Find a professional awning contractor in South East Perth

Need a handyman to install a retractable side awning (2000mm x 3000mm) in my side path next to the house. I’ve already bought: 1. The awning 2. A 65x65 x 2400mm steel post Job is: install the supplied steel post into a small concrete footing (this will hold the main/taller side of the awning) make a second small concrete footing approx. 3000mm away for the other end of the awning. The other end has a base plate with 4 holes and needs to be anchored into the concrete. Mount the awning between both ends and make sure it opens/closes properly Likely need to lift/remove a couple of pavers where the footings go. Awning and steel post supplied. Looking for a simple, solid install — nothing fancy, just done properly. Expecting under $150 if straightforward, but open to quotes. Photos attached.

I am purchasing an Awning from Kings and want help fitting it to 4WD

Hi looking for someone to help me install my awning to my kings roof top tent I’ve already half installed the bracket to the tent Jus need someone to help me lift the awning to measure placement of bolts on awning ,take it down , secure bolts and cover and then install properly onto bracket Shouldn’t take too long maybe a hour. It it could be done before lunch this would greatly appreciated.

Remove existing standard 2.5m awning from Campervan rhino racks and attach new 2.5m awning to rhino racks. Campervan is 2m high. If existing brackets are still in good nick then they can be reused.

Repair or replacement of timber on awning There is no asbestos

I require new paint for the inside face of my awning, underside of roof sheets, and roof rafters. Dimensions of roof is 6m x 2m. Height of awning is approx 1m. Colour required is white. See attached photos, hatched area is where paint is required. Have to supply your own paint.

eyelets ripped off in strong wind.need new ones sewn on

I have a two Bunnings Retractable Awnings 3x2m which I'd like to install onto the roof of my Garage. I've build up the awning and I only need the brackets installed - likey to be onto the roof beams/rafters which intersect into the facia/gutter? So its 4 x brackets. Rafters are standard wood house built in 2006. Approx 600m apart.

Awning needs to be installed from eaves at back of unit to prevent intense afternoon heat.

Assembling a awning onto the roof racks on prado (only people who have experience please)

Install 9 awnings that are approx 1 meter in length. Must have experience in installing awnings. The installation is in front of a verandah.

I have a 2009 Prado with rhino rack cross bars. I need to fit my 270 XL CSS Touring awning on.

Installation of 2 x 7m awnings. Removal of an existing awning of 7m. Awnings planned to be installed at a 6-8m height. Any questions let me know,

Need timber awnings to be made and installed on 1 side of the house, approx length is 3.5M for each window. With either shingles or tiles as pictured.

Install an awning to our outdoor fascia. It will need to have a timber beam attached first to make it structural and hold weight. The awning is 5m x 2.5m retractable with folding arms and crank. We are located in East Victoria Park.

Looking for someone to install awning for with material . Refer pictures .

Awning needing some repair, as the arm does not fully fold.

* Completing an unfinished work* A folding arm awnings cassette install work was carried out in backyard. Height from ground is about 2.9m. The bolting was not done properly as my bricks are hollow where the bolts are sitting. I need it professionally bolted so I can use the awning with confidence. Cassette brackets position is adjustable. My mates said it should be bolted into the mortar rather than the bricks. 🤷🤷‍♂️🤷🤷‍♂️

Not installed properly comes undone and not worked out power coñnection

This is no longer required through this app. Ta heaps Purchased a second hand awning. Needs installation please.