Find experienced glaziers in Central London

I have a glass filter plate measuring approximately 5 cm × 5 cm with a thickness of about 1 mm, and I would need it cut into smaller squares of approximately 1 cm × 1 cm each

Draught proofing internal door with draught excluder or similar (strong draughts, very uneven on bottom, side and top) - Check new front + back doors for draughts (Most likely adjustment of compression / latch / strike plate, depending on results open to other solutions) Additional, if possible: - Remove 1x floating shelf, fill in holes and paint over holes (paint provided) - Install 1x new floating shelf 300mm over remaining shelf

Need a new mirror and cut it to replace the current mirror on the over sink cupboard .attached pics

Want to fit dog door in a singlendouble glazed doo, as the lock is also broken probably a full.replacment

Small chip on mirrored tv stand

Repair to kitchen double glaze door (hinges detaching from frame) and sliding door lock not working

To cut the glass to my size

Back of my iphone is smashed

Little double window glass cracked from the heat

Looking to replace the two glass panels in the hall door with frosted glass as well as replacing the glass panel above the door with frosted glass. Must be toughned double glazed Thanks. I did get the measure measurements Panel above door Height: 51cm Width: 84cm 2 door glass panels; Height 91cm Width: 17cm

Moisture inside double glazed window.

Install a cat flap on double glazing glass door

1. 2 panes in a sash window have blown and misted up 2. Front door glass pane needs replacing Both timber

Looking for someone to replace broken glass panes (one patterned, 3 clear) and repair/replace a rotted wooden sash on a sash window in my flat in Dulwich. Ideally someone with experience in timber sash windows. Happy to provide more photos. Budget is flexible for the right person.

I have 2 glass sheets Size : 37 inches length 23 inches width (Each one) I have used these for my coffee tables previously. I have changed the tables now and the width of the glasses needs cutting, length is still ok.

Need help to install door bottom rails for draught proofing

The glass was shattered for my oven the bottom part of hotpoint

I have some UPVC bay windows and the old caulk/sealant that connects the UPVC trim to each other has cracked and split. It is now causing a draft. I would like someone to remove the old caulk, fit backing rod foam (if needed) and reseal the joints.

Glass cut to size to shush window 25cm /25cm

Remove and dispose of old glass in the four panes shown in the attached pictures 1 and 2, and supply and replace all four with clear glass. Size of the three full-size panes is approx 22cmx29cm. Block of flats is 1930s but I've no idea if the clear glass in the first image is original or not. Glass appears to be slightly green tinged (pic 3), and is 3mm thick (pic 4). Wood recently repainted (oil-based gloss) so looking for someone who is going to do a neat job with the putty and not cause me to need to ask you to pay to have the frames repainted. You'll need to bring a small step ladder as I don't have one. For info in case not obvious, windows open inwards (over sinks in both cases).