Find a reliable appliance technician in Castle Hill NSW

am looking for a qualified and licensed gas fitter to relocate an existing outdoor gas connection at my property. Please refer to the attached photo. There are currently two gas cylinders positioned against the external brick wall, and I would like the gas connection/regulator and associated pipework (circled in the photo) moved approximately 4 metres along the wall to a more suitable location.

Title: Install Samsung 11kg Washing Machine – Castle Hill (ASAP) Brand-new Samsung 11kg front-load washing machine delivered, still boxed in hallway. Need someone experienced to: * Move machine from hallway into laundry * Unbox and remove all packaging * Remove transit bolts and install supplied caps * Connect cold-water inlet and drainage hoses * Supply compatible inlet hose/fittings if required (confirm additional cost upfront) * Level machine and run a test cycle * Remove and dispose of all packaging Must bring own tools and appliance trolley. Existing laundry plumbing and power connections available. Location: Castle Hill NSW When: Today or tomorrow (within 24 hours) Budget: $150–$180 including labour and packaging removal. Any extra parts to be agreed upfront. Please confirm availability, washing machine installation experience and whether you can handle the move safely.

My Asahi Hon-Nama Robocco is broken. I suspect a blown capacitor. I need someone who understands electronics and circuit boards to help with repairing it.

I have a new 10kg washing machine. I need to level the machine to avoid noise only

The gas line need to be extended in the kitchen area from other part of the house. It's will be from the front of the house to the back.There is no gas line on the street. Experienced plumbers only.

I have a gas cooktop with four burners. One of the large burners is not lighting properly. The spark ignition is working , Gas is fine, but the burner does not ignite.

Honda 4 stroke Lawn Mower to be serviced and blades to be sharpened/replaced

Hisense front load washing machine has a rubber washer that fits between the drum and outer lip of the washing machine. There are two rings that is used to keep the rubber washer intact to avoid leakage.

ASKO D5424 Dishwasher. F11 error. Humming sound on startup but would not drain. Same symptoms happened a few years ago. The capacitor on the pump had to be replaced which fixed the issue.

Induction cooktop has some scratches, when running finger nails it slightly catches on the scratch

Washing machine samsung blockage, check the front is all clear but not sure whats blocked in the pipe further back

Samsung Front Loader washing machine drum seems loose as this is making some noise when in use. All other operations are working perfect

Our Oven's door does not close in full. Fisher and Paykal, 600mm. The issue might be from the hinge. I have attached photos.

Cleaning up gas cooktop, opening up and clearing pores.

Light at the top of the fridge is starting to leak. Model - Samsung RT32K5035WW/SA Need someone qualified to have a look and tell me why? Also, it would be great to have some assistance setting up new NBN router and trouble-shooting any problems. This would need to be after 3:30pm. Thankyou!

The buttons stop working after a few minutes and the fan stops after a few mins. It also looses connection with the app. All lights are on though

I need someone to cut & alter the edges of the opening in my kitchen bench (stone) to allow for installation of a new cooktop that requires slightly bigger size cutout. Approx. 5mm to 10mm extra space required across depth and width for allowing standard 60cm cooktop from major brands to be installed easily.

Need to replace 60cm induction cooktop and oven underneath. I have ordered new ones. Need electrian to install both.

Supply and install heating element in my oven. It is behind the fan at the back of the oven. Less than five years old. DEVANTI 70L Electric Oven Built in Wall Forced Grill Stainless Steel Convection Size: OSFA SKU: 746927290 Serial No. 20200430066 Power 200W SGS90246-EA

The Fisher & Paykel washing machine makes a very loud noise during the spin cycle. Even when I select the Drum Clean cycle (with no clothes inside), there is still quite a loud noise during the spin cycle. I’ve already checked the filter and didn’t find any foreign objects. This washing machine was bought about 4 years ago. The quote includes the onsite inspection fee and minor repairs. If any major parts need to be replaced, I understand that the cost of those parts will be charged additionally.