Find a professional gate installation in London

I have a steel gate and the hinge has come away from the steel post. It would need to be welded back on

Install BabyDan MultiDan stairs gate at top of stairs. One side: solid wall Other side: wooden stair post (newel post) Drilling required since it is a wall mounted gate. Installer must bring drill and appropriate tools needed for the job Need secure installation suitable for child safety

Fit a gate mate lock to a garden gate

Add hinges and gate fixtures to a small section of fence to turn it into a gate. Install a piece of wood between the remaining fence and the wall of the house to prevent the fence from sagging.

Small Front Porch Gate Needed Looking for a small gate to install at the front porch of my home. Ideally something sturdy, secure, and visually appealing to match the exterior. Open to different materials such as wood or metal, as long as it’s durable and weather-resistant. The gate should be suitable for a standard porch entrance and easy to install. Please get in touch if you have something available or can build one to size.

The gate to our backyard moves due to the weather causing it to expand/contract. This movement makes the lock too short to hook into the strike plate. I think the gate hinges need adjustment so the gate fully closes and doesn't swing open. See the photos.

To Clean, Prime and Paint Metal gates, which are the entrance to the communal flat carpark.

My garden gate is bowing and sagging. The vertical boards have bowed and there is sagging on the latch side. Looks like diagnal braces need to be added and maybe a tension rod.

Installing x2 stairgates at top and bottom of stairs Requires drilling into wall on one side and requires mounting to an awkward / uneven spindle staircase banister on the other side

My garden gate is bowing and sagging. The vertical boards have bowed and there is sagging on the latch side. Looks like diagnal braces need to be added and maybe a tension rod.

We have two garden gates needing attention. One is aluminum and attached to house on one side and a post on the other. It is at an angle and a new post probably needs to be put in to connect to and straighten up. The other gate needs the lock realigned.

I am reaching out from a retailer and we need to have a hinged wooden safety gate supplied and installed at the top of the staircase in our retail store in Soho, London to comply with our companies health & safety regulations

Install two baby gates, need drilling into the wall

Hi, I am looking for someone to install a metal pressured mounted gate. no screw or hole needed. If you are available today or tomorrow tha will be perfect. Thanks

Hi Namita, i would love to complete this job for you, this would ideally be split over two days, if i remember correctly the door is slightly spit where the hinges are so this would need to be glued and clamped i could pop over on friday for 25 mins/half an hour to glue and clamp the door as well as take a look at the gate i could then return on sunday to complete the rest of the task as by then the glue would of had enough time to set up please let me know if this works kind regards Geoff

I need some floating wooden floor boards lifted to investigate a water leak.

We are seeking a like-for-like replacement for a very old post and chain fence. I've attached photos for your consideration. We would like to re-use the chain as there is nothing wrong with it. The fence posts, however are apparently rotten at the base and have fallen over or are in the process of falling. We will need 3 Fence posts, 5 eyelets and a 90 cm wide gate. We'd like the existing fence removed and taken away.

We want to remove the old garage gate and replace this with a wooden gate that opens inwards at the middle. The door to the side can we reused, but it will need refitting and hinges replaced. We would like to replace the padlock with a Yale smart lock. The new gate should be 7-8ft. The existing is 6ft.

Some of the roofing sheets on my garage are damaged and need replacing. There’s 8 sheets in total but only the front ones are damaged. Need the damaged ones removed and new ones nailed into place.

The keys to the lock a metal gate of the property have been misplaced, and I need a new simple slide latch gate bolt installed on it. The gate is is metal/steel.