Find a reliable appliance technician in Donnybrook VIC

Need to fix the safety trigger on a whipper snipper & able to get it working - it is brand new so we won’t need any new/additional parts. Just assistance in getting it to work. Saxon - Petrol Bent Shaft Line Trimmer (Model: 1055631)

Need to change gas cook top.

New electric standalone stove to be installed. 6 to. 8 m cable may be required from Meter .

Washing machine will not do last spin. We have already cleaned it but it stops at the last cycle. Wanting someone to have a look at it and get it fixed

Hisense hwfm8012 washing machine filter drain is stuck and broken by a guy who came to fix the issue need drain cleaning and new filter drain. Please need someone how have a knowledge of it and can do a great job.

I need to install a new dishwasher in a new house.

I have a Hisense 8kg heat pump dryer coming. Model HDFS80HS I need it to be stacked on my washing machine. The stacking kit is already with me. I will need your help to get the dryer to the laundry and then stack it.

Electrolux vaccum cleaner is not turning on. On switch not working. Needs to be replaced.

Fridge turns on but doesn’t cool at all.

To uninstall the old range hood and install a new one. Its need to be a licensed electrician.

Fisher and paykel dishwasher door locked due to ? wrong parts? need help to open it

Rangehood Product Details: Baumatic 900 mm GEH9023 Need a look to see if it can be repaired or maintenance

We’ve installed the Solt 90cm rangehood canopy. The model has two air suction options, one being that of the carbon filter (recirculation) another being ducted circulation out. We want price for both the options, inclusive of material and labor with both costs broken up in quote. The rangehood itself is already fixed at its place and turns on (picture attached). You need to hold an appropriate license and must have a proper business (ABN). General handyman type of experience isn’t going to cut the mark as we don’t want to lose warranty protection because someone didn’t hold the right license or wasn’t qualified to complete the installation. Roof is metal/colorbond and the house is single story. Some manufacturer instructions on this matter are as follows, noting the preferred bidder should do their own research as well. Ducted Installation For maximum performance we recommend installing with rigid or semi rigid ducting. All ducting must be fire retardant. There are multiple options for ducting the range hood, as follows: Straight up through the tiled or metal roof, using a roof cowl. Vented through to the atmosphere through eaves, using no more than 2 × 90° bends within the ducting run. Always use the correct size ducting, and ensure that it is non-flammable ducting. For maximum performance Sôlt recommends semi rigid or rigid ducting. This rangehood is designed to use Ø 150mm ducting to achieve optimum airflow performance and minimal noise during operation. For carbon filter recirculation option: Disconnect the power supply from the wall socket andcarefully remove both grease filters. Install or replace a carbon filter by gently slotting thefilter in, and turning it clockwise to secure. Place both grease filters back into position, and thenreconnect the power supply to the wall socket. Activated carbon filter can be used to trap odours.

Hello there, I am looking for someone to help me connect my washing machine asap. The machine's pipes are smaller.

Just need to dryer stacked on top of the washer

Looking for a kitchen rangehood expert who can help in checking about the friction sort of sound may be due to fan or something else and fix

Help to install Bathroom heater

Fix the fridge as its not cooling.

I'm looking for someone experienced with gas ovens to inspect and repair my Royal Coordinate Series (Chef) gas oven. The cooktop burners are working perfectly, so the gas supply to the cooktop appears to be working fine. However, the oven itself will not ignite. It hasn't been used for a long time, and when I recently tried to use it, I turned the oven control knob and attempted to light it with a long gas lighter, but it didn't ignite. I'm not familiar with operating this older gas oven, so it's possible that I'm simply missing the correct ignition procedure rather than there being a fault. Before I engage someone for a repair, I'd appreciate it if you could let me know if there are any basic troubleshooting steps or preliminary checks I can safely perform (for example, whether there's a safety lever, ignition sequence, or gas control that needs to be operated). If the issue can't be resolved through these checks, I'd then like someone to inspect, diagnose, and repair the oven. If a visit is required, please let me know: Your call-out fee. Your estimated repair costs (where possible). Your experience working with older gas ovens. Photos of the oven are attached.

Need to cut stone bench top about 15 mm to fit new stove the bench is already cut from previous bench just need to notch out some more as new stove is slightly bigger