming approximately 200 mm from its width so the combined unit fits the space. Install a timber top across both units to create one seamless entertainment unit. Scribe the finished unit to the wall where required for a built-in appearance. Optional If possible, I'd also appreciate help concealing the TV cables inside the plasterboard wall behind my wall-mounted TV. If this requires an electrician, please let me know. Job 2 – Integrated Fridge Door I'd also like to create a built-in look for my kitchen by installing a cabinet-style door in front of my existing fridge cavity. The fridge opening is 850 mm wide. I'm looking for someone who can: Recommend the best approach. Supply or advise on suitable materials (or I can purchase them). Install and align a door to achieve a clean integrated appearance with the existing cabinetry. Location Waterloo, NSW. Please include Photos of similar cabinetry or custom joinery work. Confirmation that you're comfortable modifying flat-pack cabinetry. Whether you can supply the timber top and fridge door, or if you'd prefer I purchase the materials. Ive attached an image of the fridge cavity that id like to hide, an image of the basic tv units I bought and a mockup of how im hoping the final piece would look like.

Hello, I'm looking for someone with experience in cabinetry, built-in wardrobes or joinery to finish an IKEA PAX wardrobe install to make it appear built in and a tidy finish. Scope of works 1. Install infill/filler panels • Fill the gaps between the wardrobe and the side walls with 16mm MR MDF. • Scribe the panels to the walls where required so everything sits flush. • Ideally use moisture-resistant MDF or similar ready for painting. 2. Install a kicker/plinth board • Cover the existing timber base with a neat kicker/plinth with either 16 or 18mm with 16mm MR MDF. • Continue the plinth across the full width so it appears built in. • Minimise visible joins. 3. Finishing • Light sand and prime final cut and fitted pieces • Colour match GRIMO door at Dulux trade centre • Ideally, paint with low sheen Dulux Aquanamel and using high-density foam roller to achieve sprayed-looking texture • Finish neatly against the existing skirting boards and also IKEA base (may require some filling of gaps above plinth / kicker) • Caulk as required. Notes • Wardrobe is already fully assembled and secured. • Photos attached showing the areas to finish. Please only apply if you've completed similar built-in wardrobe or cabinetry work. Photos of previous jobs would be appreciated. Cheers,

I have 2 wardrobe recesses. 1 master and 1 small recess. For now I just need a hanging shelf in both. White 20ml thick shelf? with pine wood supports underneath and a heavy duty silver pole. I will pay for materials extra. Other work available 😊

Cabinet Maker Needed to Adjust Kitchen Cabinetry for Stone Benchtop Realignment Looking for an experienced cabinet maker to inspect and adjust existing kitchen cabinetry to allow a stone benchtop to be moved back into its correct position. A stone mason has advised that the cabinetry underneath requires adjustment before the stone can be repositioned. There is currently movement/misalignment in the cabinetry which appears to have contributed to the benchtop shifting and cracking at a join. Scope of Works: Inspect existing kitchen cabinetry and supports. Move and re-level cabinetry as required. Reinforce or adjust cabinet structure to support the stone correctly. Ensure cabinets are level and suitable for the stone mason to reinstall/reposition the benchtop. Advise if any additional cabinet repairs are required.

Looking for a cabinet maker to turn two wardrobes with two doors into sliding doors with mirrors & shelving and draws like my inspiration picture attached. All materials will need to be provided by you so please quote including the doors etc Also would like some shelving and draws in there as well. Will attach an image of what we are liking the look of. Approximately 2mtrs wide.

I need a cabinet-maker to build 2 custom wardrobes in my apartment. I want the same design as the ikea ones but custom sizes. Happy to discuss price if needed

I am looking for someone to go around after the cabinet maker to make all the cupboard doors straight. They all need adjustments

My bottom two drawers have come of their rails, one is completely out and the other doesn’t slide.

Hi there I am working on a new clients home and need some cabinetry made and installed. Please include photos of work you have completed in your offers or comments. Thank you

Cut out a space for a dishwasher under bench in an existing kitchen cabinet. Still need to maintain the appearance of the kitchen. I want to be able to have the remaining cupboard space under the sink as well so a small door or a blank can be installed between the edge of the dishwasher and the next door. Pillar will need to be moved across. I have some photos with the measurements. Dishwasher is 820mm high, 600mm wide and 570 deep. Parking is off street (I have a driveway)

I need a cabinet maker to repair a kitchen cupboard door and review and refit the other hinges in the kitchen to ensure they’re all operating correctly

Hi Guys, need a experienced cabinet maker to install some Cabinetry. Wardrobes, laundry, vanities. Let me know which. One you specialise in and i can forward drawings based on your experience and preferences. Start date 13th April. Most Cabinetry comes pre assembled, the wardrobes are flat packs and tall cabinet like pantry is flat pack.

I recently removed our door panel that usually covers our fridge, because its a bit of a nuisance. I would like to repurpose it to cover the areas around the fridge. The panel is Kaboodle oak latte (melamine faced particle board). I would like someone to measure and cut: 2 x smaller cabinet doors (to go above the fridge) 2 x long vertical strips (to be used either side of the fridge) I would also like the door hinges to be repositioned and installed for the 2 doors. I’ve attached photos to show the existing setup, and a mock-up of what we’re hoping to achieve for clarity.