Find a reliable cooktop installation and repair service near you

Install new standard size oven and remove plus despose of old one. Oven is about 31kg and if needed I can help. Car space available if street parking is not. Best to have a trolly to take old one away. No stairs

Looking to replace a freestanding oven and cooktop (dual fuel). Same unit as what is currently installed. May need an isolation switch as current installation was over ten years ago. Work is preferred to be done on Monday or Tuesday. Will require relevant compliance certificates.

Looking to replace a freestanding oven and cooktop. Same unit. May need an isolation switch as current installation was over ten years ago. Work is preferred to be done on Monday or Tuesday. Will require never satay compliance certificates.

Install a gas cooktop and gas outlet

Installation of gas cooktop. No previously gas so need from scratch.

I need an experienced stonemason to install a marble benchtop and cut out the cooktop and sink area, I will have the necessary people to help carry it during installation.

Need a licensed electrician to remove cracked broken ceramic cooktop and install new ceramic cooktop 60cm

Need to fill the adjustable the size of cutout benchtop cavity as per my electrical gas cooktop

Looking for a quote from a plumber who is licensed to remove current 60cm gas cooktop (glass) and install new stainless steel cooktop.

I need to replace an old gas cooktop. I have purchased a new cooktop and need it fitted by a qualified plumber/gasfitter and a compliance certificate issued.

Looking for a electrician to replace the function selector switch on our built-in Belling IB609FP electric oven. The function knob snapped off and the switch shaft broke flush with the switch, so the switch needs replacing. Everything else on the oven was working fine before this. We have the replacement part ready (Glen Dimplex part [22102002 / 20884983]). We believe the job may involve: - Isolating power and sliding the oven out of the cabinet - Removing the control panel (it has a glass front, so please take care) - Swapping the old switch for the new one and transferring the wiring - Refitting the oven and testing each function We are open to fixing it other ways though if you can think of any. Photos of the broken knob and switch are attached.

Remove old silicon attached to marble backsplash and cooktop to existing cabinetry. Recaulk with non-staining, neutral cure silicone in white. You’ll need to supply this.

Remove old cooktop and install new induction cooktop 60cm. The current cooktop is working it just has a chip in it and hence replace needed.

We need our old cracked glass cooktop taken out and new one installed. Qualified electrician only please. We have new cooktop ready to be installed, should be plug and play. Offers please for the next week sometime. Thanks

Looking for a licensed electrician to disconnect the faulty electric cooktop and install a new unit I’ll supply. Please confirm the new model suits the existing benchtop cut-out and electrical connection before I purchase it. Quote to include removal of the existing unit, installation, testing and a Certificate of Electrical Safety. Please price disposal separately and flag any additional costs before proceeding. Please include your licence details and earliest availability.

I need a licensed gas fitter to install a new 60cm 4 burner gas cooktop. The cooktop is already purchased and on site (Esatto ECG604WS from Bunnings, natural gas, cutout 560 x 490mm, manual in the box). It replaces an existing Electrolux 60cm induction cooktop and fits the same benchtop cutout. - Existing gas supply is capped off in the cabinet under the sink (from a previous gas cooktop). Photo attached. - Remove the induction cooktop and fit the gas cooktop into the existing cutout. - Connect gas, leak test and commission all burners. - The induction cooktop is hardwired, so it needs to be safely disconnected, and the gas cooktop's electronic ignition needs a 240V power point under the bench. Please confirm if you can do the electrical part or if an electrician is needed. - Provide a Victorian Compliance Certificate on completion. Please include your Victorian gasfitting licence number in your offer. Payment through Airtasker only. Please only offer if you can arrive on time with all tools, including a gas tester. Photos attached.

We are replacing a gas and induction cooktop. The current cooktops had rounded corners. The replacements have square so it’s a minor trim of 4 corners. Caesarstone.

We would like to replace the 60cm 4 burner gas cooktop, with the new one. Dispose the old one. Due to regulation need to be installed by licensed to install gas cooktop and an invoice

I am replacing my electric cooktop for a difrent model and need an electrician to reconnect it

## Licensed Gas Fitter Needed – Gas Cooktop Installation (Kogarah, NSW) I’m looking for a **licensed gas fitter with a valid NSW licence** to help install a new gas cooktop at my house in Kogarah. **Please do not apply if you do not hold the appropriate NSW gas-fitting licence.** **Preferred date:** Saturday, 17 October 2026, during the day after 12pm. **Parking:** Driveway parking available. ### Scope of Work 1. **Remove existing gas cooktop** – I can assist with removal and disposal. 2. **Install new gas cooktop** – Electrolux 60cm Natural Gas Ceramic Cooktop (Model: EHG635BE), already purchased. 3. **Enlarge existing benchtop cut-out** – The benchtop is laminate, and the existing cut-out needs to be enlarged slightly to accommodate the new cooktop. - New cut-out width: 560 mm - New cut-out depth: 490 mm I’m a qualified carpenter and can assist with the benchtop modification using a jigsaw and circular saw, if appropriate. 4. **Connect and safety-test the cooktop** – Complete the gas connection, installation and required safety testing. Existing gas and electrical outlets are available below the cooktop. ### About the Job I’m a qualified carpenter and happy to assist with suitable preparation and other tasks to help get the job done efficiently. **I don’t think the job will take too long**, especially as I can help with the removal and benchtop modification. All gas-fitting work must be completed by an appropriately licensed professional. Please get in touch if you hold the required NSW licence and are available on the preferred date. When responding, please confirm your licence, availability and quote for the job. Thank you!