Find a reliable appliance technician in West Adelaide

The dishwasher looks like now it is not draining properly after finishing the cycle, so I believe it may using the dirty water for the next cycle, which results the dishes comes out unwashed.

Have purchased new blades for Victa 18" Classic 500E but having trouble removing existing blades. Require removal of existing and installation new blades (provided) There is some petrol in tank so unsure if needs to be drained first (to tip on side etc) New blades are Victa CA09506B. Pls hit me up if any questions.

I’m looking for qualified tradespeople to remove an existing Rinnai gas heater and replace it with a built-in electric fireplace at my home. The existing gas heater is approximately 910 mm wide × 650 mm high. Photos can be provided. The job would ideally include: -Safe disconnection and capping of the existing gas supply by a licensed gas fitter -Removal and disposal of the existing Rinnai gas heater -Supply and installation of a built-in electric fireplace with realistic flame effect -Any required electrical work/power connection by a licensed electrician -Necessary modification of the existing opening/wall to accommodate the new fireplace -Making good/plastering and neat finishing around the new fireplace -Testing and commissioning of the installation -Relevant compliance certificates for gas/electrical work -I am open to recommendations regarding the brand and model of electric fireplace suitable for the existing space. When quoting, please specify: -Brand and model of the electric fireplace you recommend -Fireplace dimensions and heating capacity -Price of the fireplace -Labour/installation costs -Whether gas disconnection, electrical work, removal/disposal and wall finishing are included -Any items that are not included in your price I am looking for a good-quality, modern electric fireplace rather than a basic electric wall heater. Licensed and insured tradespeople only, please.

Oven Door / Oven Stability Issue The oven moves forward and tilts when the oven door is opened. The oven door mechanism, hinges and mounting/supports require inspection to identify the cause of the issue. Scope of Works: Inspect the oven door hinges and mounting/supports. Identify the cause of the oven moving and tilting forward. Repair or secure the oven as required. Replace any faulty components if necessary, subject to approval.

Bosch dishwasher displays e24 error code. Have checked and cleaned filter etc, code still appearing.

I have a Domain electric oven and one of the control buttons/switches has a bad contact. As a result, the oven keeps switching itself off while in use. I’m looking for someone experienced with oven/appliance repairs to diagnose the issue and repair or replace the faulty button/switch if possible. The oven is otherwise working normally.

Remove the the existing the dishwasher and install the other one

When the oven door is opened, the oven moves forward and tilts towards the front. Please inspect the oven door hinges, mounting points, and supports to identify the cause of the issue and provide a suitable repair to ensure the oven remains stable and secure when the door is opened.

I need to swap over an old dishwasher for a new dishwasher. There’s no plumbing required. It simply removing the old one from the cavity and installing the new one… When I say simply the old one has been a right pain in the ass to remove I don’t quite know what stopping it but due to back injury I can’t keep forcing it. FYI zero issues if you break the old one getting out… I honestly do not care just want it gone

Need a licensed appliance technician to install a replacement 240V AquaStop inlet hose on a Bosch Serie 6. Part is already purchased. Invoice required

Have removed the rubber seal of the washing machine but can't get it back on...

Baumatic BDW66S dishwasher seal needs to be put screwed back on lower part where the door hinges.

See photo attached for installation details

Door system of the washing machine has trouble automatically locking it prior starting the cycle.

Photo attached. Kitchen renovation needing the gas pipe cut back and capped. Will require some excavation of the brick wall (double brick with cavity) Then capping with 15mm bpress gas cap + testing the gas line with just a couple photos of holding pressure. Don't need the wall patched. I'm a plumber just in Melbourne and can't get to it in time for the cabinet maker. Would appreciate the help on this one. It's in Hilton an empty house.

Require a license professional to safely disconnect and remove Rennai 2001 Flued gas heater from living room.

Disconnection of built in 60cm oven (8 years old) - it doesn’t have a wall plug, it is wired in and goes to a cabling loom. Install new 60cm oven in place (also hardwired) New oven is Westinghouse WVE6516SD.

I have a new 10kg washing machine that needs levelling as it's moving when spinning. Someone that is fit as it's super heavy to pull in/out of the space it's in.

Fix washing line It’s already set up just needs some extra work I’ll pay for the bolts that need to be fixed on top of the 50

We have lost our remote to open the gate couple of months back. I rang the company and they have suggested me a remote but I do not know how to programme it. I am looking for someone who can programme it. The remote works for two gates. One is for our house gate and the other gate is for the common area to enter. We are using the remote with out spare one at the moment. Brand name is DEA.