Find a reliable appliance technician in St Leonards NSW

We have a Miele G5500 dishwasher. It shows an “open stopcock” error onscreen and the cycle does not start. The inlet tap is open and the hose is not blocked or kinked. We believe the water inlet assembly may be faulty and may need replacing.plumber already inspected and this is not plumbing issue and not filter. You need to have the right Miele part.

The metal ring of the front loader has come out. We need someone to put it back in as the door isn’t closing properly

I need an experienced cabinetmaker or handyman to modify the existing kitchen cabinetry so that my oven can fit properly. The current oven cavity is slightly too high, meaning the back of the oven is making contact with the gas pipe and power plug. The cabinetry needs to be assessed and lowered by a few centimetres to provide sufficient clearance. Scope of work: - Inspect and measure the existing oven cavity and oven to determine the required adjustment. - Modify/cut the existing cabinetry as needed to lower the oven opening by a few centimetres. - Ensure adequate clearance for the gas pipe, power plug and oven. - Install suitable trim or finishing pieces to cover any exposed cuts and leave a neat, professional finish. - Ensure the oven fits properly within the modified cabinetry. Requirements: - Please bring the necessary tools and materials. - Experience with kitchen cabinetry modifications preferred. - Please inspect and confirm the required measurements before commencing work. Please include your quote and availability. Photos of the existing cabinetry can be provided.

I accidentally pushed the emergency drain hose inside the hole and cant get it back out. Its unplugged as well .. I have no idea what the right price is, feel free to hit me up with offers

Dishwasher is not draining, with water pooling in the bottom of the machine.

Change door hinge from right to left on fridge, Hisense

Front-load Electrolux washing machine (older model) is leaving black rubber-like marks on clothes, some coming off as small balls. I've already cleaned the drum and detergent drawer, but the problem persists. I've checked the door seal and it's intact. Need a technician to identify the source (possibly drain filter, internal seal, or bearing) and fix it.

Westinghouse fridge not cool, toilet seat/cover change, item bought

Hot & water inlet hoses & gray drain hose to connect from washing machine

Washing machine needs to level and balanced

LG top-load washing machine (model WTG9020V, 9kg, Smart Inverter direct drive) needs repair. Fault: during the WASH cycle the wash plate/agitator doesn't move at all — water fills normally and I can hear relays clicking, but no agitation. During RINSE/SPIN it works fine and spins normally. So the motor, control board and spin function are all healthy — the problem is isolated to the agitation drive. Most likely the wash plate coupling / drive block is stripped, or the shift actuator is stuck in spin mode. Looking for an experienced appliance technician to diagnose and fix. Please source the wash plate coupling and/or shift actuator for this model beforehand so it can be done in one visit if possible.

I need help connecting my washer please, price negotiable

Repair leak and replace any washers or rubbers

1. Connect washing machine to pipe 2. Install dryer wall mount 3. hanging dryer to wall mount

Bosch Series 8 Front loader washing machine - WAW28460AU/24 Issues with the main touch panel. The start / stop button is often unresponsive, it will just flash. Then after a few mins the machine will start by itself, but during the cycle may just stop again. All other buttons appear to be working fine, just the start/stop having the issue.

Ordered a new oven and just realised they don’t provide disconnection services, need a certified gas tradie to help disconnect and remove the oven.

The spring in the light range hood switch I think has broken BEKO CCB5140XA

The fisher & paykel dryer makes a loud rumbling noises when in rotation. Works fine but the noise is driving us insane. We need someone to assess the dryer, could either be the drum roller wheels are worn or motor bearings? Fisher & paykel dryer.

Bought a new dishwasher, tried to install it myself and keep getting an error and it will not finish the cycle

To replace washing machine gasket rubber